From 58eccdac4fb6b384dde8723876e69dafb8bf2368 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 3 Apr 2014 14:26:24 +0000 Subject: lantiq: fix vr9 ubi handling Signed-off-by: John Crispin SVN-Revision: 40364 --- target/linux/lantiq/config-default | 2 -- target/linux/lantiq/dts/FRITZ3370.dts | 31 +++++++++++++-------------- target/linux/lantiq/image/Makefile | 29 +++++++++++++++++++++---- target/linux/lantiq/image/ubinize-overlay.cfg | 21 ++++++++++++++++++ target/linux/lantiq/xrx200/config-default | 2 +- target/linux/lantiq/xrx200/profiles/avm.mk | 3 +++ target/linux/lantiq/xrx200/target.mk | 2 +- 7 files changed, 66 insertions(+), 24 deletions(-) create mode 100644 target/linux/lantiq/image/ubinize-overlay.cfg diff --git a/target/linux/lantiq/config-default b/target/linux/lantiq/config-default index c42c20d..1efab8b 100644 --- a/target/linux/lantiq/config-default +++ b/target/linux/lantiq/config-default @@ -87,8 +87,6 @@ CONFIG_LANTIQ_PHY=y CONFIG_LANTIQ_WDT=y CONFIG_LANTIQ_XRX200=y CONFIG_LEDS_GPIO=y -# CONFIG_LZO_COMPRESS is not set -# CONFIG_LZO_DECOMPRESS is not set CONFIG_MDIO_BOARDINFO=y CONFIG_MIPS=y # CONFIG_MIPS_HUGE_TLB_SUPPORT is not set diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts index 0017dde..c0202ba 100644 --- a/target/linux/lantiq/dts/FRITZ3370.dts +++ b/target/linux/lantiq/dts/FRITZ3370.dts @@ -6,7 +6,7 @@ model = "FRITZ3370 - Fritz!Box WLAN 3370"; chosen { - bootargs = "console=ttyLTQ0,115200"; + bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9"; }; memory@0 { @@ -23,8 +23,13 @@ #size-cells = <1>; partition@0 { - label = "firmware"; - reg = <0x00000 0x3400000>; + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "rootfs_ubi"; + reg = <0x400000 0x3000000>; }; partition@3400000 { @@ -55,23 +60,16 @@ lantiq,groups = "spi", "spi_cs4"; lantiq,function = "gpio"; }; - nand_out { - lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24"; - lantiq,function = "ebu"; - lantiq,direction = <1>; - lantiq,pull = <0>; - }; - nand_in { - lantiq,groups = "nand rdy"; - lantiq,function = "ebu"; - lantiq,direction = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; mdio { lantiq,groups = "mdio"; lantiq,function = "mdio"; }; + nand { + lantiq,groups = "nand cle", "nand ale", + "nand rd", "nand cs1", "nand rdy"; + lantiq,function = "ebu"; + lantiq,pull = <1>; + }; phy-rst { lantiq,pins = "io37", "io44"; lantiq,pull = <0>; @@ -104,6 +102,7 @@ #size-cells = <0>; reg = <0>; mac-address = [ 00 11 22 33 44 55 ]; + lantiq,switch; ethernet@0 { compatible = "lantiq,xrx200-pdi-port"; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 28cb96c..34591c7 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -54,10 +54,10 @@ define TPLinkImageLzma endef define MkImageEVA - lzma2eva 0x80002000 0x80002000 $(KDIR)/vmlinux-$(1).lzma $(KDIR)/$(1).eva.prealign - dd if=$(KDIR)/$(1).eva.prealign of=$(KDIR)/$(1).eva.align.64k bs=64k conv=sync - dd if=$(KDIR)/$(1).eva.prealign of=$(KDIR)/$(1).eva.align.128k bs=128k conv=sync - cat ./eva.dummy.squashfs >> $(KDIR)/$(1).eva.align.64k + lzma2eva 0x80002000 0x80002000 $(KDIR)/vmlinux$(2)-$(1).lzma $(KDIR)/$(1)$(2).eva.prealign + dd if=$(KDIR)/$(1)$(2).eva.prealign of=$(KDIR)/$(1)$(2).eva.align.64k bs=64k conv=sync + dd if=$(KDIR)/$(1)$(2).eva.prealign of=$(KDIR)/$(1)$(2).eva.align.128k bs=128k conv=sync + cat ./eva.dummy.squashfs >> $(KDIR)/$(1)$(2).eva.align.64k endef define CompressGzip @@ -93,6 +93,21 @@ define Image/BuildEVA/squashfs $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image.eva) endef +define Image/BuildEVA/ubifs + +ifneq ($($(PROFILE)_UBIFS_OPTS),) + $(CP) $(KDIR)/root.ubifs $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-rootfs.ubifs +endif +endef + +define Image/BuildEVA/ubi + +ifneq ($($(PROFILE)_UBI_OPTS),) + $(CP) $(KDIR)/root.ubi $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-rootfs.ubi + $(CP) $(KDIR)/root-overlay.ubi $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-rootfs-overlay.ubi +endif +endef + define Image/BuildLoader/squashfs dd if=$(KDIR)/loader-$(2).bin of=$(KDIR)/loader-$(2).bin.padded bs=1536k conv=sync cat $(KDIR)/loader-$(2).bin.padded $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image @@ -197,6 +212,12 @@ define Image/BuildKernelEVA/Template $(call MkImageEVA,$(1)) $(CP) $(KDIR)/$(1).eva.align.64k $(BIN_DIR)/$(IMG_PREFIX)-$(1).eva.align.64k $(CP) $(KDIR)/$(1).eva.align.128k $(BIN_DIR)/$(IMG_PREFIX)-$(1).eva.align.128k +ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) + $(call PatchKernelLzma,$(1),-initramfs) + $(call MkImageEVA,$(1),-initramfs) + $(CP) $(KDIR)/$(1)-initramfs.eva.align.64k $(BIN_DIR)/$(IMG_PREFIX)-$(1)-initramfs.eva.align.64k + $(CP) $(KDIR)/$(1)-initramfs.eva.align.128k $(BIN_DIR)/$(IMG_PREFIX)-$(1)-initramfs.eva.align.128k +endif endef define Image/BuildKernelGzip/Template diff --git a/target/linux/lantiq/image/ubinize-overlay.cfg b/target/linux/lantiq/image/ubinize-overlay.cfg new file mode 100644 index 0000000..ce8e5d9 --- /dev/null +++ b/target/linux/lantiq/image/ubinize-overlay.cfg @@ -0,0 +1,21 @@ +[rootfs] +# Volume mode (other option is static) +mode=ubi +# Source image +image=root.squashfs +# Volume ID in UBI image +vol_id=0 +# Allow for dynamic resize +vol_type=dynamic +# Volume name +vol_name=rootfs +[rootfs_data] +# Volume mode (other option is static) +mode=ubi +# Volume ID in UBI image +vol_id=1 +# Allow for dynamic resize +vol_type=dynamic +# Volume name +vol_name=rootfs_data +vol_size=1MiB diff --git a/target/linux/lantiq/xrx200/config-default b/target/linux/lantiq/xrx200/config-default index 4d25f21..4550431 100644 --- a/target/linux/lantiq/xrx200/config-default +++ b/target/linux/lantiq/xrx200/config-default @@ -29,7 +29,7 @@ CONFIG_MTD_NAND_XWAY=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 # CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_GLUEBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_NLS=y CONFIG_PCIE_LANTIQ=y diff --git a/target/linux/lantiq/xrx200/profiles/avm.mk b/target/linux/lantiq/xrx200/profiles/avm.mk index 77c1a0a..7eb6830 100644 --- a/target/linux/lantiq/xrx200/profiles/avm.mk +++ b/target/linux/lantiq/xrx200/profiles/avm.mk @@ -7,4 +7,7 @@ define Profile/FRITZ3370 ltq-vdsl-app ppp-mod-pppoa endef +FRITZ3370_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096" +FRITZ3370_UBI_OPTS:="-m 2048 -p 128KiB -s 512" + $(eval $(call Profile,FRITZ3370)) diff --git a/target/linux/lantiq/xrx200/target.mk b/target/linux/lantiq/xrx200/target.mk index 47d9be6..0c64668 100644 --- a/target/linux/lantiq/xrx200/target.mk +++ b/target/linux/lantiq/xrx200/target.mk @@ -5,7 +5,7 @@ FEATURES:=squashfs atm mips16 jffs2 ubifs CPU_TYPE:=34kc CPU_SUBTYPE:=dsp -DEFAULT_PACKAGES+=kmod-leds-gpio kmod-gpio-button-hotplug +DEFAULT_PACKAGES+=kmod-leds-gpio kmod-gpio-button-hotplug swconfig define Target/Description Lantiq XRX200 -- cgit v1.1