From 9786b53efb8225f5b6f21921e684b40b9febe61e Mon Sep 17 00:00:00 2001 From: Edmunt Pienkowsky Date: Sat, 21 Oct 2017 11:07:43 +0200 Subject: ramips: fix Youku-YK1 support Remove the ephy-pins from the ethernet device tree node. The ephy-pins are useed to controll the ePHY LEDs and this board doesn't have these. Instead one of the ePHY pins is used in GPIO mode to control the WAN LED. Use the switch LED trigger to control the WAN LED. Move the power LED handling to diag.sh to show the boot status via this LED. Add the missing kernel packages for USB and microSD card reader to the default package selection. Fix the maximum image size value. The board has a 32MByte flash chip. Fixes: FS#1055 Signed-off-by: Edmunt Pienkowsky [make the commit message more verbose, remove GPIO pinmux for pins not used as GPIOs] Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/etc/board.d/01_leds | 2 +- target/linux/ramips/base-files/etc/diag.sh | 3 ++- target/linux/ramips/dts/YOUKU-YK1.dts | 3 +-- target/linux/ramips/image/mt7620.mk | 3 ++- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 75ab0da..037331d 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -461,9 +461,9 @@ zte-q7) set_wifi_led "$board:blue:status" ;; youku-yk1) - ucidef_set_led_default "power" "power" "$board:blue:power" "1" set_wifi_led "$board:blue:air" set_usb_led "$board:blue:usb" + ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x10" ;; esac diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 4411bab..3b3c455 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -134,7 +134,8 @@ get_status_led() { wl-330n3g|\ wli-tx4-ag300n|\ y1|\ - y1s) + y1s|\ + youku-yk1) status_led="$board:blue:power" ;; db-wrt01|\ diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts index d4e3c90..8a0e081 100644 --- a/target/linux/ramips/dts/YOUKU-YK1.dts +++ b/target/linux/ramips/dts/YOUKU-YK1.dts @@ -96,7 +96,7 @@ &pinctrl { state_default: pinctrl0 { default { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; + ralink,group = "i2c", "rgmii1", "ephy", "wled"; ralink,function = "gpio"; }; }; @@ -104,7 +104,6 @@ ðernet { pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; mtd-mac-address = <&factory 0x4>; mediatek,portmap = "llllw"; }; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 8eac6f5..2f3f59e 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -505,8 +505,9 @@ TARGET_DEVICES += y1s define Device/youku-yk1 DTS := YOUKU-YK1 - IMAGE_SIZE := $(ralink_default_fw_size_16M) + IMAGE_SIZE := $(ralink_default_fw_size_32M) DEVICE_TITLE := YOUKU YK1 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += youku-yk1 -- cgit v1.1