summaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: mvswitch: merge 3.10+ compile fix into the codeJonas Gorski2015-12-045-143/+3
| | | | | | | | | The lowest we support is 3.18, so no need to keep it as a separate patch. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47749
* kernel: drop unneeded modification of mtd_add_partition functionRafał Miłecki2015-12-046-54/+20
| | | | | | | | | | | | In old days mtd_add_partition was checking for partitions overlapping which was breaking our splitting feature. We had to modify this function by adding an extra bool dup_check parameter. Upstream commit: 3a434f66e6da ("mtd: part: Remove partition overlap checks") removed that check so we don't need our modification anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47748
* kernel: drop old uimage splitter from 4.4Rafał Miłecki2015-12-042-71/+1
| | | | | | | | | | | For a long time we have a dedicated firmware splitter for uimage as a replacement for the one builtin into mtd subsystem. For a year we got a proper warning for users sticking to the old one (r43700). It should be really safe to drop it now, especially since we do it for 4.4 only. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47747
* malta: board.d: fix typoJo-Philipp Wich2015-12-041-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47746
* kirkwood: add missing board_config_flush(), remove dead codeJo-Philipp Wich2015-12-031-20/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47745
* all: remove dummy ucidef_set_interface_loopback() from board.dJo-Philipp Wich2015-12-037-14/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47744
* arc770: switch from uci-defaults to board.dJo-Philipp Wich2015-12-033-23/+32
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47743
* mxs: convert from uci-defaults to board.dJo-Philipp Wich2015-12-033-23/+32
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47742
* malta: switch from uci-defaults to board.dJo-Philipp Wich2015-12-032-2/+20
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47741
* at91: switch from uci-defaults to board.dJo-Philipp Wich2015-12-032-8/+17
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47740
* realview: switch from uci-defaults to board.dJo-Philipp Wich2015-12-033-6/+20
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47739
* imx6: switch from uci-defaults to board.dJo-Philipp Wich2015-12-032-8/+17
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47738
* netlogic: fix typo, copyright in board.d scriptJo-Philipp Wich2015-12-031-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47737
* netlogic: switch from uci-defaults to board.dJo-Philipp Wich2015-12-032-7/+16
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47736
* kirkwood, ipq806x: fix board.d script permissionsJo-Philipp Wich2015-12-036-0/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47735
* octeon: switch from uci-defaults to board.dJo-Philipp Wich2015-12-033-31/+38
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47734
* kirkwood: switch from uci-defaults to board.dJo-Philipp Wich2015-12-033-20/+33
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47733
* ipq806x: switch from uci-defaults to board.dJo-Philipp Wich2015-12-034-42/+52
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47730
* ar71xx: board.d: add missing include (#21296)Jo-Philipp Wich2015-12-031-0/+1
| | | | | | | | | Include /lib/functions/system.sh in 02_network to define missing mtd_get_mac_binary() procedure. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47723
* board.d: remove redundant ucidef_set_interfaces_lan_wan() callsJo-Philipp Wich2015-12-034-42/+0
| | | | | | | | | | This removes calls to ucidef_set_interfaces_lan_wan() and ucidef_set_interfaces_lan() on boards where all relevant info can be inferred from the switch definition. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47722
* board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()Jo-Philipp Wich2015-12-035-137/+71
| | | | | | | | | | | | This changes uci-defaults-new.sh, config_generate and all relevant board.d files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into a single function. Also removes now superfluous enable and reset arguments. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47721
* base-files: uci-defaults-new: remove reset/enable args of ucidef_add_switch()Jo-Philipp Wich2015-12-032-3/+6
| | | | | | | | | | | | | | | Out of 69 switch definitions, only 3 pass something different than "1" as values for reset and enable, with one of those three being invalid. This change ... * removes the reset and enable arguments from ucidef_add_switch() * unconditionally writes reset:1 and enable:1 to JSON * converts the three users of nonstandard values to ucidef_add_switch_attr() Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47720
* ramips: switch ucidef_add_switch_vlan() to ucidef_add_switch_ports()Jo-Philipp Wich2015-12-031-38/+41
| | | | | | | | | | This migrates the final board.d user of ucidef_add_switch_vlan() to the new ucidef_add_switch_ports() approach, fixing some logic errors for a few boards along the way. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47717
* kernel: backport support for m25p80 compatible="jedec,spi-nor" in DTFelix Fietkau2015-12-031-0/+39
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47716
* kernel: add overlayfs stacking fix from upstreamFelix Fietkau2015-12-031-0/+33
| | | | | | | | | | | Overlayfs stacking was broken in 4.1.12 but now fixed in upstream branch. Stacking allows experimenting with configurations without the need to reset a device to factory config. Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47714
* bcm53xx: move BCM5301X patches to use 08x prefixRafał Miłecki2015-12-032-0/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47713
* bcm53xx: use backported versiions or R8000 & dt-bindings patchesRafał Miłecki2015-12-032-6/+11
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47711
* bcm53xx: fix typo in BCM5310X (patch name and subject)Rafał Miłecki2015-12-031-1/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47710
* bcm53xx: move & update accepted USB patch for GPIO controlRafał Miłecki2015-12-031-5/+7
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47709
* bcm53xx: use backported BCM5301X patches from stblinux devicetree/nextRafał Miłecki2015-12-032-16/+38
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47708
* bcm53xx: use backported BCM5301X patches from stblinux soc/nextRafał Miłecki2015-12-032-0/+68
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47707
* bcm53xx: set vcc-gpio properties in one patchRafał Miłecki2015-12-032-35/+20
| | | | | | | | No reason to handle Buffalo WXR-1900DHP in separated patch. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47706
* bcm53xx: drop fixed clock from DTS for Buffalo WXR-1900DHPRafał Miłecki2015-12-033-9/+3
| | | | | | | | We don't use fixed clock in 4.4 (and 4.3) anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47705
* bcm53xx: update linux 4.4 configRafał Miłecki2015-12-031-1/+11
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47704
* bcm53xx: add linux 4.4 supportRafał Miłecki2015-12-0336-0/+4925
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47703
* brcm63xx: add linux 4.4 supportJonas Gorski2015-12-02158-0/+16159
| | | | | | | | Only netboot tested. Flash at your own risk. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47702
* kernel: add linux 4.4 supportJonas Gorski2015-12-02180-0/+30189
| | | | | | | | Based on 4.4-rc3. Runtime tested on MIPS. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47701
* brcm63xx: Add NuCom R5010UNv2 supportJonas Gorski2015-12-029-0/+163
| | | | | | | | | | | | | | | | | This patch adds support for the NuCom R5010UNv2. It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used for the profile of the router. It's worth mentioning this board was affected by a bug solved with https://dev.openwrt.org/changeset/46707 Tested-by: Angel Fontan <angel.fontan@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47697
* brcm63xx: drop 3.18 supportJonas Gorski2015-12-02166-16711/+0
| | | | | | | | Drop 3.18 support; it will live on in CC. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47696
* ipq806x: ap148/r7500: fix eth0 for non gige speedsJonas Gorski2015-12-024-8/+24
| | | | | | | | | | | | | | Eth0 is attached to mac0 of the switch with a fixed link and and not to phy4 in single phy mode, so configuring it to anything but 1000FD will break the connection, which will happen if a only 100 Mbit capapble device is plugged into the wan port. Fix this by not taking the state from phy4 and just configuring a fixed link for eth0. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47695
* kernel: update 4.1 to 4.1.13Hauke Mehrtens2015-12-0292-1199/+332
| | | | | | | | | | | - two upstreamed patches removed - compile tested all targets using 4.1 - run tested ar71xx Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47694
* bcm53xx: switch to ucidef_add_switch_ports()Jo-Philipp Wich2015-12-021-10/+10
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47692
* mpc85xx: fix up m25p80 device id (#21286)Felix Fietkau2015-12-021-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47691
* lantiq: fix up m25p80 device ids (#20975)Felix Fietkau2015-12-025-10/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47690
* bcm53xx: update PCIe driverHauke Mehrtens2015-12-0227-0/+4140
| | | | | | | | | This updates the iProc PCIe driver to the version currently submitted for kernel 4.5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47688
* bcm53xx: update SMP patchesHauke Mehrtens2015-12-028-420/+836
| | | | | | | | | Broadcom submitted new SMP patches for this SoC to upstream Linux, add them to OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47687
* bcm53xx: activate workarounds for erratasHauke Mehrtens2015-12-026-25/+80
| | | | | | | | | | | This also deactivates some workaround for erratas only seen in older CPU cores and L2 cores not used in this SoC. This partly reverts commit r44947. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47686
* bcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patchHauke Mehrtens2015-12-023-9/+2
| | | | | | | | | This patch is currently placed directly behind the SMP patches and has nothing to do with SMP, move it to an other position. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47685
* brcm47xx: add Netgear WN2500RP supportRafał Miłecki2015-12-023-10/+32
| | | | | | | | We generate V1 image only for now. We lack buttons support for V2. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47682
* mpc85xx: fix typo added in r47676Jo-Philipp Wich2015-12-011-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47681
generated by cgit v1.1 at 2024-11-06 16:22:55 +0000