From 4828e8ff2315da37b2c05ed8598587c2e5684f1f Mon Sep 17 00:00:00 2001 From: Mirko Vogt Date: Sat, 21 Jan 2012 01:15:24 +0000 Subject: trying to make README file a bit more helpful SVN-Revision: 29837 --- README | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/README b/README index 2975e5c..6d2b27f 100644 --- a/README +++ b/README @@ -1,4 +1,4 @@ -This is the buildsystem for the OpenWrt Linux distribution +This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. @@ -6,18 +6,26 @@ configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. -Simply running 'make' will build your firmware. +Run "./scripts/feeds update" to get the latest package definitions +defined in feeds.conf / feeds.conf.default respectively +and "./scripts/feeds install" to install symlinks into "package/feeds/*". + +Use "make menuconfig" to configure your image. + +Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. -You can use scripts/flashing/flash.sh for remotely updating your embedded +You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution -and the tex4ht package to build the documentation. Type make -C docs/ to build it. +and the tex4ht package to build the documentation. Type "make -C docs/" to build it. + +To build your own firmware you need to have access to a Linux, BSD or MacOSX system +(case-sensitive filesystem required). Cygwin will not be supported because of +the lack of case sensitiveness in the file system. -Building your own firmware you need to have access to a Linux, BSD or MacOSX system. -Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project -- cgit v1.1