summaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: use correct PLL configuration register bitmask for QCA956x SoC.Felix Fietkau2015-11-021-2/+2
| | | | | | | | | Incorrect value causes clock inaccuracy as huge as 1/60. Signed-off-by: Dmitry Ivanov <dima@ubnt.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47363
* mediatek: add support for the new MT7623 Arm SoCJohn Crispin2015-11-0284-0/+50668
| | | | | | | | | the support is still WIP. next steps are to make the pmic and ethernet work. this is the first commit to make sure nothing gets lost. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47354
* ramips: add support for ZBT WG2626John Crispin2015-11-027-3/+161
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47351
* ramips: add eeprom mtd partition to the Asus RP-N53 dtsJohn Crispin2015-11-021-0/+4
| | | | | | | | This patch adds the eeprom property to the dts for the Asus RP-N53. It is necessary to get the wifi in the soc working. Signed-off-by: Alberto Mattea <alberto@mattea.info> SVN-Revision: 47350
* ramips: preinit: use iproute2 instead of vconfigJohn Crispin2015-11-021-2/+2
| | | | | | | | | | | | | | | Replace use of vconfig with the corresponding iproute2 syntax in /lib/preinit/07_set_preinit_iface_ramips The switch reset work-around needed on some ramips targets used the deprecated vconfig tool to bring up the pre-init/failsafe interface. This doesn't work on recent builds where vconfig is no longer being deployed, resulting in the device being unreachable when triggered into failsafe mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47349
* ramips: add support for Dovado tiny ACJohn Crispin2015-11-028-0/+202
| | | | | | | | | | | | | | | | Add support for Dovado tiny AC wifi router. Soc: mt7620a ram: 64MB flash: 8MB 1x usb 2.0 two gigabit lan ports 5ghz wlan is not supported on this board since there is no gpl driverfor mt7610e wifi chip. Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> SVN-Revision: 47348
* ramips: add function to change rt2x00 wifi eeprom macJohn Crispin2015-11-021-0/+12
| | | | | | | | | Some boards like dovado tiny ac have generic ralink mac in onflash wifi eeprom. Add eeprom_set_macaddr function to rt2x00 eeprom extract script which changes mac addr insde eeprom dump. Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> SVN-Revision: 47347
* ramips: mt7620 add icplus phy driver kernel config symbolJohn Crispin2015-11-021-0/+1
| | | | | | | | | Add missing icplus phy driver kernel config symbol to mt7620 subtarget. This is needed since some mt7620 devices have icplus ip1001 ethernet transceiver Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> SVN-Revision: 47346
* ramips: add support for the Asus RP-N53 in the "02_network" boot scriptJohn Crispin2015-11-021-1/+2
| | | | | | | | This patch adds a case for the Asus RP-N53 in the "02_network" boot script. Without this, the lan interface does not get configured on startup, effectively bricking the device. Signed-off-by: Alberto Mattea <alberto@mattea.info> SVN-Revision: 47345
* ar71xx: Add support for wdr7500v3John Crispin2015-11-021-1/+8
| | | | | | | | | | The device is similar to Archer C7 v2, but with 8M of flash, and 6 external antennas. Reason for breaking the naming pattern is that sticker on the back mentions "WDR7500" and has no mention of "Archer". Signed-off-by: Srdjan Rosic <rosic@google.com> SVN-Revision: 47344
* omap/Beagleboard: remove FEATURES overrideJohn Crispin2015-11-021-1/+0
| | | | | | | | It overrides the feature list of the whole target. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47343
* ramips: rt305x: enable seama mtdsplit parserJohn Crispin2015-11-021-0/+1
| | | | | | | | | D-Link DIR-610 A1 needs seama mtdsplit parser. This patch should fix #18046. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 47341
* ramips: rt305x: update kernel config symbolsJohn Crispin2015-11-021-3/+4
| | | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 47340
* package/devel/perf: fix build for kernel 4.1John Crispin2015-11-021-0/+67
| | | | | | | | | | This fix contains 2 parts: - kernel 4.1: backport upstream patch "perf build: Do not fail on missing Build file" - add NO_LZMA=1 to perf MAKE_FLAGS to disable LZMA support Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 47338
* bcm53xx: Netgear R8000: define GPIO powering USB portsRafał Miłecki2015-11-016-16/+62
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47337
* bcm53xx: replace USB patch fixing power control with the most recent versionRafał Miłecki2015-11-0110-146/+204
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47336
* kernel: update kernel 3.18 to version 3.18.23Hauke Mehrtens2015-11-0133-203/+142
| | | | | | | | | | Changelog: * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47334
* ar71xx: fix regression in building TL-WDR6500-v2 imagesFelix Fietkau2015-11-011-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47333
* imx6: add v4.1 supportFelix Fietkau2015-11-019-0/+2246
| | | | | | | | | | | | | Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47331
* kirkwood: add initial support for NSA310sLuka Perkov2015-11-015-0/+324
| | | | | | | Signed-off-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47330
* generic: 3.18: refresh patchesLuka Perkov2015-11-012-22/+15
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47329
* malta: make eth0 the wan interface by defaultFelix Fietkau2015-10-311-1/+4
| | | | | | | | | | | | Many packages for OpenWrt currently assume that lan is the "internal" side of the network map, e.g. if installed, dnsmasq will hand out DHCP leases on lan, firewall will allow forwarding on lan. While at it, also configure a lan interface if eth1 exists. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 47326
* malta: use as a default type deviceFelix Fietkau2015-10-311-2/+0
| | | | | | | | | | | | | | There is currently no relevant definition for developerboard device type in include/target.mk, thus packages like iptables, firewall, dnsmasq etc. are missing in the default images, rendering it almost useless for regular testing or normal use. With this change, currently a default set of packages for "router" will be installed to malta firmware images. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 47325
* malta: set CPU_TYPE:=24kc.Felix Fietkau2015-10-311-0/+1
| | | | | | | | | | | | | | | | | There are instructions (e.g. wsbh) only available in MIPS32R2 which is the isa level used by many MIPS targets in OpenWrt. As we use the malta target mostly for development and testing purposes, setting the CPU_TYPE to 24Kc will make the emulation more real. The following is output from qemu-system-mipsel 2.3.0 root@OpenWrt:/# cat /proc/cpuinfo | grep 'cpu model\|isa' cpu model : MIPS 24Kc V0.0 FPU V0.0 isa : mips1 mips2 mips32r1 mips32r2 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 47324
* generic: fix unrecognized opcode wsbh when building for MIPS16.Felix Fietkau2015-10-313-0/+174
| | | | | | | | | | | | | | | | | | | The issue was found and reported by hynman [1] when compiling reaver for ar71xx (Big Endian MIPS). {standard input}: Assembler messages: {standard input}:79: Error: unrecognized opcode `wsbh $2,$2' {standard input}:90: Error: unrecognized opcode `wsbh $3,$17' {standard input}:208: Error: unrecognized opcode `wsbh $2,$2' make[3]: *** [builder.o] Error 1 The patch was already in upstream since kernel release 4.3-rc5. [1] https://github.com/openwrt/packages/commit/1e29676a8ac74f797f8ca799364681cec575ae6f#commitcomment-12901931 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 47322
* ar71xx/image: remove old unused build code for TPLINKFelix Fietkau2015-10-311-33/+0
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47321
* ar71xx/image: remove old unused build code for TPLINKOLDFelix Fietkau2015-10-311-32/+0
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47320
* ar71xx/image: migrate tl-wr841nd-v1.5 to new build step using squashfs+jffs2 ↵Felix Fietkau2015-10-311-4/+9
| | | | | | | | | | | instead of squashfs-only All other tplink images use squashfs+jffs2. I don't see any reason why this board should use squashfs-only Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47319
* ar71xx/image: remove old unused build step TPLINK-64KFelix Fietkau2015-10-311-33/+0
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47318
* ar71xx/image: migrate tl-wdr6500-v2 to new image build stepsFelix Fietkau2015-10-311-2/+9
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47317
* ar71xx/image: refactor templates tplink-chn-v2Felix Fietkau2015-10-311-14/+2
| | | | SVN-Revision: 47316
* ar71xx/image: introduce TPLINK_HEADER_VERSION variable for tplink imageFelix Fietkau2015-10-311-3/+7
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47315
* oxnas: image: Remove custom mkfs targz override as base should be fine nowFelix Fietkau2015-10-311-5/+0
| | | | | | | | | It was wrong anyway, missing file sort order parameter which was fixed in base month ago. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47314
* kirkwood: image: Remove custom mkfs targz override as base should be fine nowFelix Fietkau2015-10-311-5/+0
| | | | | | | | | It was wrong anyway, missing file sort order parameter which was fixed in base month ago. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47313
* imx6: image: Remove custom mkfs targz override as base should be fine nowFelix Fietkau2015-10-311-5/+0
| | | | | | | | | It was wrong anyway, missing file sort order parameter which was fixed in base month ago. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47312
* oxnas: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variableFelix Fietkau2015-10-311-12/+8
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47310
* kirkwood: image: Refactor sanitize_profile_name using PROFILE_SANITIZED varFelix Fietkau2015-10-311-18/+14
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47309
* imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variableFelix Fietkau2015-10-311-13/+9
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47308
* ramips: fix for kernel 4.0 napi repoll need return budgets numberFelix Fietkau2015-10-301-1/+4
| | | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47306
* x86/generic: enable radeon drm driverFelix Fietkau2015-10-301-1/+4
| | | | | | | | This enables modesetting for radeon based boards. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 47305
* x86/generic: enable pata_atiixp driverFelix Fietkau2015-10-301-0/+1
| | | | | | | | | | This enables booting from devices that use an ATI PATA controller for the boot device, such as the embedded CF cards in Fujitsu-Siemens Futro thin-clients. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 47304
* x86/generic: refresh subtarget kernel configFelix Fietkau2015-10-301-6/+2
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 47303
* kernel: add some missing symbols for 4.3Felix Fietkau2015-10-301-0/+11
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47302
* realview: Create ext4 image by defaultFelix Fietkau2015-10-301-1/+1
| | | | | | | | | Following the additions in r46924, enable the 'ext4' feature for realview target so the ext4 image is created by default. Signed-off-by: Dov Murik <dov.murik@gmail.com> SVN-Revision: 47301
* kernel: backport some bcma header file definitions from wireless-testingFelix Fietkau2015-10-303-0/+78
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47284
* kernel: add missing config symbolFelix Fietkau2015-10-304-0/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47283
* bcm53xx: add missing Netgear R8000 LEDsRafał Miłecki2015-10-304-2/+116
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47282
* bcm53xx: add workaround for Netgear R8000 networkRafał Miłecki2015-10-303-2/+33
| | | | | | | | | | | | According to the info from NVRAM we should use port 8 for the CPU (and interface eth2). Unfortunately it doesn't work right now, so lets switch to the port 5. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Forwardport of r46586 from 15.05 SVN-Revision: 47281
* generic: fix adm6996 initJohn Crispin2015-10-261-0/+6
| | | | | | | | | | | | Kernel 3.14 added aditional genphy_soft_reset phy reset to phy_init_hw in drivers/net/phy/phy_device.c Since adm6996 does in driver soft reset and doesn't use BMCR_RESET for soft reset add dummy soft_reset callback to adm6996 driver, like it is done in ar8216. This fixes ticket #20147 Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> SVN-Revision: 47272
* kernel: Fix environment pointer setup in ar71xx/ath79John Crispin2015-10-261-3/+19
| | | | | | | | | | | | | | | Observed on ar71xx/ath79 platforms such as Ubiquiti RouterStations.Reported in #20642.: (https://dev.openwrt.org/ticket/20642). If embedded command-line text exists with CONFIG_IMAGE_CMDLINE_HACK=y,firmware init doesn't initialize environment pointer (fw_init_cmdline not called). arcs_cmdline is not initialized before calling strlcat. Signed-off-by: Ted Hess <thess@kitschensync.net> Tested-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 47270
generated by cgit v1.1 at 2024-07-06 19:52:16 +0000