From 9f3f61a0d968fbe7b93899f948f3c34612683ba6 Mon Sep 17 00:00:00 2001 From: Ryan Mounce Date: Sat, 3 Jun 2017 02:01:06 +0930 Subject: mvebu: add support for Turris Omnia Adds support for the Turris Omnia and builds an eMMC sysupgrade image in the same format as the SolidRun ClearFog. An initramfs image in the simple yet Omnia-specific 'medkit' image format is also built in order to ease the initial flashing process. Notable hardware support omissions are support for switching between SFP cage and copper PHY, and RGB LED control. Due to a current limitation of DSA, only 1/2 CPU switch uplinks are used. Specifications: - Marvell Armada 385 1.6GHz dual-core ARMv7 CPU - 1GB DDR3 RAM - 8GB eMMC Flash - 5x Gigabit LAN via Marvell 88E6176 Switch (2x RGMII CPU ports) - 1x switchable RJ45 (88E1514 PHY) / SFP SGMII WAN - 2x USB 3.0 - 12x dimmable RGB LEDs controlled by independent MCU - 3x Mini PCIe slots - Optional Compex WLE200N2 Mini PCIe AR9287 2x2 802.11b/g/n (2.4GHz) - Optional Compex WLE900VX Mini PCIe QCA9880 3x3 802.11ac (2.4 / 5GHz) - Optional Quectel EC20 Mini PCIe LTE modem Flash instructions: If the U-Boot environment has been modified previously (likely manually via serial console), first use serial to reset the default environment. => env default -a => saveenv Method 1 - USB 'medkit' image w/o serial - Copy openwrt-mvebu-turris-omnia-sysupgrade.img.gz and omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz to the root of a USB flash drive formatted with FAT32 / ext2/3/4 / btrfs / XFS. Note that the medkit MUST be named omnia-medkit*.tar.gz - Disconnect other USB devices from the Omnia and connect the flash drive to either USB port. - Power on the Omnia and hold down the rear reset button until 4 LEDs are illuminated, then release. - Wait approximately 2 minutes for the Turris Omnia to flash itself with the temporary image, during which LEDs will change multiple times. - Connect a computer to a LAN port of the Turris Omnia with a DHCP client - (if necessary) ssh-keygen -R 192.168.1.1 - ssh root@192.168.1.1 $ mount /dev/sda1 /mnt $ sysupgrade /mnt/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself and you can remove the flash drive. Method 2 - TFTP w/ serial - Extract omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz and copy dtb + zImage to your TFTP server (rename if desired) - Connect Turris Omnia WAN port to DHCP-enabled network with TFTP server - Connect serial console and interrupt U-Boot => dhcp => setenv serverip => tftpboot 0x01000000 zImage => tftpboot 0x02000000 dtb => bootz 0x01000000 - 0x02000000 - OpenWrt will now boot from ramdisk - Download openwrt-mvebu-turris-omnia-sysupgrade.img.gz to /tmp/ $ sysupgrade /tmp/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself. Signed-off-by: Ryan Mounce --- package/boot/uboot-envtools/files/mvebu | 3 +++ .../linux/mvebu/base-files/etc/board.d/02_network | 4 ++++ target/linux/mvebu/base-files/lib/mvebu.sh | 3 +++ .../linux/mvebu/base-files/lib/upgrade/platform.sh | 4 ++-- .../linux/mvebu/base-files/lib/upgrade/sdcard.sh | 12 ++++++++++ target/linux/mvebu/config-4.14 | 11 ++++++++- target/linux/mvebu/image/Makefile | 28 ++++++++++++++++++++++ 7 files changed, 62 insertions(+), 3 deletions(-) diff --git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu index e33830e..24ca679 100644 --- a/package/boot/uboot-envtools/files/mvebu +++ b/package/boot/uboot-envtools/files/mvebu @@ -22,6 +22,9 @@ armada-385-linksys-shelby) armada-385-linksys-rango) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" ;; +armada-385-turris-omnia) + ubootenv_add_uci_config "/dev/mtd0" "0xC0000" "0x10000" "0x40000" + ;; armada-xp-linksys-mamba) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000" ;; diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network index 4fc9540..36c4b23 100755 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/base-files/etc/board.d/02_network @@ -23,6 +23,10 @@ armada-xp-linksys-mamba) ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1" ;; +armada-385-turris-omnia) + ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4" + ucidef_set_interface_wan "eth2" + ;; armada-388-clearfog-*) # eth0 is standalone ethernet # eth1 is switch (-pro) or standalone ethernet (-base) diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh index fb3ddee..1cd8750 100755 --- a/target/linux/mvebu/base-files/lib/mvebu.sh +++ b/target/linux/mvebu/base-files/lib/mvebu.sh @@ -59,6 +59,9 @@ mvebu_board_detect() { *"SolidRun Clearfog Base A1") name="armada-388-clearfog-base" ;; + *"Turris Omnia") + name="armada-385-turris-omnia" + ;; esac [ -z "$name" ] && name="unknown" diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh index b59c765..ef8065a 100755 --- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh @@ -16,7 +16,7 @@ platform_do_upgrade() { armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba) platform_do_upgrade_linksys "$ARGV" ;; - armada-388-clearfog-base|armada-388-clearfog-pro) + armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro) platform_do_upgrade_sdcard "$ARGV" ;; *) @@ -29,7 +29,7 @@ platform_copy_config() { armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba) platform_copy_config_linksys ;; - armada-388-clearfog-base|armada-388-clearfog-pro) + armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro) platform_copy_config_sdcard "$ARGV" ;; esac diff --git a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh index de6e1a9..fbf121f 100644 --- a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh @@ -18,8 +18,20 @@ platform_check_image_sdcard() { } platform_do_upgrade_sdcard() { + local board=$(board_name) + sync get_image "$1" | dd of=/dev/mmcblk0 bs=2M conv=fsync + + case "$board" in + armada-385-turris-omnia) + fw_setenv openwrt_bootargs 'earlyprintk console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=auto rootwait' + fw_setenv openwrt_mmcload 'setenv bootargs "$openwrt_bootargs cfg80211.freg=$regdomain"; fatload mmc 0 0x01000000 zImage; fatload mmc 0 0x02000000 armada-385-turris-omnia.dtb' + fw_setenv factory_mmcload 'setenv bootargs "$bootargs cfg80211.freg=$regdomain"; btrload mmc 0 0x01000000 boot/zImage @; btrload mmc 0 0x02000000 boot/dtb @' + fw_setenv mmcboot 'mw 0xf10184a0 0xfd4d4cfa; run openwrt_mmcload || run factory_mmcload; bootz 0x01000000 - 0x02000000' + ;; + esac + sleep 1 } diff --git a/target/linux/mvebu/config-4.14 b/target/linux/mvebu/config-4.14 index 71123f52..738f037 100644 --- a/target/linux/mvebu/config-4.14 +++ b/target/linux/mvebu/config-4.14 @@ -207,9 +207,12 @@ CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GLOB=y CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_MVEBU=y CONFIG_GPIO_PCA953X=y -# CONFIG_GPIO_PCA953X_IRQ is not set +CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_SYSFS=y # CONFIG_GRO_CELLS is not set CONFIG_HANDLE_DOMAIN_IRQ=y @@ -346,7 +349,13 @@ CONFIG_MVSW61XX_PHY=y CONFIG_MV_XOR=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEON=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_MV88E6XXX=y +CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_SWITCHDEV=y CONFIG_NLS=y CONFIG_NOP_USB_XCEIV=y CONFIG_NO_BOOTMEM=y diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile index 68adfc3..823552d 100644 --- a/target/linux/mvebu/image/Makefile +++ b/target/linux/mvebu/image/Makefile @@ -48,6 +48,17 @@ define Build/sdcard-img 83 $$ROOTFS_SIZE $(IMAGE_ROOTFS) endef +define Build/omnia-medkit-initramfs + $(TAR) -c -T /dev/null -f $@ + rm -rf $(dir $(IMAGE_KERNEL))boot + mkdir -p $(dir $(IMAGE_KERNEL))boot/boot/ + cp $(KDIR)/zImage-initramfs $(dir $(IMAGE_KERNEL))boot/boot/zImage + cp $(DTS_DIR)/$(DEVICE_DTS).dtb $(dir $(IMAGE_KERNEL))boot/boot/dtb + $(TAR) -rp --numeric-owner --owner=0 --group=0 --sort=name \ + $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ + --file=$@ -C $(dir $(IMAGE_KERNEL))boot/ . +endef + define Device/Default PROFILES := Default DEVICE_DTS := $(1) @@ -226,4 +237,21 @@ define Device/globalscale-mirabox endef TARGET_DEVICES += globalscale-mirabox +define Device/turris-omnia + KERNEL_INSTALL := 1 + KERNEL := kernel-bin + KERNEL_INITRAMFS := kernel-bin + DEVICE_TITLE := Turris Omnia + DEVICE_PACKAGES := \ + mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \ + wpad-mini kmod-ath9k kmod-ath10k ath10k-firmware-qca988x + IMAGES := $$(IMAGE_PREFIX)-sysupgrade.img.gz omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz + IMAGE/$$(IMAGE_PREFIX)-sysupgrade.img.gz := boot-img | sdcard-img | gzip | append-metadata + IMAGE/omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip + IMAGE_NAME = $$(2) + DEVICE_DTS := armada-385-turris-omnia + UBOOT := +endef +TARGET_DEVICES += turris-omnia + $(eval $(call BuildImage)) -- cgit v1.1