summaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx/mikrotik: disable unused MTD optionsGabor Juhos2013-12-161-0/+8
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
* ar71xx: add dummy rle_decode function if CONFIG_RLE_DECOMPRESS is not setGabor Juhos2013-12-161-1/+11
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39079
* ar71xx: add userspace support for WD My Net N750Gabor Juhos2013-12-165-3/+19
| | | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> [juhosg: remove the image generation part until the ethernet switch issue is resolved] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39078
* ar71xx: add kernel support for WD My Net N750Gabor Juhos2013-12-163-0/+236
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> [juhosg: use a separate patch for kernel changes] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39077
* generic: ar8216: Enable jumbo frames on AR8327 by defaultGabor Juhos2013-12-151-2/+2
| | | | | | | | | | This patch enables jumbo frames on AR8327 switch by default. I have tested it on TP-Link TL-WDR3600. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39076
* ar71xx: build image for the TP-Link TL-WA901ND v3 boardGabor Juhos2013-12-151-1/+2
| | | | | | | | Based-on: http://patchwork.openwrt.org/patch/4507/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39075
* ar71xx: add user-space support for the TP-Link TL-WA901ND v3 boardGabor Juhos2013-12-155-1/+8
| | | | | | | | Based-on: http://patchwork.openwrt.org/patch/4508/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39074
* ar71xx: add kernel support for the TL-WA901ND v3 boardGabor Juhos2013-12-152-1/+26
| | | | | | | | Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39073
* ar71xx: move TL-WA801ND v2 setup codeGabor Juhos2013-12-152-47/+47
| | | | | | | | | | | | The TL-WA801ND v2 board has only one LAN port which makes it more similar to the TL-WR[78]50RE devices. Move the board setup code into the mach-tl-wax50re.c file. Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39072
* ar71xx: refactor TL-WAx50RE setup codeGabor Juhos2013-12-151-4/+8
| | | | | | | | | | | This way it is a bit easier to add other TP-LINK devices based on the Atheros AP123 reference board with one LAN port. Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39071
* ar71xx: build firmware image for the TL-WA801ND v2Gabor Juhos2013-12-151-1/+2
| | | | | | | | | | | Patch to add the profile for the TP-LINK WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4502/ [juhosg: change subject] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39065
* ar71xx: add user space support for the TL-WA801ND v2Gabor Juhos2013-12-155-0/+11
| | | | | | | | | | Patch to add the user space support for the TL-WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4501/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39064
* ar71xx: add kernel support for the TL-WA801ND v2 boardGabor Juhos2013-12-152-8/+56
| | | | | | | | | | | | | | Patch to add kernel support for the TP-LINK WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4500/ [juhosg: - the TL-WA801ND v2 does not have a sliding switch, it uses a push button for WPS instead. Use the tl_mr3420v2_gpio_keys array to reflect that, - rename kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39063
* brcm47xx: deactivate early printk supportHauke Mehrtens2013-12-154-52/+4
| | | | | | | | | This breaks some devices where the serial console is not at port 0 but somewhere else. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39060
* kernel: update kernel 3.10 to 3.10.24Hauke Mehrtens2013-12-1536-134/+54
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39059
* upgrade 3.12 targets to 3.12.5Imre Kaloz2013-12-1414-78/+66
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39055
* drop the bootscript, new u-boots won't need itImre Kaloz2013-12-142-4/+0
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39051
* ralink: add mt7621 supportJohn Crispin2013-12-1320-1/+7513
| | | | | | | | there are still various missing pieces for full support. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39040
* add a default profile fileImre Kaloz2013-12-121-0/+16
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39037
* imx6: add canbus support for Ventana boardsLuka Perkov2013-12-114-0/+12
| | | | | | | | GW5400, GW5300, and GW5200 have CAN bus option. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39034
* imx6: add flexcan supportLuka Perkov2013-12-113-0/+154
| | | | | | | | | | | | | | backport upstream changes to 3.10: - 0060-flexcan.patch: - add flexcan pinctrl and devicetree config - 0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch - fix a clock issue - 0062-ARM-i.MX6q-fix-the-wrong-parent-of-can_root-clock.patch - fix a clock issue Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39033
* ralink: add TSOJohn Crispin2013-12-091-62/+205
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39019
* ralink: fix typo in gpio irq handlingJohn Crispin2013-12-091-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39018
* ralink: add mt7620a gdma info to dtsiJohn Crispin2013-12-091-1/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39017
* ralink: add asoc modulesJohn Crispin2013-12-091-0/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39016
* ralink: add partially working asoc driver. codec is not fully functional yetJohn Crispin2013-12-091-0/+727
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39015
* ralink: add helper that identifies the mt7620 ECOJohn Crispin2013-12-091-0/+14
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39014
* ralink: add dma engine supportJohn Crispin2013-12-091-0/+670
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39013
* imx6: add support for GW53xxLuka Perkov2013-12-093-0/+410
| | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks GW53xx family of products is based on the Freescale i.MX6DL SoC and offers a small form-factor with peripherals such as: * i.MX6DL * NAND FLASH * 4x PCIe * 4x USB EHCI (1x front-panel; 3x PCIe sockets) * 1x USB OTG * 1x uSD * LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch) * HDMI Audio/Video out * Analog Video in * Digital IO * Gateworks System Controller * Accelerometer * Canbus * Optional GPS * Industrial temp (-40C to +85C) * DC input voltage 8 to 42V (Passive PoE and 802.3af) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39012
* imx6: add DMA/SDMA support for 3.12Luka Perkov2013-12-091-4/+2
| | | | | | | | | DMA and SDMA support are needed for ssi based audio. Note that the sdma firmware is no longer required for ssi audio. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39011
* imx6: drop upstreamed patchLuka Perkov2013-12-091-32/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39010
* kernel: added defines for 3.12Luka Perkov2013-12-091-0/+5
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39009
* ath9k: merge initval and tx gain table updates, calibration fixesFelix Fietkau2013-12-082-0/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 39001
* generic: workaround arptables arpt_arp structure padding issue (#14577)Jo-Philipp Wich2013-12-061-0/+16
| | | | | | | | | | | | | | | | | | | Linaro GCC 4.6-2013.05 incorrectly pads the arpt_arp structure on at least the ar71xx target, resulting in a two bytes shorter struct in the kernel compared to what arptables userspace expects. When comparing sizeof(struct arpt_arp) in kernel and userspace, the former yields 162 byte, while the latter is 164 byte. As a consequence, the subsequent target_offset and next_offset members of the parent arpt_entry structure contain invalid values when processed by the arptables binary, leading to bad memory accesses in the populate_cache() procedure, subsequently causing a segfault. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 38999
* generic: fix occasional "execvp: /bin/sh: Argument list too long" is kernel ↵Jo-Philipp Wich2013-12-061-0/+44
| | | | | | | | header install phase (#12907) Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 38998
* brcm47xx: misc cleanupsHauke Mehrtens2013-12-012-4/+2
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38980
* brcm47xx: deactivate mips wait instruction only for BCM4706Hauke Mehrtens2013-12-013-13/+27
| | | | | | | | | The wait instruction is only broken on the BCM4706 and not on the other similar SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38979
* brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSEHauke Mehrtens2013-12-011-4/+0
| | | | | | | | | This sets both values to the OpenWrt default values. There is no reason to use some brcm47xx specific values here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38978
* brcm47xx: add vectored interruptsHauke Mehrtens2013-12-012-0/+67
| | | | | | | | | This adds support for vectored interrupts in this SoC. This is supported by the 74K cpus. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38975
* brcm47xx: add cpu overwritesHauke Mehrtens2013-12-012-14/+102
| | | | | | | | | | | | bcm47xx misses cpu overwrites for the features of the CPUs used in these SoCs. Instead of manually checking, it is now known at compile time for some options and the compiler is able to remove the checks and optimize the code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38974
* brcm47xx: use "firmware" partition nameHauke Mehrtens2013-12-013-22/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some time ago, after switching to the mainline bcm47xxpart driver following patch has been applied: commit 03cef8725d2062335ffc3de50fc037b294fd458c Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Sat Apr 6 22:22:26 2013 +0000 brcm47xx: use old partition names again for kernel 3.8 This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. I propose to revert this change and make sysupgrade use "firmware" instead. This makes brcm47xx compatible with widely used ar71xx and after all "firmware" sounds like a much better name for... the firmware. This change doesn't affect "sysupgrade" usage, because it never takes a partition name as a parameter. This change only affects users using mtd tool directly. Hopefully there are not many howtos using "mtd" command. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 38973
* kernel: update 3.10 to 3.10.21Gabor Juhos2013-12-0132-166/+110
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38972
* ar71xx: merge board specific patches into oneLuka Perkov2013-11-3017-539/+165
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38971
* kernel: refresh kernel configs with kconfig.plGabor Juhos2013-11-303-10/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38970
* ar71xx: update Userspace support for the WA850/WA750Gabor Juhos2013-11-301-0/+12
| | | | | | | Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38969
* ar71xx: Update profile for the wa750/wa850 to include rssileds by defaultGabor Juhos2013-11-301-2/+2
| | | | | | | Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38968
* ar71xx: use cybertan_check_image for image verification on the WRT160NLGabor Juhos2013-11-301-8/+2
| | | | | | | | | That function provides a slightly improved sanity check than the currently used solution. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38967
* ar71xx: sysupgrade for My Net Wi-Fi Range ExtenderGabor Juhos2013-11-302-0/+30
| | | | | | | | | | | | | | | | | | | | This patch enables the convenient sysupgrade feature for WD's Wi-Fi Range Extender. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4341/ [juhosg: - rename 'mynet_rext_check_image' function to 'cybertan_check_image' and move that into platform.sh, - remove the the model specific 'platform_do_upgrade_mynet_rext' function, - drop the mynet-rext.sh script, - remove the image/Makefile change, - update commit message] [christian: - check all 8 bytes of the firmware/device magic] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38966
* ar71xx: image: unify CyberTAN macrosGabor Juhos2013-11-301-13/+8
| | | | | | | | | | | | Make the Image/Build/CyberTAN macro more generic, and use simple wrappers for the GZIP/LZMA variants. This simplifies the Makefile a bit, and allows to build sysupgrade images for the devices which are using LZMA compressed uImages. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38965
* ar71xx: image: fix CyberTAN sysupgrade imagesGabor Juhos2013-11-301-1/+5
| | | | | | | | | | | | | | | | | In the current sysupgrade images, the CRC32 value of the TRX header covers the whole rootfs data. Due to this, the CRC value should be changed during sysupgrade otherwise the bootloader refuses to load the image on the next boot. Change the image generation to create sysupgrade images where the CRC32 value covers the kernel data only. This allows to skip the 'fixtrx' step during sysupgrade on the target. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38964
generated by cgit v1.1 at 2024-12-29 12:02:53 +0000