summaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: 3.14: update bcm47xxpartHauke Mehrtens2014-08-185-2/+147
| | | | | | | | It it used by brcm47xx and bcm53xx targets, so put patches in generic. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42212
* brcm63xx: enable fallback sprom for Speedport W500 VJonas Gorski2014-08-1845-71/+78
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42211
* brcm63xx: tag images/dtbs with profilesJonas Gorski2014-08-181-30/+40
| | | | | | | | | | This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
* brcm63xx: add profiles for DTB supported devicesJonas Gorski2014-08-1818-162/+180
| | | | | | | | | Remove generic profiles and add profiles for each DTB supported device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42209
* brcm63xx: move generic profiles to top dir and remove smp profilesJonas Gorski2014-08-1815-100/+0
| | | | | | | | | | Use generic profiles for brcm63xx instead of having similar profiles for each subtarget. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42208
* brcm63xx: simplify HG556a image generationJonas Gorski2014-08-181-13/+4
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42207
* brcm63xx: fix HG556a boards and remove fallback boardJonas Gorski2014-08-1821-148/+43
| | | | | | | | | | | | This changes board info to match the Wiki http://wiki.openwrt.org/toh/huawei/hg556a, removes the no longer needed fallback board and fixes HG556 Ralink eeprom extraction. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: rename partitions instead] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42206
* brcm47xx: image: build alternative TRX using less optimized LZMAHauke Mehrtens2014-08-181-0/+8
| | | | | | | | | | | | | | | | | There is a group of devices that lzma-loader doesn't work with. They simply hang at "Starting program at 0x80001000" which is really hard to debug and we didn't find any solution for this for years. Broadcom doesn't use lzma-loader on these devices anyway. They decided to drop lzma-loader and use less optimal LZMA compression that can be handled by CFE itself (it doesn't use dictionary). So support these devices we will need kernel compressed with different parameters and trx without a loader. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42205
* brcm47xx/bcm53xx: improve descriptionHauke Mehrtens2014-08-182-1/+6
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42204
* bcm53xx: remove kernel 3.10Hauke Mehrtens2014-08-187-1334/+0
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42203
* brcm47xx: update to kernel 3.14Hauke Mehrtens2014-08-181-1/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42202
* ramips: add omni plug ledsJohn Crispin2014-08-181-0/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42201
* ramips: Add support for Omnima MiniPlugJohn Crispin2014-08-184-0/+233
| | | | | | | | This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk> SVN-Revision: 42200
* ramips: fix switch config for Edimax 3G-6200nJohn Crispin2014-08-181-1/+1
| | | | | | | | Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42194
* ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMACJohn Crispin2014-08-181-3/+1
| | | | | | | | | | | | This sets the MAC address of the WLAN interface to the "official" primary MAC address (the one on the label under the devices, and the one used with the stock firmware). The MAC address used so far (primary-1) isn't even used at all with the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the WAN interface (like OpenWrt does with this patch). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 42193
* ralink: clean up HAME profiles, remove unnecessary packages.John Crispin2014-08-181-4/+2
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42192
* ramips: add mpr-a1 to default profileJohn Crispin2014-08-181-0/+1
| | | | | | | | Add hame mpr-a1 to default ramips profile. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42191
* ramips: Hame: change LED name mpr-x -> hameJohn Crispin2014-08-184-8/+8
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42190
* ar71xx: build factory image for EnGenius ESR900 and ESR1750John Crispin2014-08-181-1/+24
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 42189
* lantiq: update to 3.14John Crispin2014-08-1835-0/+16059
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42188
* octeon: update to 3.14John Crispin2014-08-1813-0/+330
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42187
* ramips: make use of the new board detection layerJohn Crispin2014-08-182-13/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42186
* ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 boardJohn Crispin2014-08-181-0/+1
| | | | | | | | | | The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the mini-PCIe device. Not configuring the LED pin inside the platform data makes it impossible to configure it through any standard OpenWrt tool. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 42184
* lantiq: generate unique ARV7519RW22 firmwareJohn Crispin2014-08-185-40/+14
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42183
* lantiq: add support for xrx200 firmware depending on soc typeJohn Crispin2014-08-181-0/+27
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42182
* lantiq: export soc typeJohn Crispin2014-08-181-0/+25
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42181
* lantiq: improve ARV7519RW22 supportJohn Crispin2014-08-182-34/+18
| | | | | | | | | | | | | - use full board name - rename uboot-env partition - add dsl_fw partition - remove unneeded pinmux groups - move gigabit ethernet to LAN - load mac address from mtd Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42180
* ramips: add a workaround to fix failsafe on RT5350John Crispin2014-08-181-1/+18
| | | | | | | | | Due to TCP connections not working when VLAN is disabled, this is needed to get failsafe functional. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42179
* ramips: enable additional GPIOs on HAME MPR-A1John Crispin2014-08-181-1/+4
| | | | | | | | | | | | | | | According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose 6 unused GPIOs, only one of them working as configured in the current DTS. This patch enables GPIO22-26. Tested on hardware. [1] http://i.imgur.com/kHVW2Ox.jpg [2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698 Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42178
* ar71xx: changed the EnGenius ESR900 mtdparts to match that of the ESR1750 ↵John Crispin2014-08-181-1/+1
| | | | | | | | since they have the same flash layout Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 42177
* ralink: add back the gpio_export_named() patch for 3.14John Crispin2014-08-181-0/+177
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42176
* adm8668: revert changeset 34554Florian Fainelli2014-08-164-164/+205
| | | | | | | | | The conversion was not 100% correct and leads to u-boot failing to verify the CRC, revert that change for now. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42170
* ar7: remove 972-cpmac_fixup patchFlorian Fainelli2014-08-161-221/+0
| | | | | | | | | | | | This patch is causing more harm than good on most AR7 routers out there, better have no manageable switch rather than no ethernet connection, at least for now. Fixes #16523, #5927 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42168
* brcm47xx: image: update list of Netgear WNR* firmwaresHauke Mehrtens2014-08-141-2/+6
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42165
* brcm47xx: fix brcm47xx.legacy buildHauke Mehrtens2014-08-142-4/+4
| | | | | | | | we should check for ssb here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42164
* imx6: update kernel configLuka Perkov2014-08-111-3/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42149
* imx6: kernel: add GW5520 supportLuka Perkov2014-08-118-2/+441
| | | | | | | | | | | | | | | | | | | | | | | | The GW5520 is a small form-factor single-board computer with the following features: * 70x100mm form-factor * IMX6DL 800MHz SoC (IMX6Q optional) * 512MB 32bit DDR3 SDRAM (up to 2GB optional) * 256MB NAND FLASH (up to 2GB optional) * Gateworks System Controller * 2x front-panel Intel i210 GbE adapters with passive PoE support * 2x MiniPCIe sockets with USB support * 2x front-panel USB * 1x rear-panel full-size HDMI connector * 1x front-panel bi-color user LED * 1x front-panel user pushbutton * 1x rear-panel barrel jack for power * 1x Application connector with: * 2x TTL level UARTs * 10x TTL level Digital IO Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42148
* imx6: kernel: add GW16083 Ethernet Expansion Mezzanine supportLuka Perkov2014-08-119-1/+1844
| | | | | | | | | | | | | | | | The GW16083 Ethernet Expansion Mezzanine adds the following to supported Gateworks baseboards: * 7-port Ethernet Switch * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module) * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected) This series adds support for a phy driver that adds support for ENET5/ENET6 PHY adding initialization for those PHY's and a polling mechanism that detects SFP insertion and configuration. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42147
* imx6: kernel: add GW16082 miniPCI Expansion Mezzanine supportLuka Perkov2014-08-112-0/+114
| | | | | | | | | | The GW16082 miniPCI Expansion Mezzanine has the INTA/B/C/D IRQ's reversed from the PCI standard. This will soon be resolved in the bootloader via devicetree, but in the meantime this will work around the issue. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42146
* imx6: kernel: fix occasional link failureLuka Perkov2014-08-111-0/+38
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42145
* imx6: kernel: backport an upstream pci hang fixLuka Perkov2014-08-111-0/+86
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42144
* bcm53xx: add b43 wifi supportHauke Mehrtens2014-08-112-1/+2
| | | | | | | | Now it is possible to use b43 wifi. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42143
* bcm53xx: remove BCM4360 from PCI idsHauke Mehrtens2014-08-111-2/+1
| | | | | | | | bcma does not support this card and b43 hangs when probing this card. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42142
* add support for the NC-LINK SMART-300Imre Kaloz2014-08-1113-0/+251
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 42130
* brcm63xx: remove now obsolete board fixup codeJonas Gorski2014-08-1166-244/+172
| | | | | | | | | Now that we migrated all users to dtb based detection, we can drop the board fixup code. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42129
* brcm63xx: use dtb board detection for neufbox 4Jonas Gorski2014-08-1148-433/+96
| | | | | | | | This splits up neufbox 4 for now into two images, one for each OEM. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42128
* brcm63xx: use dtb board detection for NB6Jonas Gorski2014-08-1125-47/+44
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42127
* brcm63xx: use dtb board detection for HW556Jonas Gorski2014-08-1121-83/+151
| | | | | | | | | | This requires individual images for each board version for now. Linux partition was shrunk to ensure writing thewrong image won't erase wifi calibration data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42126
* brcm63xx: replace CFEFIXUP usage with dtb based detectionJonas Gorski2014-08-1156-104/+190
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42125
* brcm63xx: move bcm96328avng to dtb detectionJonas Gorski2014-08-112-3/+12
| | | | | | | | Use appended dtb for board detection for bcm96328avng. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42124
generated by cgit v1.1 at 2024-12-02 04:30:34 +0000