summaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ramips: switch from 24kec to 24kcJonas Gorski2016-08-084-4/+4
| | | | | | | | Since the only difference between 24Kec and 24Kc is the addition of DSP ASE support, and we don't use it anymore, there is no need to keep 24Kec as a separate cpu type. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* Revert "kernel: remove long obsolete gpio spi controller driver patch"Felix Fietkau2016-08-047-3/+1125
| | | | This reverts commit 9e62a7668c4085563a907da51a08819c88d04f33.
* ar71xx: add missing LZO support select for routerboard devicesFelix Fietkau2016-08-041-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2Felix Fietkau2016-08-041-0/+17
| | | | | | | This provides a good tradeoff across at least 24Kc-74Kc, while also producing smaller code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: mark compression modules as hiddden to obsolete the compressor ↵Felix Fietkau2016-08-043-106/+0
| | | | | | kconfig hack Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: mark kmod-udptunnel as hiddden to replace the NET_UDP_TUNNEL kconfig ↵Felix Fietkau2016-08-043-33/+0
| | | | | | hack Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove unused morse led trigger driverFelix Fietkau2016-08-0414-479/+26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove long obsolete gpio spi controller driver patchFelix Fietkau2016-08-047-1125/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove a long obsolete unlzo decompressor fixFelix Fietkau2016-08-043-69/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove obsolete slab tuning patchFelix Fietkau2016-08-043-39/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove esfq qdiscFelix Fietkau2016-08-046-2379/+0
| | | | | | It has been obsolete for years now Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: clean up 260-crypto_test_dependencies.patch to get rid of some more ↵Felix Fietkau2016-08-033-10/+15
| | | | | | kernel bloat Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: enable nand support for mt7621John Crispin2016-08-031-1/+1
| | | | | | this makes sysupgrade work on the ERX Signed-off-by: John Crispin <john@phrozen.org>
* ramips: updated remaining profiles to the new image building codeJohn Crispin2016-08-0342-1322/+1001
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* x86: enable CPU frequency scalingLucian Cristian2016-08-034-5/+15
| | | | | | | | | CPU frequency scaling enables the operating system to scale the CPU frequency up or down in order to save power. CPU frequencies can be scaled automatically depending on the system load, in response to ACPI events, or manually by userspace programs. Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* lantiq: add cpu temperatur sensor driver for xrx200Florian Eckert2016-08-033-0/+171
| | | | Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
* build: remove MIPS dsp/dsp2 CPU_SUBTYPEFelix Fietkau2016-08-0310-10/+0
| | | | | | | There does not seem to be any meaningful difference in generated code. This will save some time and space on snapshot builds Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove useless minimal/ath5k profilesFelix Fietkau2016-08-022-34/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* omap: remove CONFIG_SND_DEBUG overrideFelix Fietkau2016-08-021-2/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing config symbolFelix Fietkau2016-08-021-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable missing ath10k firmware for BT Home Hub 5AFelix Fietkau2016-08-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add checksum targetJo-Philipp Wich2016-08-011-0/+6
| | | | | | | | | | | | | | | Add a new "checksum" make target which generates an sha256sums file over the image files produced in bin/targets/ and automatically call it during make world after the package index generation. The advantage of this new target is that it is guaranteed to run after the images, the SDK and the ImageBuilder archives have been generated to ensure that they all end up in the checksum file. Fixes FS#51. Uses sed to postprocess the OpenSSL digest output into an sha256sum command compatible format. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* apm821xx: fix IB image buildingJo-Philipp Wich2016-08-011-6/+10
| | | | | | | Change the image build code to generate the DTB files as part of the kernel build phase in order to fix the image build in the ImageBuilder environment. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: re-enable CONFIG_SND_VERBOSE_PROCFS (FS#66)Felix Fietkau2016-08-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Make wget2nand look for LEDE project firmware filesdiizzyy2016-07-261-2/+2
| | | | | | Make wget2nand aware of the new file names Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ipq806x: fix MAC_POWER_SEL for Netgear R7800dissent12016-07-261-1/+1
| | | | | | | Fixes instability/corruption on the ethernet interface connected to port0 on the switch on Netgear R7800 as well. Signed-off-by: Josh Bendavid <joshbendavid@gmail.com> Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ramips: Rename TP-Link Archer C50 LEDsP.Wassi2016-07-262-10/+10
| | | | | | | Rename LEDs in TP-Link Archer C50 from [manufacturer name] to [board name] ("tp-link" -> "c50") Signed-off-by: P.Wassi <p.wassi@gmx.at>
* ramips: Improve TP-Link Archer C20i supportP.Wassi2016-07-264-5/+49
| | | | | | Improve / finalise TP-Link Archer C20i support. Signed-off-by: P.Wassi <p.wassi@gmx.at>
* target/sdk: update README.SDK to explain dependency handlingFelix Fietkau2016-08-011-1/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target/sdk: ship toolchain and kernel module packageFelix Fietkau2016-08-011-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm63xx: fix CT-536p/CT-5621T supportDaniel Gonzalez2016-08-012-2/+2
| | | | | | | | | | | Fix support for the Comtrend CT-536+, CT-5361 and CT-5621T routers support. Currently the firmware is broken for these routers, because there is a missing bar in the code at the DTS file avoiding to match with DTS stuff at the kernel. This causes the router boots without ethernet connectivity. The status led also has a typo. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* kernel: silence a false positive uninitialized variable warningFelix Fietkau2016-08-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: fix boot hang if cmdline contains words with r in the middleJonas Gorski2016-08-011-1/+1
| | | | | | | | | | | | | | The ATB DTB mangle code will enter an infinite loop if it encounters a word in the command line that contains an r in the middle of the word. Fix this by increasing ptr everytime before invoking strchr, ot avoid finding the same r again. This fixes booting at least on Netgear R7500v1, which contains "ubi.mtd=rootfs" in its commandline, triggering the misbehaviour. Fixes: 0ddcbee26151 ("ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mvebu: fix NAND flash issues (FS#67)Felix Fietkau2016-07-312-36/+69
| | | | | | | | Remove the previous PIO delay patch and add a revert patch for a faulty upstream commit, which seems to have introduced this issue in the first place Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: clean up / fix ventana image build codeFelix Fietkau2016-07-311-69/+43
| | | | | | | | | Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: use ubinize-image.sh to fix build with per-device rootfsFelix Fietkau2016-07-313-64/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm63xx: fix build with per-device rootfsFelix Fietkau2016-07-311-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: add missing sysupgrade-nand => sysupgrade-tar changeFelix Fietkau2016-07-311-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sdk: provide a config symbol for detecting builds within the SDKFelix Fietkau2016-07-311-0/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-3112-43/+43
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove hostap driverFelix Fietkau2016-07-314-463/+1
| | | | | | | It has been marked as broken for well over a month now and nobody has complained. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: increase block2mtd rootfs probe timeout on ERFelix Fietkau2016-07-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: pad squashfs sysupgrade image rootfsFelix Fietkau2016-07-301-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: drop unsupported jffs2 feature flagFelix Fietkau2016-07-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: fix sysupgrade imagesFelix Fietkau2016-07-301-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix crashlog regression on x86Felix Fietkau2016-07-301-20/+32
| | | | | | | | Check memblock regions for sufficient size before attempting to use them. Allow checks for multiple memblock regions until a suitable one is found. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath25: rework image buildingJo-Philipp Wich2016-07-291-41/+27
| | | | | | | | * Remove legacy macros * Emit generic LZMA and Gzip kernel images from the combined device recipe * Rename combined device to generic Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-299-11/+11
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* octeon: clean up image build codeJo-Philipp Wich2016-07-291-13/+2
| | | | | | | Use the generic "sysupgrade-nand" build step to pack the sysupgrade file, it performs the same steps as the inline "tar-file" macro. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: remove obsolete variables from opkg commandFelix Fietkau2016-07-291-3/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.1 at 2024-07-06 21:47:58 +0000