summaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* preliminary 3.12 supportImre Kaloz2013-10-24175-0/+33916
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38528
* kernel: make swconfig checkpath compliantFlorian Fainelli2013-10-241-35/+40
| | | | | | | | Fix the warnings and errors reported by checkpatch on swconfig.c Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 38523
* imx6: ventana boards use kmod-sky2Luka Perkov2013-10-231-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38522
* imx6: use more descriptive function nameLuka Perkov2013-10-231-6/+6
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38521
* imx6: use more common name for ubi(fs) imagesLuka Perkov2013-10-231-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38520
* imx6: fix pcie interrupt mappingLuka Perkov2013-10-231-4/+4
| | | | | | | | | The interrupt mapping for legacy interrupts was backwards causing interrupts to be mapped improperly behind a PCIe to PCI bridge (ie GW16082 mezzanine). Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38519
* imx6: add support for building uImageLuka Perkov2013-10-231-5/+25
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38518
* build: make MkuImage more genericLuka Perkov2013-10-231-8/+8
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38516
* imx6: enable SATA supportLuka Perkov2013-10-231-1/+5
| | | | | | | | | | Enable SATA support (for IMX6D/IMX6Q) static in the kernel. It seems there are some issues causing the driver to not load properly when built as a module which still need to be worked out. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38515
* imx6: enable cpufreqLuka Perkov2013-10-231-6/+10
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38514
* imx6: enable i2c-devLuka Perkov2013-10-231-0/+1
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38513
* imx6: remove obsolete filesLuka Perkov2013-10-233-1222/+0
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38512
* imx6: pcie driver fixupsLuka Perkov2013-10-237-24/+235
| | | | | | | | Add upstream patches needed for PCIe through a switch. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38511
* imx6: fix symlink of dtb filesLuka Perkov2013-10-231-1/+1
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38510
* ar71xx: rename 'nand' subtarget to 'mikrotik'Gabor Juhos2013-10-236-3/+3
| | | | | | | | | | | | | It is for Mikrotik devices only, rename the subtarget to reflect that. Also fix the wget2nand script to use the new image names. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38509
* ar71xx: change title and description for NAND subtargetGabor Juhos2013-10-231-3/+3
| | | | | | | | | | | | The nand subtarget supports Mikrotik boards only. Change the title and the description to reflect that. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38508
* ar71xx: remove 'Target/Description' from main MakefileGabor Juhos2013-10-231-4/+0
| | | | | | | | | | | | Ensure that menuconfig shows the correct help text for subtargets. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38507
* kernel: update 3.10 to 3.10.17Gabor Juhos2013-10-2342-374/+159
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38506
* brcm47xx: b44: detect external phy by bit set in DevControl registerHauke Mehrtens2013-10-228-73/+147
| | | | | | | | | | Without this patch we treated only phy addr 30 as an external phy, but there is a register to check that. Now we do not have to try to reset the switch to check for an external switch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38502
* x86/generic: remove 3.8 configGabor Juhos2013-10-221-197/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38501
* x86/generic: switch to 3.10.15Gabor Juhos2013-10-221-1/+1
| | | | | | | | | | Based on 'kernel: update x86 generic to 3.10.13' patch from http://patchwork.openwrt.org/patch/4129/ Signed-off-by: Ulrich Weber <uw@xyne.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38500
* x86/generic: add kernel config for 3.10Gabor Juhos2013-10-221-0/+204
| | | | | | | | | | Based on 'kernel: update x86 generic to 3.10.13' patch from http://patchwork.openwrt.org/patch/4129/ Signed-off-by: Ulrich Weber <uw@xyne.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38499
* kernel/3.10: add missing config symbolGabor Juhos2013-10-221-0/+1
| | | | | | | | | | Based on 'kernel: update x86 generic to 3.10.13' patch from http://patchwork.openwrt.org/patch/4129/ Signed-off-by: Ulrich Weber <uw@xyne.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38498
* imx6: make symlinks for dtb'sLuka Perkov2013-10-221-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38496
* ar71xx: Fix sysupgrades for Allnet and OpenMesh devicesGabor Juhos2013-10-202-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Both Allnet and OpenMesh sysupgrade uses fw_setenv from uboot-envtools to change different settings in the uboot environment. uboot-envtools version 2013.01 introduced a filesystem lock "/var/lock/fw_printenv.lock" to guarantee mutually exclusive access to the uboot environment. But the path /var doesn't exist on the sysupgrade ramfs. An upgrade on these devices fails since r36033 ("[package] uboot-envtools: upgrade to version 2013.01.01") with following messages: Error opening lock file /var/lock/fw_printenv.lock failed to update U-Boot environment Creating the "/var/lock" path before running fw_setenv is therefore a requirement unless the locking functionality in fw_setenv is removed or replaced with optional locking. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38483
* ar71xx: fix WLAN 5 GHz LED init on dir-825-c1Gabor Juhos2013-10-201-2/+1
| | | | | | | | | | | | Fixes the 5 GHz LED. The same function has no effect on the 2.4 GHz LED at all, so we might as well remove it. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38482
* x86: fix condition in base-files.mkJo-Philipp Wich2013-10-181-1/+1
| | | | | | | | | | | | TARGET_x86_generic_Soekris48xx is not defined, CONFIG_TARGET_x86_generic_Soekris48xx is This changes makes it possible to override the network config for soekris net48xx and net45xx targets. Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 38450
* imx6: reorganize build systemLuka Perkov2013-10-186-34/+160
| | | | | | | | | | | | Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
* build: drop FIT option until we actually need itLuka Perkov2013-10-172-4/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38439
* x86: Update kernel for alix2 to 3.10.15Felix Fietkau2013-10-171-1/+1
| | | | | | | | | | Without this patch, the patch target/linux/generic/patches-3.10/770-bgmac-backport.patch would not apply. Signed-off-by: Tobias Steinicke <tsteinicke@net.t-labs.tu-berlin.de> SVN-Revision: 38438
* imx6: fix file names when building imagesLuka Perkov2013-10-171-3/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38434
* imx6: enable FIT imagesLuka Perkov2013-10-161-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38432
* build: add menuconfig option for building FIT imagesLuka Perkov2013-10-161-0/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38431
* build: move mkits.sh script to more common placeLuka Perkov2013-10-162-123/+15
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38430
* imx6: enable fixed voltage reulatorLuka Perkov2013-10-161-0/+1
| | | | | | | | | | Fixed voltage regulator support is required by several drivers that have regulator consumers, such as the sgtl5000 audio codec used on many i.MX6 boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38426
* imx6: add support for gw52xxLuka Perkov2013-10-162-0/+429
| | | | | | | | | | | | | | | | | | | | | The Gateworks GW51xx family of products is based on the Freescale i.MX6DL SoC and offers a small form-factor with peripherals such as: * i.MX6DL 512MB DDR3 * 256MB NAND FLASH * 2x PCIe * 1x USB EHCI (to PCIe socket2) * 1x USB OTG (to front panel or PCIe socket1) * 1x uSD * LVDS * HDMI AudioVideo out * Analog Video in * Digital IO * Gateworks System Controller Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38425
* imx6: dts: update ventana dtsLuka Perkov2013-10-163-154/+374
| | | | | | | | | | | | | | | | | - fix spi chipselect for GW5400-A - fix audmux pinctrl for GW54xx - remove unused alias nodes - remove unused regulator nodes (will be adding pmic nodes next) - remove duplicate eeprom entries - add regulator definitions - fix sgtl5000 regulator reference - add egalax touchscreen controller interrupt - fix gw5400-a audmux pinctrl - fix usb ehci alias Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38424
* imx6: split out ventana init patch from devicetreeLuka Perkov2013-10-162-59/+70
| | | | SVN-Revision: 38423
* imx6: add pfuze100 regulator supportLuka Perkov2013-10-163-0/+543
| | | | | | | | | | - backport driver - apply patch to allow misprogrammed parts - enable driver in kernel Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38422
* imx6: minor (cosmetic) changes in uci-defaultsLuka Perkov2013-10-161-5/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38421
* imx6: add back bootargsLuka Perkov2013-10-162-0/+8
| | | | | | | | They make our life easier when testing ramdisk images. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38420
* ralink: fix default vlan mapping for MT7620a_MT7610eJohn Crispin2013-10-151-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38418
* mpc85xx: revert the napi polling code to the one from an older kernel ↵Felix Fietkau2013-10-151-0/+162
| | | | | | | | version to fix stability issues (#14020) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38409
* imx23: build DCP crypto co-processor support by defaultZoltan Herpai2013-10-141-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38408
* mxs: add support for I2SE Duckbill devicesZoltan Herpai2013-10-144-1/+197
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38407
* mxs: improve image generation supportZoltan Herpai2013-10-141-1/+24
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38406
* mxs: enable device tree support in /procZoltan Herpai2013-10-141-0/+1
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38405
* kirkwood: drop 3.3.x kernel versionLuka Perkov2013-10-149-1238/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38404
* kirkwood: upgrade to 3.10.15Luka Perkov2013-10-147-56/+128
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38402
* imx23: rename imx23 to mxs for upcoming imx23/28 supportZoltan Herpai2013-10-1411-20/+20
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38394
generated by cgit v1.1 at 2024-12-29 11:43:21 +0000