summaryrefslogtreecommitdiff
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Add a tool to create JCG factory imagesJohn Crispin2016-03-041-209/+220
| | | | | | | | replace spaces with tabs Signed-off-by: Reinhard Max <reinhard@m4x.de> SVN-Revision: 48901
* ramips: Add a tool to create JCG factory imagesJohn Crispin2016-03-032-0/+393
| | | | | | | | | | This tool creates factory images for JCG routers. Details can be found in the header comment of jcgimage.c. Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48888
* firmware-utils: mkfwimage: fix firmware_max_length for XM layoutFelix Fietkau2016-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new u-boot version bundled with the 5.6.x firmwares from Ubiquiti gets confused by the smaller rootfs partition size; this can lead to various issues: 1. We've gotten reports that flashing from the 5.6.x stock firmware to OpenWrt will brick devices; I wasn't able to reproduce this myself 2. Flashing from 5.5.x stock firmware to OpenWrt and back to stock (via TFTP recovery), following by an update to 5.6.x via web interface can yield a bricked device with the following properties: - It can't be booted without entering commands over a serial console, as u-boot supplies the wrong MTD layout - The web interface won't accept any image with the original flash layout, so stock firmware upgrades are impossible - As the TFTP recovery doesn't update u-boot, returning to the old u-boot from firmware 5.5.x is impossible To recover from 2., creating an OpenWrt image which doesn't set u-boot as read-only and flashing a backup of the old u-boot from there is the only way known to me. (Fixing the mtdparts variable in u-boot-env from OpenWrt might also work; settings this from u-boot over serial didn't have any permanent effect.) Fix all of this by setting the correct flash layout also used by the stock firmware. Flashing has been tested from both firmware 5.5.x and 5.6.x. The fixed layout also matches the mtdparts defined by OpenWrt. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48829
* ar71xx, firmware-utils: split ubdev01 flash layout from XMFelix Fietkau2016-02-291-0/+6
| | | | | | | | | The ubdev01 profile defines its own MTDPARTS with smaller firmware partition, so give it its own UBNT_BOARD in mkfwimage. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48828
* firmware-utils: mkfwimage: add -Wall, fix obvious bugs causing compile warningsFelix Fietkau2016-02-292-8/+6
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48827
* ar71xx: Added support for TL-WA801NDv3John Crispin2016-02-121-1/+6
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 48705
* tools/gmp: update to 6.1.0John Crispin2016-02-081-3/+3
| | | | | | | | Update gmp to version 6.1.0, released in November 2015. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48660
* tools/cmake: update to 3.4.3John Crispin2016-02-081-2/+2
| | | | | | | | Update cmake to 3.4.3. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48659
* firmware-utils: add oseama tool for creating Seama entitiesRafał Miłecki2016-02-012-0/+423
| | | | | | | | | | | | | It has an important feature (compared to seama) of using multiple input files, aligning them and padding zeroes until reaching a specified absolute offset. This is needed for a proper flash layout on NAND. We want kernel partition to be big enough to handle future updates without a need to resize it and wipe whole "ubi" partition. It's important as we don't want to lose block counters. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48601
* tools/mkimage: backport SOURCE_DATE_EPOCH for reproducible buildsFelix Fietkau2016-01-284-12/+88
| | | | | | | | | | | | | | | | This pulls in Paul Kocialkowski's SOURCE_DATE_EPOCH support patch for u-boot, which landed upstream circa July 2015. Note that this "host" u-boot repo is only used to compile the 'mkimage' utility, and isn't used to actually compile a bootloader for any target. This patch could be removed if/when the host u-boot package is updated to a contemporary version (but there doesn't seem to be any motivation/need to do so). Signed-off-by: bryan newbold <bnewbold@robocracy.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix portability error, refresh patches] SVN-Revision: 48542
* flock: do not use ccache, fixes build errorFelix Fietkau2016-01-211-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48447
* tools: compile flock before everything elseFelix Fietkau2016-01-201-1/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48413
* lantiq: add support for TP-Link VR200vHauke Mehrtens2016-01-181-0/+12
| | | | | | | | | This adds basic support for TP-Link VR200v. Currently the following parts are not working: FXO, Voice, DECT, WIFI (both) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48328
* tools/cmake: update version to 3.4.1Felix Fietkau2016-01-101-4/+4
| | | | | | | | Update cmake version to 3.4.1, released in Dec 2015. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48188
* mac80211: move b43legacy firmware to a separate packageFelix Fietkau2016-01-101-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48184
* tools/e2fsprogs: remove outdated configure argsJohn Crispin2015-12-231-3/+0
| | | | | | | | | | | | removed upstream in 1.40.5: Don't build e2fsck statically by default anymore 7e8fe327b51051adcbb0d44169b1a933173ce1ff fixes: configure: WARNING: unrecognized options: --disable-shared, --enable-static, --enable-dynamic-e2fsck Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47978
* firmware-utils: allow mkfwimage2 to use - in partition namesJohn Crispin2015-12-231-1/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47975
* tools/squashfs4: refresh patchesFelix Fietkau2015-12-114-13/+9
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47869
* firmware-utils: fix various compiler warningsJohn Crispin2015-12-117-2/+8
| | | | | | | | | mostly implicit defines due to missing includes plus one const that shouldn't be one. Signed-off-by: Felix Kaechele <felix@kaechele.ca> SVN-Revision: 47865
* mktplinkfw: add missing exceeding bytes info to logsJohn Crispin2015-12-111-2/+2
| | | | | | | | Add the info on exceeding bytes also to the remaining log messages. Signed-off-by: Felix Kaechele <felix@kaechele.ca> SVN-Revision: 47864
* tools/squashfs: refresh patchesJohn Crispin2015-12-111-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47859
* tools/squashfs: add argument -fixed-time to set all timestampsJohn Crispin2015-12-112-0/+163
| | | | | | | | | -fixed-time <timestamp> set mkfs-timestamp and file-mtime to this timestamp. Reproducible builds requires the removal of all timestamp or setting all to a specific one. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 47858
* firmware-utils mkmerakifw: firmware generator for MR18John Crispin2015-12-112-0/+264
| | | | | | | | This patch adds firmware generation tool for Cisco's MR18 Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> SVN-Revision: 47856
* tools/mm-macros: update to 0.9.9Felix Fietkau2015-12-101-4/+3
| | | | | | | | | Update mm-macros (mm-common) to 0.9.9. Switch to use the @GNOME source download location. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47824
* update mtd-utils to 1.5.2Hauke Mehrtens2015-12-056-104/+7
| | | | | | | | | | | | - update mtd-utils to 1.5.2 (git a494d30ab1ae40cb7665680cadf5af3ca3830a73) - remove patches that went upstream - fixes build from scratch as of broken patches Signed-off-by: Sven Roederer <devel-sven@geroedel.de> [use the final version of 1.5.2 instead, fix header of jffs2_lzma_(de,)compress()] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47790
* tools: make-ext4fs: explicitely request C collation for sortingJo-Philipp Wich2015-12-021-3/+3
| | | | | | | | | Do not rely on the system default collaction when sorting directory entries but explicitely request "C" collation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47689
* tools/scons: update to 2.4.1John Crispin2015-11-211-2/+2
| | | | | | | | Update scons to 2.4.1. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47569
* tools/cmake: update to 3.4.0John Crispin2015-11-213-6/+6
| | | | | | | | | Update cmake to 3.4.0. Refresh patches. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47568
* tools: add isl (used for graphite on GCC 5)Felix Fietkau2015-11-132-4/+37
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47464
* tools/e2fsprogs: update to 1.42.13Felix Fietkau2015-11-084-17/+15
| | | | | | | | | Update e2fsprogs to 1.42.13. Refresh and cleanup patches. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47426
* tools/quilt: fix build error during kernel_menuconfig on a cleaned envFelix Fietkau2015-11-071-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | When running "make kernel_menuconfig" right after "make clean", we error out with the following message: Makefile:22: recipe for target '.../build_dir/target-arm_cortex-a7_musl-1.1.10_eabi/linux-.../linux-3.18.18/.quilt_checked' failed make[2]: [.../build_dir/target-arm_cortex-a7_musl-1.1.10_eabi/linux-.../linux-3.18.18/.quilt_checked] Error 127 (ignored) The root cause of the problem is located in the OpenWrt specific quilt patch, which sets the quilt install directory to $STAGING_DIR/../host. However, on a clean environment (right after running "make clean"), $STAGING_DIR doesn't exist. The "quilt" executable doesn't find its different commands, errors out, and creates this message. We're fixing it by using $STAGING_DIR_HOST rather than $STAGING_DIR, which is absolute. It will work even if there is no target directory yet. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47410
* tools/mm-macros: update to 0.9.8Felix Fietkau2015-11-061-4/+5
| | | | | | | | | Update mm-macros to 0.9.8. Add a secondary download location. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47393
* tools/scons: update to 2.4.0Felix Fietkau2015-11-061-4/+4
| | | | | | | | | Update scons to 2.4.0. Change mirror (as the previous one is missing the current version). Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47392
* brcm63xx: work around boot failures with squashfs on BCM6368Jonas Gorski2015-11-041-0/+2
| | | | | | | | | | | Due to the LWL/LWR SMP issue on BCM6368, booting with squash might fail if the rootfs is not word aligned. As a quick fix, work around it by ensuring this condition is always true. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47380
* tools/bison: update to 3.0.4Felix Fietkau2015-11-032-5/+4
| | | | | | | | | | Update bison to 3.0.4. Refresh patches. Drop the unnecessary PKG_CAT definition. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47370
* tools/mpfr: update to 3.1.3Felix Fietkau2015-11-032-8/+8
| | | | | | | | | Update mpfr to version 3.1.3. Refresh patches. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47369
* tools/mpc: update to 1.0.3Felix Fietkau2015-11-031-4/+4
| | | | | | | | | Update mpc version to 1.0.3. Change download location to @GNU. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47368
* tools/cmake: update to 3.3.2Felix Fietkau2015-10-313-17/+15
| | | | | | | | | Update cmake to 3.3.2 and refresh patches. Add a secondary download location. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47327
* tools/pkg-config: update to 0.29Felix Fietkau2015-10-303-49/+7
| | | | | | | | | | | | Release announcement: http://lists.freedesktop.org/archives/pkg-config/2015-September/001019.html Drop patches, as they have been implemented upstream. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix OSX compatibility] SVN-Revision: 47300
* tools/quilt: update to 0.64Felix Fietkau2015-10-303-20/+5
| | | | | | | | | | | Update quilt to version 0.64. Changelog: http://git.savannah.gnu.org/cgit/quilt.git/tree/NEWS?id=v0.64 Refresh patches. (scripts/inspect.in has been removed upstream) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47299
* tools/xz: update to 5.2.2Felix Fietkau2015-10-301-4/+5
| | | | | | | | | Update xz to version 5.2.2. Add a secondary download location. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47298
* tools: quilt: fix perl interpreter line (#20802)Jo-Philipp Wich2015-10-261-2/+58
| | | | | | | | | | When using '/usr/bin/env' in a shebang it is not possible to specify additional flags for the interpreter. Remove '-w' switches and add 'use warnings;' instead. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47278
* tools: scons: Add alternate download URLFlorian Fainelli2015-10-221-1/+2
| | | | | | | | | | | | | | | | sourceforge.net sometimes produces the following tarball file while being behind a HTTP proxy: We're sorry -- the Sourceforge site is currently in Disaster Recovery mode, and currently requires the use of javascript to function. Please check back later. Update to a regular FTP location that allows us to complete the download. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 47244
* ar71xx: Bitmain Antminer S1 & S3 cleanupJohn Crispin2015-10-191-2/+7
| | | | | | | | | | | | Sets the LEDs to boardname:color:led-name Sets the LAN to eth0 Other corrections such as the Machine Name and HWIDs v2 corrects the profile names in the Makefile and changes tabs to spaces in the Makefile 'define Device/' like the other devices. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 47221
* tools/firmware-utils: tplink-safeloader: add version 1.1 support to ↵John Crispin2015-10-191-4/+4
| | | | | | | | | | | | | | CPE210/220/510/520 The hardware is identical to version 1.0, add the new models to the support list. Also remove the empty line at the end of the support list, the current stock images don't have it either. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47212
* tools/firmware-utils: tplink-safeloader: fix support-list format, clean up ↵John Crispin2015-10-191-17/+30
| | | | | | | | | | | vendor information The first 4 bytes of the support list and the vendor information are supposed to contain the length of these fields. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47211
* tools/firmware-utils: tplink-safeloader: clean up codeJohn Crispin2015-10-191-11/+11
| | | | | | | | There is no reason for the internal functions not to be static. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47210
* firmware-utils/buffalo-enc: explicitly use signed char for checksum functionFelix Fietkau2015-10-121-1/+1
| | | | | | | | | ARM defaults to unsigned char and that breaks the calculation, as it relies on sign extension Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47186
* firmware-utils/buffalo-enc: add support for decrypting data with an offsetFelix Fietkau2015-10-121-3/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47185
* tools: firmware-utils: fix compiler warningsHauke Mehrtens2015-10-1115-29/+31
| | | | | | | | This just fixes a lot of compiler warnings. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47181