From 2ab260e917ee2ffa4d215aac2c7be093d48f76d2 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 10 Nov 2007 19:00:53 +0000
Subject: move wlcompat to the broadcom-wl package
SVN-Revision: 9528
---
.../broadcom-wl/src/wlc/include/proto/bcmevent.h | 152 ---------------------
1 file changed, 152 deletions(-)
delete mode 100644 package/broadcom-wl/src/wlc/include/proto/bcmevent.h
(limited to 'package/broadcom-wl/src/wlc/include/proto/bcmevent.h')
diff --git a/package/broadcom-wl/src/wlc/include/proto/bcmevent.h b/package/broadcom-wl/src/wlc/include/proto/bcmevent.h
deleted file mode 100644
index d922a5d..0000000
--- a/package/broadcom-wl/src/wlc/include/proto/bcmevent.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Broadcom Event protocol definitions
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- *
- * Dependencies: proto/bcmeth.h
- *
- * $Id: bcmevent.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $
- *
- */
-
-/*
- * Broadcom Ethernet Events protocol defines
- *
- */
-
-#ifndef _BCMEVENT_H_
-#define _BCMEVENT_H_
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define PACKED __attribute__((packed))
-#else
-#pragma pack(1)
-#define PACKED
-#endif /* defined(__GNUC__) */
-
-#define BCM_EVENT_MSG_VERSION 1 /* wl_event_msg_t struct version */
-#define BCM_MSG_IFNAME_MAX 16 /* max length of interface name */
-
-/* flags */
-#define WLC_EVENT_MSG_LINK 0x01 /* link is up */
-#define WLC_EVENT_MSG_FLUSHTXQ 0x02 /* flush tx queue on MIC error */
-#define WLC_EVENT_MSG_GROUP 0x04 /* group MIC error */
-
-/* theses fields are stored in network order */
-typedef struct
-{
- uint16 version;
- uint16 flags; /* see flags below */
- uint32 event_type; /* Message (see below) */
- uint32 status; /* Status code (see below) */
- uint32 reason; /* Reason code (if applicable) */
- uint32 auth_type; /* WLC_E_AUTH */
- uint32 datalen; /* data buf */
- struct ether_addr addr; /* Station address (if applicable) */
- char ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
-} PACKED wl_event_msg_t;
-
-/* used by driver msgs */
-typedef struct bcm_event {
- struct ether_header eth;
- bcmeth_hdr_t bcm_hdr;
- wl_event_msg_t event;
- /* data portion follows */
-} PACKED bcm_event_t;
-
-#define BCM_MSG_LEN (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
-
-/* Event messages */
-#define WLC_E_SET_SSID 0 /* indicates status of set SSID */
-#define WLC_E_JOIN 1 /* differentiates join IBSS from found (WLC_E_START) IBSS */
-#define WLC_E_START 2 /* STA founded an IBSS or AP started a BSS */
-#define WLC_E_AUTH 3 /* 802.11 AUTH request */
-#define WLC_E_AUTH_IND 4 /* 802.11 AUTH indication */
-#define WLC_E_DEAUTH 5 /* 802.11 DEAUTH request */
-#define WLC_E_DEAUTH_IND 6 /* 802.11 DEAUTH indication */
-#define WLC_E_ASSOC 7 /* 802.11 ASSOC request */
-#define WLC_E_ASSOC_IND 8 /* 802.11 ASSOC indication */
-#define WLC_E_REASSOC 9 /* 802.11 REASSOC request */
-#define WLC_E_REASSOC_IND 10 /* 802.11 REASSOC indication */
-#define WLC_E_DISASSOC 11 /* 802.11 DISASSOC request */
-#define WLC_E_DISASSOC_IND 12 /* 802.11 DISASSOC indication */
-#define WLC_E_QUIET_START 13 /* 802.11h Quiet period started */
-#define WLC_E_QUIET_END 14 /* 802.11h Quiet period ended */
-#define WLC_E_BEACON_RX 15 /* BEACONS received/lost indication */
-#define WLC_E_LINK 16 /* generic link indication */
-#define WLC_E_MIC_ERROR 17 /* TKIP MIC error occurred */
-#define WLC_E_NDIS_LINK 18 /* NDIS style link indication */
-#define WLC_E_ROAM 19 /* roam attempt occurred: indicate status & reason */
-#define WLC_E_TXFAIL 20 /* change in dot11FailedCount (txfail) */
-#define WLC_E_PMKID_CACHE 21 /* WPA2 pmkid cache indication */
-#define WLC_E_RETROGRADE_TSF 22 /* current AP's TSF value went backward */
-#define WLC_E_PRUNE 23 /* AP was pruned from join list for reason */
-#define WLC_E_AUTOAUTH 24 /* report AutoAuth table entry match for join attempt */
-#define WLC_E_EAPOL_MSG 25 /* Event encapsulating an EAPOL message */
-#define WLC_E_SCAN_COMPLETE 26 /* Scan results are ready or scan was aborted */
-#define WLC_E_ADDTS_IND 27 /* indicate to host addts fail/success */
-#define WLC_E_DELTS_IND 28 /* indicate to host delts fail/success */
-#define WLC_E_BCNSENT_IND 29 /* indicate to host of beacon transmit */
-#define WLC_E_BCNRX_MSG 30 /* Send the received beacon up to the host */
-#define WLC_E_LAST 31 /* highest val + 1 for range checking */
-
-/* Event status codes */
-#define WLC_E_STATUS_SUCCESS 0 /* operation was successful */
-#define WLC_E_STATUS_FAIL 1 /* operation failed */
-#define WLC_E_STATUS_TIMEOUT 2 /* operation timed out */
-#define WLC_E_STATUS_NO_NETWORKS 3 /* failed due to no matching network found */
-#define WLC_E_STATUS_ABORT 4 /* operation was aborted */
-#define WLC_E_STATUS_NO_ACK 5 /* protocol failure: packet not ack'd */
-#define WLC_E_STATUS_UNSOLICITED 6 /* AUTH or ASSOC packet was unsolicited */
-#define WLC_E_STATUS_ATTEMPT 7 /* attempt to assoc to an auto auth configuration */
-
-/* roam reason codes */
-#define WLC_E_REASON_INITIAL_ASSOC 0 /* initial assoc */
-#define WLC_E_REASON_LOW_RSSI 1 /* roamed due to low RSSI */
-#define WLC_E_REASON_DEAUTH 2 /* roamed due to DEAUTH indication */
-#define WLC_E_REASON_DISASSOC 3 /* roamed due to DISASSOC indication */
-#define WLC_E_REASON_BCNS_LOST 4 /* roamed due to lost beacons */
-#define WLC_E_REASON_FAST_ROAM_FAILED 5 /* roamed due to fast roam failure */
-#define WLC_E_REASON_DIRECTED_ROAM 6 /* roamed due to request by AP */
-#define WLC_E_REASON_TSPEC_REJECTED 7 /* roamed due to TSPEC rejection */
-#define WLC_E_REASON_BETTER_AP 8 /* roamed due to finding better AP */
-
-/* prune reason codes */
-#define WLC_E_PRUNE_ENCR_MISMATCH 1 /* ecryption mismatch */
-#define WLC_E_PRUNE_BCAST_BSSID 2 /* AP uses a broadcast BSSID */
-#define WLC_E_PRUNE_MAC_DENY 3 /* STA's MAC addr is in AP's MAC deny list */
-#define WLC_E_PRUNE_MAC_NA 4 /* STA's MAC addr is not in AP's MAC allow list */
-#define WLC_E_PRUNE_REG_PASSV 5 /* AP not allowed due to regulatory restriction */
-#define WLC_E_PRUNE_SPCT_MGMT 6 /* AP does not support STA locale spectrum mgmt */
-#define WLC_E_PRUNE_RADAR 7 /* AP is on a radar channel of STA locale */
-#define WLC_E_RSN_MISMATCH 8 /* STA does not support AP's RSN */
-#define WLC_E_PRUNE_NO_COMMON_RATES 9 /* No rates in common with AP */
-#define WLC_E_PRUNE_BASIC_RATES 10 /* STA does not support all basic rates of BSS */
-#define WLC_E_PRUNE_CCXFAST_PREVAP 11 /* CCX FAST ROAM: prune previous AP */
-#define WLC_E_PRUNE_CIPHER_NA 12 /* BSS's cipher not supported */
-#define WLC_E_PRUNE_KNOWN_STA 13 /* AP is already known to us as a STA */
-#define WLC_E_PRUNE_CCXFAST_DROAM 14 /* CCX FAST ROAM: prune unqulified AP */
-#define WLC_E_PRUNE_WDS_PEER 15 /* AP is already known to us as a WDS peer */
-#define WLC_E_PRUNE_QBSS_LOAD 16 /* QBSS LOAD - AAC is too low */
-#define WLC_E_PRUNE_HOME_AP 17 /* prune home AP */
-
-/* WLC_SET_CALLBACK data type */
-typedef struct wlc_event_cb {
- void (*fn)(void *, bcm_event_t *); /* Callback function */
- void *context; /* Passed to callback function */
-} wlc_event_cb_t;
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif /* PACKED */
-
-#endif /* _BCMEVENT_H_ */
--
cgit v1.1