From ac383f95a515c4092f7fafe91046b8443beceaef Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 3 Jan 2013 02:07:11 +0000 Subject: broadcom-diag: add diag support for Linksys E1000 V1 This adds diag leds/buttons support for Linksys E1000 V1. It worked on my router, however it may need some tweaking by people more familiar with openwrt and c to make it fit for commiting. Thank you hhm for this patch. SVN-Revision: 34996 --- package/broadcom-diag/src/diag.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'package/broadcom-diag/src') diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index 7e0ff02..997fbe8 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -63,6 +63,7 @@ enum { WRT600NV11, WRT610N, WRT610NV2, + E1000V1, E3000V1, /* ASUS */ @@ -421,6 +422,25 @@ static struct platform_t __initdata platforms[] = { { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED }, }, + /* same hardware as WRT160NV3 and Cisco Valet M10V1, but different board detection, combine? */ + [E1000V1] = { + .name = "Linksys E1000 V1", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "wps", .gpio = 1 << 5 }, /* nvram get gpio5=wps_button */ + }, + .leds = { + /** turns on leds for all ethernet ports (wan too) + * this also disconnects some, or maybe all, ethernet ports + * 1: leds work normally + * 0: all lit all the time */ + /* nvram get gpio3=robo_reset */ + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "ses_blue", .gpio = 1 << 4, .polarity = REVERSE }, /* nvram get gpio4=wps_led */ + { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE }, /* nvram get gpio2=wps_status_led */ + }, + }, [E3000V1] = { .name = "Linksys E3000 V1", .buttons = { @@ -1156,6 +1176,13 @@ static struct platform_t __init *platform_detect(void) } } + if (!strcmp(boardtype, "0x04cd")) { + if (!strcmp(getvar("boot_hw_model"), "E100")) { + if (!strcmp(getvar("boot_hw_ver"), "1.0")) + return &platforms[E1000V1]; + } + } + /* default to WRT54G */ return &platforms[WRT54G]; } -- cgit v1.1