summaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: move dragino2 from legacy to genericKarl Palsson2016-10-133-8/+10
| | | | | | Tested on real hardware with r1804. Signed-off-by: Karl Palsson <karlp@etactica.com>
* apm821xx: replace recovery image for the MBL with initramfsChristian Lamparter2016-10-134-118/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "images: bump default rootfs size to 256 MB" a1f83bad606411a561e8e60110c71232b1a28aa2 caused a crash during boot for the recovery images. This is because both variants of the MyBook Live only have 256MB of RAM and for the recovery option, the ext4 rootfs was simply stored in the RAMDISK. This patch replaces recovery image for the MBL with an initramfs kernel. In order to boot the initramfs (for recovery or development): 0. copy the initramfs and device tree into tftp's server directory # cp *-initramfs-kernel.bin to /tftp-server/mbl.bin # cp *-ext4-kernel.dtb to /tftp-server/fdt.bin 1. Connect the MyBook Live (Duo) serial port. (Warning! Use a 3.3v level shifter). 2. Hit Enter during u-boot and insert these three lines: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; # tftp ${kernel_addr_r} mbl.bin; tftp ${fdt_addr_r} fdt.bin # run addtty addmisc; bootm ${kernel_addr_r} - ${fdt_addr_r} Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: 64: enable pci hotplug and acpipnpYousong Zhou2016-10-131-7/+9
| | | | | | | | | | | | | | | | | | | | | | This will allow dynamically adding/removing at least virtio-net pci devices which are quite the norm in cloud environment with QEMU/KVM netdev_add bridge,id=wan2,br=br-wan,helper=/home/yousong/.usr/libexec/qemu-bridge-helper device_add virtio-net-pci,id=devwan2,netdev=wan2,mac=11:22:33:22:11:00 The config was formed by selecting target x86/64 first, then select CONFIG_HOTPLUG_PCI and CONFIG_HOTPLUG_PCI_ACPI with make kernel_menuconfig CONFIG_TARGET=subtarget The following text tries to explain how the current config was formed 1. CONFIG_PCI_LABEL and CONFIG_ATA_PIIX were removed because they were already enabled in x86 platform config 2. CONFIG_ATA_SFF was removed because it was enabled in generic config 3. CONFIG_NLS was removed because it will be selected by CONFIG_PCI_LABEL Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* tools: remove old mkdosfs symlink from dosfstoolsÁlvaro Fernández Rojas2016-10-124-4/+4
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx: add userspace support for D-Link DIR-869 A1, generate imagesFlorian Beier2016-10-116-1/+25
| | | | | | Signed-off-by: Florian Beier <beier.florian@gmail.com> [Matthias Schiffer: fix factory image, improve commit message] Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add kernel support for D-Link DIR-869 A1Matthias Schiffer2016-10-117-0/+193
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add back SEAMA header checksum fix (as used on ramips)Matthias Schiffer2016-10-111-0/+17
| | | | | | | | The D-Link DIR-869 A1 doesn't accept images with the jffs2 marker added after the checksummed range, so we need to include it in the checksum and fix it on first boot. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: avoid double lzma compression of kernel for SEAMA imagesMatthias Schiffer2016-10-111-1/+1
| | | | | | | | Use relocation loader instead of lzma loader. Tested on D-Link DIR-869 A1. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add relocation loaderMatthias Schiffer2016-10-112-0/+15
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: clean up SEAMA image build codeMatthias Schiffer2016-10-111-34/+18
| | | | | | | | | | | Split seama-factory and seama-sysupgrade into smaller pieces (similar to the ramips code) to make the image generation more flexible. Also use standard pad-offset instead of adding a block of zeros at the beginning of the image that is later cut off again. Standard pad-rootfs can be used as the seal header doesn't contain an image size or checksum. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* lantiq: fix lantiq-dsl output spamMathias Kresin2016-10-111-1/+1
| | | | | | | | | | | | | | | | | In case the adsl/vdsl service is disabled intentional, the output is cluttered with the following message multiple times if the status of the dsl line is queried: killall: vdsl_cpe_control: no process killed If the dsl line status is queried by LuCI, the logfile is spammed with the message. Fix the issue by using killall in quite mode. In quite mode killall still returns a non-zero value if the to be killed process can not be found so that existing logic based on the return value still works. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: build image for Archer C7 v2 ILAmir Rachum2016-10-091-1/+11
| | | | | | | TP-Link uses a different region coding mechanism for IL firmware for the Archer C7 v2. Instead of of setting the region, they set a different TPLINK_HWREV. Signed-off-by: Amir Rachum <amir@rachum.com>
* lantiq: fix BTHOMEHUBV2B default packagesMathias Kresin2016-10-061-1/+1
| | | | | | | | | | Due to the introduced double whitespace the default package selection isn't applied. This leads to errors like a not working networking because of a missing swconfig binary. Fixes FS#208. Signed-off-by: Mathias Kresin <dev@kresin.me>
* at91: Remove u-boot from platform images folderBen Whitten2016-10-067-836/+0
| | | | | | | Removes the bootloader from the images section as its now in packages/boot with the others. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* ipq806x: fix wlan mac for Netgear R7800Pavel Kubelun2016-10-061-0/+3
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* lantiq: fixup last commitsMathias Kresin2016-10-055-9/+9
| | | | | | | Revert the rename of unrelated device tree nodes. Rename the missed leds of the Speedport W 504V Typ A. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix usb leds/triggerMathias Kresin2016-10-054-8/+11
| | | | | | | | | | | Add USB led aliases to boards having an led which is meant to be used as USB led according to the manuals. Remove the kmod-ledtrig-usbdev from the default package selection for boards not having an USB led. Add the kmod-ledtrig-usbdev to boards where it is missing. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use aliases device tree node for ledsMathias Kresin2016-10-0536-285/+277
| | | | | | The chosen node is clearly the wrong place for aliases. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: cleanup led handling functionsMathias Kresin2016-10-053-19/+22
| | | | | | | | | Use a more generic name for the lantiq_get_dt_led_chosen function. Drop the lantiq_is_dt_led_chosen function. The lantiq_get_dt_led function can be used to achieve the same. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: board.d: apply alphabetical order to led fileMathias Kresin2016-10-051-12/+12
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* zynq: fix maintainer email addressJo-Philipp Wich2016-10-051-1/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* zynq: convert to new image build codeJo-Philipp Wich2016-10-055-97/+39
| | | | | | | | | | | | | | | | | | Convert the Zynq target to use the new image build code in order to fix broken image generation after 9945a1dca5bb6bc522393f7583baf3a64df6ce11 changed the handling of CPIO images. Also remove the misapplied ubifs feature flag since the image generation is not using UBIFS for building FIT images. As part of the conversion, move the DTB building and the uImage ramdisk generation into separate build steps which can be generalized and shared with other targets, like APM821xx, in the long run. Also remove the legacy profile declarations and use new-style per-device profiles which will allow different package sets per image in the future. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: add missing config symbol (partial forward port of d2f4479870)Felix Fietkau2016-10-041-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbols for Linux 3.18 (like d2f4479870)Felix Fietkau2016-10-041-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbols for Linux 4.1Jo-Philipp Wich2016-10-041-0/+3
| | | | | | | Add some missing symbols to the generic 4.1 kernel config which got triggered by the introduction of the hda-intel sound module. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: backport usbport LED trigger from 4.9Rafał Miłecki2016-10-044-0/+931
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: add support for Zyxel NBG-419N2 (WAP3205v2)Klaus2016-10-046-0/+134
| | | | | | | | | | | applied bb-final-ramips-add-zyxel-nbg-419n2.patch from 123serge123, found at https://yadi.sk/d/1ZV0lKJwbTE65; see https://forum.openwrt.org/viewtopic.php?pid=246905#p246905, modified slightly to fit to CC release and to new lede build system: image/rt305x.mk include file is used now changed NBG-419N2.dts format to fit style of other dts files Signed-off-by: Klaus <k-laus@quantentunnel.de>
* ar71xx: update kernel config symbolsPiotr Dymacz2016-10-041-1/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: fix boards order in lib/upgrade/platform.shPiotr Dymacz2016-10-041-134/+134
| | | | | | Keep also case sections in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: cleanups in lib/upgrade/platform.shPiotr Dymacz2016-10-041-266/+264
| | | | | | | | | This includes: - code style fixes - fix boards order within case sections Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: comsetic cleanups in files/arch/mips/ath79/{Makefile,machtypes.h}Piotr Dymacz2016-10-042-422/+422
| | | | | | Keep everything in alphabetical order and aligned in columns. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: cleanups in etc/board.d/01_ledsPiotr Dymacz2016-10-041-173/+126
| | | | | | | | | This includes: - use of local 'board' variable in LED names, wherever possible - merge of boards with exactly the same LED configuration Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix LED names for GL Innovations boardsPiotr Dymacz2016-10-047-28/+28
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: fix code style in etc/board.d/01_ledsPiotr Dymacz2016-10-041-160/+38
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: combine boards with the same config in etc/diag.shPiotr Dymacz2016-10-041-62/+24
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: cleanups in etc/diag.shPiotr Dymacz2016-10-041-120/+137
| | | | | | | | | This includes: - code style fixes - use of local 'board' variable in LED names, wherever possible Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: fix boards order in etc/board.d/02_networkPiotr Dymacz2016-10-041-231/+231
| | | | | | | | Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: cleanups in etc/board.d/02_networkPiotr Dymacz2016-10-041-300/+177
| | | | | | | | | | | This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: rework etc/board.d/02_networkPiotr Dymacz2016-10-041-533/+554
| | | | | | | | | | Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* mvebu: fix sysupgradeAaron Curley2016-10-041-0/+2
| | | | | | | | | | | | | | sysupgrade command fails due to missing U-Boot environment-processing binaries on sysupgrade ramdisk. The missing binaries result in the following output: Switching to ramdisk... Performing system upgrade... ash: /usr/sbin/fw_printenv: not found ash: fw_setenv: not found ash: touch: not found cannot find target partition Fixes FS#197. Signed-off-by: Aaron Curley <accwebs@gmail.com>
* ramips: Add support for Phicomm K2 PSG1218Xuefu Lin2016-10-047-0/+136
| | | | | | | | | - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
* ntiq: make i2c-lantiqi driver compile againHauke Mehrtens2016-10-031-9/+9
| | | | | | | It missed some changes needed for kernel 4.4. This is only used by the Falcon SoC and not for the xRX SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: use the latest XHCI doorbell patch sent for upstreamRafał Miłecki2016-10-025-371/+158
| | | | | | | The main difference is it supports DT binding. This allows us to use DT for specifying controller and the new standalone USB 3.0 PHY driver. Thanks to that we don't need out of tree patch adding PHY initialization to the controller driver anymore.
* bcm53xx: drop unneeded fix for usb3-lpm-capable DT propertyRafał Miłecki2016-10-012-67/+14
| | | | | | | This problem has been fixed by upstream commit 757de492f2d ("xhci: fix platform quirks overwrite regression in 4.7-rc1"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: switch to standalone USB 2.0 PHY driverRafał Miłecki2016-10-014-128/+142
| | | | | | | This drops built-in support for USB 2.0 PHY and starts using separated driver that was upstreamed & backported some time ago. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add patch specifying USB controllers in DTRafał Miłecki2016-10-012-4/+64
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport BCM5301X patches from 2019-09-30Rafał Miłecki2016-09-308-30/+471
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netfilter: fix file conflicts between kmod-ipt- and kmod-nft- packagesMatthias Schiffer2016-09-303-0/+3
| | | | | | | | The nf_reject_* and nf_nat_masquerade_* modules are moved into the corresponding kmod-nf- packages. Appropriate dependencies are added to the kmod-nft- packages. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: update to v4.4.23Álvaro Fernández Rojas2016-09-3012-55/+51
| | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on brcm2708/bcm2710 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.22Stijn Segers2016-09-3010-27/+28
| | | | | | Forgot to update kernel-version.mk, so updated patch. Compile-tested on x86/64 and ar71xx; run-tested on x86/64 and ar71xx. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
generated by cgit v1.1 at 2024-11-15 04:43:59 +0000