From 15a14cf1665ef3d8b5c77cce69b52d131340e3b3 Mon Sep 17 00:00:00 2001 From: Yutang Jiang Date: Sat, 29 Oct 2016 00:18:23 +0800 Subject: layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang --- ...-driver-spi-add-exceed-16MB-flash-support.patch | 144 +++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 package/boot/uboot-layerscape/patches/0036-driver-spi-add-exceed-16MB-flash-support.patch (limited to 'package/boot/uboot-layerscape/patches/0036-driver-spi-add-exceed-16MB-flash-support.patch') diff --git a/package/boot/uboot-layerscape/patches/0036-driver-spi-add-exceed-16MB-flash-support.patch b/package/boot/uboot-layerscape/patches/0036-driver-spi-add-exceed-16MB-flash-support.patch new file mode 100644 index 0000000..c43ae97 --- /dev/null +++ b/package/boot/uboot-layerscape/patches/0036-driver-spi-add-exceed-16MB-flash-support.patch @@ -0,0 +1,144 @@ +From e70ae7f7ed00ecdbfa45fac3f342f1130df5029b Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Fri, 20 May 2016 16:37:34 +0800 +Subject: [PATCH 36/93] driver: spi: add exceed 16MB flash support + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi/spi_flash.c | 41 +++++++++++------------------------------ + 1 file changed, 11 insertions(+), 30 deletions(-) + +diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c +index 9d61ac0..e9d1c64 100644 +--- a/drivers/mtd/spi/spi_flash.c ++++ b/drivers/mtd/spi/spi_flash.c +@@ -21,9 +21,9 @@ + + DECLARE_GLOBAL_DATA_PTR; + +-static void spi_flash_addr(u32 addr, u8 *cmd, u32 offset_ext) ++static void spi_flash_addr(u32 addr, u8 *cmd) + { +- if (offset_ext >= SPI_FLASH_16MB_BOUN) { ++ if (addr >= SPI_FLASH_16MB_BOUN) { + /* cmd[0] is actual command */ + cmd[1] = addr >> 24; + cmd[2] = addr >> 16; +@@ -312,9 +312,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) + u32 erase_size, erase_addr; + u8 *cmd, cmdsz; + int ret = -1; +- u32 offset_ext; + +- offset_ext = offset; + erase_size = flash->erase_size; + if (offset % erase_size || len % erase_size) { + debug("SF: Erase offset/length not multiple of erase size\n"); +@@ -329,10 +327,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) + } + } + +- if (offset > SPI_FLASH_16MB_BOUN) +- cmdsz = SPI_FLASH_CMD_LEN_EXT + flash->dummy_byte; +- else +- cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte; ++ cmdsz = SPI_FLASH_CMD_LEN_EXT + flash->dummy_byte; + cmd = calloc(1, cmdsz); + if (!cmd) { + debug("SF: Failed to allocate cmd\n"); +@@ -353,7 +348,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) + if (ret < 0) + return ret; + #endif +- spi_flash_addr(erase_addr, cmd, offset_ext); ++ spi_flash_addr(erase_addr, cmd); + + debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], + cmd[2], cmd[3], erase_addr); +@@ -380,9 +375,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, + size_t chunk_len, actual; + u8 *cmd, cmdsz; + int ret = -1; +- u32 offset_ext; + +- offset_ext = offset; + page_size = flash->page_size; + + if (flash->flash_is_locked) { +@@ -393,10 +386,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, + } + } + +- if (offset > SPI_FLASH_16MB_BOUN) +- cmdsz = SPI_FLASH_CMD_LEN_EXT + flash->dummy_byte; +- else +- cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte; ++ cmdsz = SPI_FLASH_CMD_LEN_EXT + flash->dummy_byte; + cmd = calloc(1, cmdsz); + if (!cmd) { + debug("SF: Failed to allocate cmd\n"); +@@ -423,7 +413,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, + chunk_len = min(chunk_len, + (size_t)flash->spi->max_write_size); + +- spi_flash_addr(write_addr, cmd, offset_ext); ++ spi_flash_addr(write_addr, cmd); + + debug("SF: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); +@@ -477,9 +467,6 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + u32 remain_len, read_len, read_addr; + int bank_sel = 0; + int ret = -1; +- u32 offset_ext; +- +- offset_ext = offset; + + /* Handle memory-mapped SPI */ + if (flash->memory_map) { +@@ -494,10 +481,8 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + spi_release_bus(flash->spi); + return 0; + } +- if (offset > SPI_FLASH_16MB_BOUN) +- cmdsz = SPI_FLASH_CMD_LEN_EXT + flash->dummy_byte; +- else +- cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte; ++ ++ cmdsz = SPI_FLASH_CMD_LEN_EXT + flash->dummy_byte; + cmd = calloc(1, cmdsz); + if (!cmd) { + debug("SF: Failed to allocate cmd\n"); +@@ -508,7 +493,6 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + + while (len) { + read_addr = offset; +- + #ifdef CONFIG_SF_DUAL_FLASH + if (flash->dual_flash > SF_SINGLE_FLASH) + spi_flash_dual(flash, &read_addr); +@@ -519,18 +503,15 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + return ret; + bank_sel = flash->bank_curr; + #endif +- if (offset_ext >= SPI_FLASH_16MB_BOUN) { +- remain_len = flash->size - offset; +- } else { +- remain_len = ((SPI_FLASH_16MB_BOUN << flash->shift) * ++ remain_len = ((flash->size << flash->shift) * + (bank_sel + 1)) - offset; +- } ++ + if (len < remain_len) + read_len = len; + else + read_len = remain_len; + +- spi_flash_addr(read_addr, cmd, offset_ext); ++ spi_flash_addr(read_addr, cmd); + + ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); + if (ret < 0) { +-- +1.7.9.5 + -- cgit v1.1