summaryrefslogtreecommitdiff
path: root/target
Commit message (Expand)AuthorAgeFilesLines
...
* Support booting the Speedport W502V using BRN-BOOT.John Crispin2012-02-143-7/+158
* ramips: extract eeprom for the PCIe wlan module on the RT-N56UGabor Juhos2012-02-141-4/+12
* ramips: rt3883: enable PCI on the RT-N56U boardGabor Juhos2012-02-141-0/+16
* ramips: rt3883: add PCI supportGabor Juhos2012-02-148-1/+548
* ramips: rt3883: sync 2.6.39 configGabor Juhos2012-02-141-7/+3
* ramips: use SoC specific irq.hGabor Juhos2012-02-143-3/+36
* fixes irq locking in ethernet driverJohn Crispin2012-02-141-0/+71
* fixes gpio_export patchJohn Crispin2012-02-141-8/+8
* add annex selection support to ltq_dsl packageJohn Crispin2012-02-142-5/+27
* ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boardsGabor Juhos2012-02-132-0/+17
* ar71xx: add model detection for TL-WR842N/NDGabor Juhos2012-02-131-0/+3
* update to 3.2Florian Fainelli2012-02-131-1/+1
* fix titan gpio register sizeFlorian Fainelli2012-02-131-0/+33
* ramips: rt3883: update package list in the default profileGabor Juhos2012-02-131-1/+1
* ramips: add preliminary support for the Asus RT-N56U boardGabor Juhos2012-02-1311-0/+174
* ramips: raeth: enable MDIO code for RT3883Gabor Juhos2012-02-131-2/+2
* ramips: add preliminary support for the RT3662/RT3883 SoCsGabor Juhos2012-02-1340-9/+2286
* add support for 3.2Florian Fainelli2012-02-131-0/+14
* brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.Hauke Mehrtens2012-02-122-2/+0
* brcm47xx: activate config bug to show warningsHauke Mehrtens2012-02-122-2/+0
* ramips: use GENERIC_{4,8}M image template for WR5123GNGabor Juhos2012-02-121-5/+2
* ramips: rt305x: pass MTD partition map to the ALL0256N via cmdlineGabor Juhos2012-02-121-1/+2
* brcm47xx: refresh patchesHauke Mehrtens2012-02-128-31/+20
* brcm47xx: update usb driver for brcm47xx.Hauke Mehrtens2012-02-128-390/+280
* ramips: add initial support for 3.2Gabor Juhos2012-02-1213-1/+607
* ramips: include 'linux/module.h' in the ramips_spi driverGabor Juhos2012-02-121-0/+1
* ramips: rt288x: remove per-board physmap_flash_data instancesGabor Juhos2012-02-126-28/+30
* ramips: rt305x: remove per-board physmap_flash_data instancesGabor Juhos2012-02-1221-120/+93
* enable another l2 cache errate on newer kernelsImre Kaloz2012-02-121-0/+1
* ramips: load gpio-polled keys moduleGabor Juhos2012-02-111-1/+1
* ramips: remove yet another CONFIG_MTD_PARTITION ifdefGabor Juhos2012-02-111-2/+0
* ramips: use gpio-keys-polled instead of gpio-buttonsGabor Juhos2012-02-1127-138/+159
* add some missing symbolsImre Kaloz2012-02-111-0/+3
* ramips: add MIPS platform fileGabor Juhos2012-02-112-29/+29
* generic/2.6.39: refresh patchesGabor Juhos2012-02-119-10/+10
* refresh patches to -rc3Imre Kaloz2012-02-116-6/+6
* ramips: add MDIO bus support for RT288XGabor Juhos2012-02-112-2/+154
* rename 3.1 patches directory as it will be used for newer kernels as wellImre Kaloz2012-02-1114-0/+0
* rename 2.6.39 patches directoryImre Kaloz2012-02-1115-0/+0
* ramips: fix Belkin F5D8235-v2 VLAN setupGabor Juhos2012-02-111-4/+10
* ramips: raeth: make debugging messages configurableGabor Juhos2012-02-114-4/+16
* ramips: raeth: use device pointer in DMA API callsGabor Juhos2012-02-111-11/+12
* ramips: raeth: add netdev pointer to private structureGabor Juhos2012-02-112-0/+2
* ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmitGabor Juhos2012-02-111-5/+4
* ramips: raeth: unmap rx DMA address in ramips_cleanup_dmaGabor Juhos2012-02-111-1/+4
* ramips: raeth: add rx_dma array to store the DMA address of the rx packetsGabor Juhos2012-02-112-10/+17
* ramips: raeth: use dma_addr_t for the descriptorsGabor Juhos2012-02-112-9/+10
* ramips: raeth: unmap DMA memory when a packet is receivedGabor Juhos2012-02-111-0/+4
* ramips: raeth: add a temporary pktlen variableGabor Juhos2012-02-111-3/+6
* ramips: raeth: protect macro parametersGabor Juhos2012-02-111-4/+4
generated by cgit v1.1 at 2024-12-21 10:53:42 +0000