From 553a46972830d8a0eff4265eed150da49f050634 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 5 Aug 2013 10:41:48 +0000 Subject: ar71xx: add support for dir 505 a1 this patch is based on ... -> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902 Signed-off-by: John Crispin SVN-Revision: 37703 --- target/linux/ar71xx/base-files/etc/diag.sh | 1 + .../ar71xx/base-files/etc/uci-defaults/01_leds | 4 + .../ar71xx/base-files/etc/uci-defaults/02_network | 4 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-3.10 | 1 + .../ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c | 126 +++++++++++++++++++++ target/linux/ar71xx/generic/profiles/d-link.mk | 11 ++ target/linux/ar71xx/image/Makefile | 14 ++- .../623-MIPS-ath79-DIR505-support.patch | 45 ++++++++ 10 files changed, 211 insertions(+), 2 deletions(-) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c create mode 100644 target/linux/ar71xx/patches-3.10/623-MIPS-ath79-DIR505-support.patch diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 48c30ee..7b790e2 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -43,6 +43,7 @@ get_status_led() { db120) status_led="db120:green:status" ;; + dir-505-a1 |\ dir-600-a1 |\ dir-615-e4) status_led="d-link:green:power" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 2db8941..f55f1fe 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -57,6 +57,10 @@ rb-750) ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02" ;; +dir-505-a1) + ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1" + ;; + dir-600-a1|\ dir-615-e4) ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 3d09751..176c485 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -222,6 +222,10 @@ wp543) ucidef_set_interface_lan "eth0" ;; +dir-505-a1) + ucidef_set_interface_lan "eth1" + ;; + alfa-ap96 |\ alfa-nx |\ ap83 |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 14fdfb1..d64e4a0 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -243,6 +243,9 @@ ar71xx_board_detect() { *"DB120 reference board") name="db120" ;; + *"DIR-505 rev. A1") + name="dir-505-a1" + ;; *"DIR-600 rev. A1") name="dir-600-a1" ;; @@ -396,6 +399,9 @@ ar71xx_board_detect() { *TL-WR2543N*) name="tl-wr2543n" ;; + *DIR-505-A1) + name="dir-505-a1" + ;; *"DIR-615 rev. C1") name="dir-615-c1" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 308b4f1..1b3273d 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -105,6 +105,7 @@ platform_check_image() { ap81 | \ ap83 | \ ap132 | \ + dir-505-a1 | \ dir-600-a1 | \ dir-615-c1 | \ dir-615-e4 | \ diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 8695bad..6c75f14 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -38,6 +38,7 @@ CONFIG_ATH79_MACH_AW_NR580=y CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y CONFIG_ATH79_MACH_DB120=y +CONFIG_ATH79_MACH_DIR_505_A1=y CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y CONFIG_ATH79_MACH_DIR_825_B1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c new file mode 100644 index 0000000..651bb76 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c @@ -0,0 +1,126 @@ +/* + * DLink DIR-505 A1 board support + * + * Copyright (C) 2013 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define DIR_505A1_GPIO_BTN_WPS 11 /* verify */ +#define DIR_505A1_GPIO_BTN_RESET 12 /* verify */ + +#define DIR_505A1_GPIO_LED_RED 26 /* unused, fyi */ +#define DIR_505A1_GPIO_LED_GREEN 27 + +#define DIR_505A1_GPIO_WAN_LED_ENABLE 1 + +#define DIR_505A1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR_505A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_505A1_KEYS_POLL_INTERVAL) + +#define DIR_505A1_ART_ADDRESS 0x1f010000 +#define DIR_505A1_CALDATA_OFFSET 0x1000 +#define DIR_505A1_LAN_MAC_ADDRESS 0x1f020004 +#define DIR_505A1_WAN_MAC_ADDRESS 0x1f020016 + +static struct gpio_led dir_505_a1_leds_gpio[] __initdata = { + { + .name = "d-link:green:power", + .gpio = DIR_505A1_GPIO_LED_GREEN, + .active_low = 1, + }, { + .name = "d-link:red:status", + .gpio = DIR_505A1_GPIO_LED_RED, + .active_low = 1, + }, +}; + +static struct gpio_keys_button dir_505_a1_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_505A1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_505A1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init dir_505_a1_read_ascii_mac(u8 *dest, unsigned int src_addr) +{ + int ret; + u8 *src = (u8 *)KSEG1ADDR(src_addr); + + ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &dest[0], &dest[1], &dest[2], + &dest[3], &dest[4], &dest[5]); + + if (ret != ETH_ALEN) + memset(dest, 0, ETH_ALEN); +} + +static void __init dir_505_a1_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(DIR_505A1_ART_ADDRESS); + u8 lan_mac[ETH_ALEN]; + u8 wan_mac[ETH_ALEN]; + + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + gpio_request_one(DIR_505A1_GPIO_WAN_LED_ENABLE, + GPIOF_OUT_INIT_LOW, "WAN LED enable"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_505_a1_leds_gpio), + dir_505_a1_leds_gpio); + + ath79_register_gpio_keys_polled(1, DIR_505A1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_505_a1_gpio_keys), + dir_505_a1_gpio_keys); + + ath79_register_m25p80(NULL); + + ath79_register_usb(); + + dir_505_a1_read_ascii_mac(lan_mac, DIR_505A1_LAN_MAC_ADDRESS); + dir_505_a1_read_ascii_mac(wan_mac, DIR_505A1_WAN_MAC_ADDRESS); + + ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); + + ath79_register_mdio(0, 0x0); + ath79_register_eth(1); + ath79_register_eth(0); + + ath79_register_wmac(art + DIR_505A1_CALDATA_OFFSET, lan_mac); +} + +MIPS_MACHINE(ATH79_MACH_DIR_505_A1, "DIR-505-A1", + "D-Link DIR-505 rev. A1", dir_505_a1_setup); diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk index 47a6bec..dbb2c6a 100644 --- a/target/linux/ar71xx/generic/profiles/d-link.mk +++ b/target/linux/ar71xx/generic/profiles/d-link.mk @@ -5,6 +5,17 @@ # See /LICENSE for more information. # +define Profile/DIR505A1 + NAME:=D-Link DIR-505 rev. A1 + PACKAGES:= +endef + +define Profile/DIR505A1/Description + Package set optimized for the D-Link DIR-505 rev. A1. +endef + +$(eval $(call Profile,DIR505A1)) + define Profile/DIR600A1 NAME:=D-Link DIR-600 rev. A1 PACKAGES:= diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index a9f1f9e..b244b9c 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -164,6 +164,7 @@ ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1 cameo7240_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro cameo913x_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro cameo933x_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware) +cameo933x_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,1024k(kernel),6656k(rootfs),7680k@0x80000(firmware) cameo934x_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware) db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) @@ -384,7 +385,15 @@ define Image/Build/Cameo933x endef define Image/Build/Cameo933x/initramfs - $(call MkuImageLzma/initramfs,$(2),$(3) $(cameo933x_mtdlayout)) + $(call MkuImageLzma/initramfs,$(2),$(3),$(cameo933x_mtdlayout)) +endef + +define Image/Build/Cameo933x_8M + $(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo933x_mtdlayout_8M),1048576,6422528,$(4)) +endef + +define Image/Build/Cameo933x_8M/initramfs + $(call MkuImageLzma/initramfs,$(2),$(3) $(cameo933x_mtdlayout_8M)) endef define Image/Build/Cameo934x @@ -392,7 +401,7 @@ define Image/Build/Cameo934x endef define Image/Build/Cameo934x/initramfs - $(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo934x_mtdlayout)) + $(call Image/Build/Cameo,$(1),$(2),$(3) $(cameo934x_mtdlayout)) endef define Image/Build/Ath @@ -900,6 +909,7 @@ $(eval $(call SingleProfile,Cameo913x,$(fs_squash),TEW652BRP_RECOVERY,tew-652brp $(eval $(call SingleProfile,Cameo933x,$(fs_squash),TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,"")) $(eval $(call SingleProfile,Cameo933x,$(fs_squash),DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) +$(eval $(call SingleProfile,Cameo933x_8M,$(fs_squash),DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-RT-DIR505A1-3")) $(eval $(call SingleProfile,Cameo934x,$(fs_64k),DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) $(eval $(call SingleProfile,Cameo934x,$(fs_64k),DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) diff --git a/target/linux/ar71xx/patches-3.10/623-MIPS-ath79-DIR505-support.patch b/target/linux/ar71xx/patches-3.10/623-MIPS-ath79-DIR505-support.patch new file mode 100644 index 0000000..ee41f65 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/623-MIPS-ath79-DIR505-support.patch @@ -0,0 +1,45 @@ +Index: linux-3.10.4/arch/mips/ath79/Kconfig +=================================================================== +--- linux-3.10.4.orig/arch/mips/ath79/Kconfig 2013-08-04 19:08:12.739921385 +0200 ++++ linux-3.10.4/arch/mips/ath79/Kconfig 2013-08-04 19:09:15.379922883 +0200 +@@ -254,6 +254,16 @@ + select ATH79_DEV_USB + select MYLOADER + ++config ATH79_MACH_DIR_505_A1 ++ bool "D-Link DIR-505-A1 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ + config ATH79_MACH_DIR_600_A1 + bool "D-Link DIR-600 A1/DIR-615 E4 support" + select SOC_AR724X +Index: linux-3.10.4/arch/mips/ath79/Makefile +=================================================================== +--- linux-3.10.4.orig/arch/mips/ath79/Makefile 2013-08-04 19:07:36.299920522 +0200 ++++ linux-3.10.4/arch/mips/ath79/Makefile 2013-08-04 19:09:42.363923523 +0200 +@@ -53,6 +53,7 @@ + obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o + obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o + obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o +Index: linux-3.10.4/arch/mips/ath79/machtypes.h +=================================================================== +--- linux-3.10.4.orig/arch/mips/ath79/machtypes.h 2013-08-04 19:08:12.739921385 +0200 ++++ linux-3.10.4/arch/mips/ath79/machtypes.h 2013-08-04 19:09:29.715923222 +0200 +@@ -37,6 +37,7 @@ + ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ + ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ -- cgit v1.1