From f4f553efa787e1f8f25bb2176f5e6c4c3aa659a9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 25 May 2014 17:42:09 +0000 Subject: busybox: update to 1.22.1 Signed-off-by: Felix Fietkau SVN-Revision: 40852 --- package/utils/busybox/config/Config.in | 64 +++- package/utils/busybox/config/archival/Config.in | 148 +++++---- .../utils/busybox/config/console-tools/Config.in | 1 - package/utils/busybox/config/coreutils/Config.in | 40 ++- package/utils/busybox/config/debianutils/Config.in | 1 - package/utils/busybox/config/e2fsprogs/Config.in | 1 - .../config/e2fsprogs/old_e2fsprogs/Config.in | 1 - package/utils/busybox/config/editors/Config.in | 134 ++++---- package/utils/busybox/config/libbb/Config.in | 25 +- package/utils/busybox/config/loginutils/Config.in | 18 ++ package/utils/busybox/config/mailutils/Config.in | 1 - package/utils/busybox/config/miscutils/Config.in | 44 ++- package/utils/busybox/config/modutils/Config.in | 2 +- package/utils/busybox/config/networking/Config.in | 40 ++- .../busybox/config/networking/udhcp/Config.in | 7 +- package/utils/busybox/config/printutils/Config.in | 1 - package/utils/busybox/config/procps/Config.in | 123 ++++---- package/utils/busybox/config/runit/Config.in | 1 - package/utils/busybox/config/selinux/Config.in | 1 - package/utils/busybox/config/shell/Config.in | 4 + package/utils/busybox/config/sysklogd/Config.in | 17 +- package/utils/busybox/config/util-linux/Config.in | 350 +++++---------------- .../busybox/config/util-linux/volume_id/Config.in | 304 ++++++++++++++++++ 23 files changed, 772 insertions(+), 556 deletions(-) create mode 100644 package/utils/busybox/config/util-linux/volume_id/Config.in (limited to 'package/utils/busybox/config') diff --git a/package/utils/busybox/config/Config.in b/package/utils/busybox/config/Config.in index 25892ff..71ba45b 100644 --- a/package/utils/busybox/config/Config.in +++ b/package/utils/busybox/config/Config.in @@ -82,20 +82,21 @@ config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_IN_BSS endchoice config BUSYBOX_CONFIG_SHOW_USAGE - bool "Show terse applet usage messages" + bool "Show applet usage messages" default BUSYBOX_DEFAULT_SHOW_USAGE help - All BusyBox applets will show help messages when invoked with - wrong arguments. You can turn off printing these terse usage - messages if you say no here. - This will save you up to 7k. + Enabling this option, BusyBox applets will show terse help messages + when invoked with wrong arguments. + If you do not want to show any (helpful) usage message when + issuing wrong command syntax, you can say 'N' here, + saving approximately 7k. config BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE bool "Show verbose applet usage messages" default BUSYBOX_DEFAULT_FEATURE_VERBOSE_USAGE depends on BUSYBOX_CONFIG_SHOW_USAGE help - All BusyBox applets will show more verbose help messages when + All BusyBox applets will show verbose help messages when busybox is invoked with --help. This will add a lot of text to the busybox binary. In the default configuration, this will add about 13k, but it can add much more depending on your configuration. @@ -105,8 +106,8 @@ config BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE default BUSYBOX_DEFAULT_FEATURE_COMPRESS_USAGE depends on BUSYBOX_CONFIG_SHOW_USAGE help - Store usage messages in compressed form, uncompress them on-the-fly - when --help is called. + Store usage messages in .bz compressed form, uncompress them + on-the-fly when --help is called. If you have a really tiny busybox with few applets enabled (and bunzip2 isn't one of them), the overhead of the decompressor might @@ -159,12 +160,13 @@ config BUSYBOX_CONFIG_UNICODE_USING_LOCALE Internal implementation is smaller. config BUSYBOX_CONFIG_FEATURE_CHECK_UNICODE_IN_ENV - bool "Check $LANG environment variable" + bool "Check $LC_ALL, $LC_CTYPE and $LANG environment variables" default BUSYBOX_DEFAULT_FEATURE_CHECK_UNICODE_IN_ENV depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && !BUSYBOX_CONFIG_UNICODE_USING_LOCALE help With this option on, Unicode support is activated - only if LANG variable has the value of the form "xxxx.utf8" + only if locale-related variables have the value of the form + "xxxx.utf8" Otherwise, Unicode support will be always enabled and active. @@ -308,7 +310,18 @@ config BUSYBOX_CONFIG_FEATURE_PIDFILE default BUSYBOX_DEFAULT_FEATURE_PIDFILE help This option makes some applets (e.g. crond, syslogd, inetd) write - a pidfile in /var/run. Some applications rely on them. + a pidfile at the configured PID_FILE_PATH. It has no effect + on applets which require pidfiles to run. + +config BUSYBOX_CONFIG_PID_FILE_PATH + string "Path to directory for pidfile" + default BUSYBOX_DEFAULT_PID_FILE_PATH + depends on BUSYBOX_CONFIG_FEATURE_PIDFILE + help + This is the default path where pidfiles are created. Applets which + allow you to set the pidfile path on the command line will override + this value. The option has no effect on applets that require you to + specify a pidfile path. config BUSYBOX_CONFIG_FEATURE_SUID bool "Support for SUID/SGID handling" @@ -319,7 +332,7 @@ config BUSYBOX_CONFIG_FEATURE_SUID root-level operations even when run by ordinary users (for example, mounting of user mounts in fstab needs this). - Busybox will automatically drop priviledges for applets + Busybox will automatically drop privileges for applets that don't need root access. If you are really paranoid and don't want to do this, build two @@ -598,12 +611,39 @@ config BUSYBOX_CONFIG_CROSS_COMPILER_PREFIX Native builds leave this empty. +config BUSYBOX_CONFIG_SYSROOT + string "Path to sysroot" + default BUSYBOX_DEFAULT_SYSROOT + help + If you want to build BusyBox with a cross compiler, then you + might also need to specify where /usr/include and /usr/lib + will be found. + + For example, BusyBox can be built against an installed + Android NDK, platform version 9, for ARM ABI with + + CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm + + Native builds leave this empty. + config BUSYBOX_CONFIG_EXTRA_CFLAGS string "Additional CFLAGS" default BUSYBOX_DEFAULT_EXTRA_CFLAGS help Additional CFLAGS to pass to the compiler verbatim. +config BUSYBOX_CONFIG_EXTRA_LDFLAGS + string "Additional LDFLAGS" + default BUSYBOX_DEFAULT_EXTRA_LDFLAGS + help + Additional LDFLAGS to pass to the linker verbatim. + +config BUSYBOX_CONFIG_EXTRA_LDLIBS + string "Additional LDLIBS" + default BUSYBOX_DEFAULT_EXTRA_LDLIBS + help + Additional LDLIBS to pass to the linker with -l. + endmenu menu 'Debugging Options' diff --git a/package/utils/busybox/config/archival/Config.in b/package/utils/busybox/config/archival/Config.in index b178d0c..e977bb4 100644 --- a/package/utils/busybox/config/archival/Config.in +++ b/package/utils/busybox/config/archival/Config.in @@ -6,8 +6,6 @@ menu "Archival Utilities" - - config BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ bool "Make tar, rpm, modprobe etc understand .xz data" default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_XZ @@ -33,10 +31,10 @@ config BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ Make tar, rpm, modprobe etc understand .gz data. config BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z - bool "Make tar and gunzip understand .Z data" + bool "tar, rpm, modprobe etc understand .Z data" default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_Z help - Make tar and gunzip understand .Z data. + Make tar, rpm, modprobe etc understand .Z data. config BUSYBOX_CONFIG_AR bool "ar" @@ -77,7 +75,19 @@ config BUSYBOX_CONFIG_FEATURE_AR_CREATE depends on BUSYBOX_CONFIG_AR help This enables archive creation (-c and -r) with busybox ar. - +config BUSYBOX_CONFIG_UNCOMPRESS + bool "uncompress" + default BUSYBOX_DEFAULT_UNCOMPRESS + help + uncompress is used to decompress archives created by compress. + Not much used anymore, replaced by gzip/gunzip. +config BUSYBOX_CONFIG_GUNZIP + bool "gunzip" + default BUSYBOX_DEFAULT_GUNZIP + help + gunzip is used to decompress archives created by gzip. + You can use the `-t' option to test the integrity of + an archive, without decompressing it. config BUSYBOX_CONFIG_BUNZIP2 bool "bunzip2" default BUSYBOX_DEFAULT_BUNZIP2 @@ -90,7 +100,46 @@ config BUSYBOX_CONFIG_BUNZIP2 Unless you have a specific application which requires bunzip2, you should probably say N here. +config BUSYBOX_CONFIG_UNLZMA + bool "unlzma" + default BUSYBOX_DEFAULT_UNLZMA + help + unlzma is a compression utility using the Lempel-Ziv-Markov chain + compression algorithm, and range coding. Compression + is generally considerably better than that achieved by the bzip2 + compressors. + + The BusyBox unlzma applet is limited to decompression only. + On an x86 system, this applet adds about 4K. +config BUSYBOX_CONFIG_FEATURE_LZMA_FAST + bool "Optimize unlzma for speed" + default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST + depends on BUSYBOX_CONFIG_UNLZMA + help + This option reduces decompression time by about 25% at the cost of + a 1K bigger binary. + +config BUSYBOX_CONFIG_LZMA + bool "Provide lzma alias which supports only unpacking" + default BUSYBOX_DEFAULT_LZMA + depends on BUSYBOX_CONFIG_UNLZMA + help + Enable this option if you want commands like "lzma -d" to work. + IOW: you'll get lzma applet, but it will always require -d option. +config BUSYBOX_CONFIG_UNXZ + bool "unxz" + default BUSYBOX_DEFAULT_UNXZ + help + unxz is a unlzma successor. + +config BUSYBOX_CONFIG_XZ + bool "Provide xz alias which supports only unpacking" + default BUSYBOX_DEFAULT_XZ + depends on BUSYBOX_CONFIG_UNXZ + help + Enable this option if you want commands like "xz -d" to work. + IOW: you'll get xz applet, but it will always require -d option. config BUSYBOX_CONFIG_BZIP2 bool "bzip2" default BUSYBOX_DEFAULT_BZIP2 @@ -103,7 +152,6 @@ config BUSYBOX_CONFIG_BZIP2 Unless you have a specific application which requires bzip2, you should probably say N here. - config BUSYBOX_CONFIG_CPIO bool "cpio" default BUSYBOX_DEFAULT_CPIO @@ -132,7 +180,6 @@ config BUSYBOX_CONFIG_FEATURE_CPIO_P depends on BUSYBOX_CONFIG_FEATURE_CPIO_O help Passthrough mode. Rarely used. - config BUSYBOX_CONFIG_DPKG bool "dpkg" default BUSYBOX_DEFAULT_DPKG @@ -143,7 +190,6 @@ config BUSYBOX_CONFIG_DPKG This implementation of dpkg has a number of limitations, you should use the official dpkg if possible. - config BUSYBOX_CONFIG_DPKG_DEB bool "dpkg_deb" default BUSYBOX_DEFAULT_DPKG_DEB @@ -165,15 +211,6 @@ config BUSYBOX_CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY "ar -p data.tar.gz | tar -zx". However it saves space as none of the extra dpkg-deb, ar or tar options are needed, they are linked to internally. - -config BUSYBOX_CONFIG_GUNZIP - bool "gunzip" - default BUSYBOX_DEFAULT_GUNZIP - help - gunzip is used to decompress archives created by gzip. - You can use the `-t' option to test the integrity of - an archive, without decompressing it. - config BUSYBOX_CONFIG_GZIP bool "gzip" default BUSYBOX_DEFAULT_GZIP @@ -188,6 +225,17 @@ config BUSYBOX_CONFIG_FEATURE_GZIP_LONG_OPTIONS help Enable use of long options, increases size by about 106 Bytes +config BUSYBOX_CONFIG_GZIP_FAST + int "Trade memory for gzip speed (0:small,slow - 2:fast,big)" + default BUSYBOX_DEFAULT_GZIP_FAST + range 0 2 + depends on BUSYBOX_CONFIG_GZIP + help + Enable big memory options for gzip. + 0: small buffers, small hash-tables + 1: larger buffers, larger hash-tables + 2: larger buffers, largest hash-tables + Larger models may give slightly better compression config BUSYBOX_CONFIG_LZOP bool "lzop" default BUSYBOX_DEFAULT_LZOP @@ -202,19 +250,16 @@ config BUSYBOX_CONFIG_LZOP_COMPR_HIGH High levels (7,8,9) of lzop compression. These levels are actually slower than gzip at equivalent compression ratios and take up 3.2K of code. - -config BUSYBOX_CONFIG_RPM2CPIO - bool "rpm2cpio" - default BUSYBOX_DEFAULT_RPM2CPIO - help - Converts a RPM file into a CPIO archive. - config BUSYBOX_CONFIG_RPM bool "rpm" default BUSYBOX_DEFAULT_RPM help Mini RPM applet - queries and extracts RPM packages. - +config BUSYBOX_CONFIG_RPM2CPIO + bool "rpm2cpio" + default BUSYBOX_DEFAULT_RPM2CPIO + help + Converts a RPM file into a CPIO archive. config BUSYBOX_CONFIG_TAR bool "tar" default BUSYBOX_DEFAULT_TAR @@ -314,59 +359,6 @@ config BUSYBOX_CONFIG_FEATURE_TAR_SELINUX help With this option busybox supports restoring SELinux labels when extracting files from tar archives. - -config BUSYBOX_CONFIG_UNCOMPRESS - bool "uncompress" - default BUSYBOX_DEFAULT_UNCOMPRESS - help - uncompress is used to decompress archives created by compress. - Not much used anymore, replaced by gzip/gunzip. - -config BUSYBOX_CONFIG_UNLZMA - bool "unlzma" - default BUSYBOX_DEFAULT_UNLZMA - help - unlzma is a compression utility using the Lempel-Ziv-Markov chain - compression algorithm, and range coding. Compression - is generally considerably better than that achieved by the bzip2 - compressors. - - The BusyBox unlzma applet is limited to de-compression only. - On an x86 system, this applet adds about 4K. - - Unless you have a specific application which requires unlzma, you - should probably say N here. - -config BUSYBOX_CONFIG_FEATURE_LZMA_FAST - bool "Optimize unlzma for speed" - default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST - depends on BUSYBOX_CONFIG_UNLZMA - help - This option reduces decompression time by about 25% at the cost of - a 1K bigger binary. - -config BUSYBOX_CONFIG_LZMA - bool "Provide lzma alias which supports only unpacking" - default BUSYBOX_DEFAULT_LZMA - depends on BUSYBOX_CONFIG_UNLZMA - help - Enable this option if you want commands like "lzma -d" to work. - IOW: you'll get lzma applet, but it will always require -d option. - -config BUSYBOX_CONFIG_UNXZ - bool "unxz" - default BUSYBOX_DEFAULT_UNXZ - help - unxz is a unlzma successor. - -config BUSYBOX_CONFIG_XZ - bool "Provide xz alias which supports only unpacking" - default BUSYBOX_DEFAULT_XZ - depends on BUSYBOX_CONFIG_UNXZ - help - Enable this option if you want commands like "xz -d" to work. - IOW: you'll get xz applet, but it will always require -d option. - config BUSYBOX_CONFIG_UNZIP bool "unzip" default BUSYBOX_DEFAULT_UNZIP diff --git a/package/utils/busybox/config/console-tools/Config.in b/package/utils/busybox/config/console-tools/Config.in index 43ff71c..53937d2 100644 --- a/package/utils/busybox/config/console-tools/Config.in +++ b/package/utils/busybox/config/console-tools/Config.in @@ -7,7 +7,6 @@ menu "Console Utilities" - config BUSYBOX_CONFIG_CHVT bool "chvt" default BUSYBOX_DEFAULT_CHVT diff --git a/package/utils/busybox/config/coreutils/Config.in b/package/utils/busybox/config/coreutils/Config.in index e98c0ca..c00eca9 100644 --- a/package/utils/busybox/config/coreutils/Config.in +++ b/package/utils/busybox/config/coreutils/Config.in @@ -58,6 +58,12 @@ config BUSYBOX_CONFIG_FEATURE_DATE_COMPAT With this option off, 'date DATE' is 'date -s DATE' support the same format. With it on, 'date DATE' additionally supports MMDDhhmm[[YY]YY][.ss] format. +config BUSYBOX_CONFIG_HOSTID + bool "hostid" + default BUSYBOX_DEFAULT_HOSTID + help + hostid prints the numeric identifier (in hexadecimal) for + the current host. config BUSYBOX_CONFIG_ID bool "id" default BUSYBOX_DEFAULT_ID @@ -88,6 +94,21 @@ config BUSYBOX_CONFIG_TOUCH help touch is used to create or change the access and/or modification timestamp of specified files. + +config BUSYBOX_CONFIG_FEATURE_TOUCH_NODEREF + bool "Add support for -h" + default BUSYBOX_DEFAULT_FEATURE_TOUCH_NODEREF + depends on BUSYBOX_CONFIG_TOUCH + help + Enable touch to have the -h option. + This requires libc support for lutimes() function. + +config BUSYBOX_CONFIG_FEATURE_TOUCH_SUSV3 + bool "Add support for SUSV3 features (-d -t -r)" + default BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3 + depends on BUSYBOX_CONFIG_TOUCH + help + Enable touch to use a reference file or a given date/time argument. config BUSYBOX_CONFIG_TR bool "tr" default BUSYBOX_DEFAULT_TR @@ -393,13 +414,6 @@ config BUSYBOX_CONFIG_FEATURE_FANCY_HEAD help This enables the head options (-c, -q, and -v). -config BUSYBOX_CONFIG_HOSTID - bool "hostid" - default BUSYBOX_DEFAULT_HOSTID - help - hostid prints the numeric identifier (in hexadecimal) for - the current host. - config BUSYBOX_CONFIG_INSTALL bool "install" default BUSYBOX_DEFAULT_INSTALL @@ -645,6 +659,12 @@ config BUSYBOX_CONFIG_SHA512SUM help Compute and check SHA512 message digest +config BUSYBOX_CONFIG_SHA3SUM + bool "sha3sum" + default BUSYBOX_DEFAULT_SHA3SUM + help + Compute and check SHA3 (512-bit) message digest + config BUSYBOX_CONFIG_SLEEP bool "sleep" default BUSYBOX_DEFAULT_SLEEP @@ -897,13 +917,13 @@ config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE help Allow df, du, and ls to have human readable output. -comment "Common options for md5sum, sha1sum, sha256sum, sha512sum" - depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM +comment "Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum" + depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM || BUSYBOX_CONFIG_SHA3SUM config BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK bool "Enable -c, -s and -w options" default BUSYBOX_DEFAULT_FEATURE_MD5_SHA1_SUM_CHECK - depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM + depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM || BUSYBOX_CONFIG_SHA3SUM help Enabling the -c options allows files to be checked against pre-calculated hash values. diff --git a/package/utils/busybox/config/debianutils/Config.in b/package/utils/busybox/config/debianutils/Config.in index da18af1..533ad47 100644 --- a/package/utils/busybox/config/debianutils/Config.in +++ b/package/utils/busybox/config/debianutils/Config.in @@ -7,7 +7,6 @@ menu "Debian Utilities" - config BUSYBOX_CONFIG_MKTEMP bool "mktemp" default BUSYBOX_DEFAULT_MKTEMP diff --git a/package/utils/busybox/config/e2fsprogs/Config.in b/package/utils/busybox/config/e2fsprogs/Config.in index e200bfc..f826240 100644 --- a/package/utils/busybox/config/e2fsprogs/Config.in +++ b/package/utils/busybox/config/e2fsprogs/Config.in @@ -7,7 +7,6 @@ menu "Linux Ext2 FS Progs" - config BUSYBOX_CONFIG_CHATTR bool "chattr" default BUSYBOX_DEFAULT_CHATTR diff --git a/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in b/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in index a0ba296..d7a5396 100644 --- a/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in +++ b/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in @@ -7,7 +7,6 @@ menu "Linux Ext2 FS Progs" - config BUSYBOX_CONFIG_CHATTR bool "chattr" default BUSYBOX_DEFAULT_CHATTR diff --git a/package/utils/busybox/config/editors/Config.in b/package/utils/busybox/config/editors/Config.in index 3956156..90f9f00 100644 --- a/package/utils/busybox/config/editors/Config.in +++ b/package/utils/busybox/config/editors/Config.in @@ -6,11 +6,77 @@ menu "Editors" +config BUSYBOX_CONFIG_AWK + bool "awk" + default BUSYBOX_DEFAULT_AWK + help + Awk is used as a pattern scanning and processing language. This is + the BusyBox implementation of that programming language. + +config BUSYBOX_CONFIG_FEATURE_AWK_LIBM + bool "Enable math functions (requires libm)" + default BUSYBOX_DEFAULT_FEATURE_AWK_LIBM + depends on BUSYBOX_CONFIG_AWK + help + Enable math functions of the Awk programming language. + NOTE: This will require libm to be present for linking. + +config BUSYBOX_CONFIG_FEATURE_AWK_GNU_EXTENSIONS + bool "Enable a few GNU extensions" + default BUSYBOX_DEFAULT_FEATURE_AWK_GNU_EXTENSIONS + depends on BUSYBOX_CONFIG_AWK + help + Enable a few features from gawk: + * command line option -e AWK_PROGRAM + * simultaneous use of -f and -e on the command line. + This enables the use of awk library files. + Ex: awk -f mylib.awk -e '{print myfunction($1);}' ... +config BUSYBOX_CONFIG_CMP + bool "cmp" + default BUSYBOX_DEFAULT_CMP + help + cmp is used to compare two files and returns the result + to standard output. +config BUSYBOX_CONFIG_DIFF + bool "diff" + default BUSYBOX_DEFAULT_DIFF + help + diff compares two files or directories and outputs the + differences between them in a form that can be given to + the patch command. + +config BUSYBOX_CONFIG_FEATURE_DIFF_LONG_OPTIONS + bool "Enable long options" + default BUSYBOX_DEFAULT_FEATURE_DIFF_LONG_OPTIONS + depends on BUSYBOX_CONFIG_DIFF && BUSYBOX_CONFIG_LONG_OPTS + help + Enable use of long options. + +config BUSYBOX_CONFIG_FEATURE_DIFF_DIR + bool "Enable directory support" + default BUSYBOX_DEFAULT_FEATURE_DIFF_DIR + depends on BUSYBOX_CONFIG_DIFF + help + This option enables support for directory and subdirectory + comparison. +config BUSYBOX_CONFIG_ED + bool "ed" + default BUSYBOX_DEFAULT_ED + help + The original 1970's Unix text editor, from the days of teletypes. + Small, simple, evil. Part of SUSv3. If you're not already using + this, you don't need it. config BUSYBOX_CONFIG_PATCH bool "patch" default BUSYBOX_DEFAULT_PATCH help Apply a unified diff formatted patch. +config BUSYBOX_CONFIG_SED + bool "sed" + default BUSYBOX_DEFAULT_SED + help + sed is used to perform text transformations on a file + or input from a pipeline. config BUSYBOX_CONFIG_VI bool "vi" default BUSYBOX_DEFAULT_VI @@ -127,74 +193,6 @@ config BUSYBOX_CONFIG_FEATURE_VI_ASK_TERMINAL This is not clean but helps a lot on serial lines and such. -config BUSYBOX_CONFIG_FEATURE_VI_OPTIMIZE_CURSOR - bool "Optimize cursor movement" - default BUSYBOX_DEFAULT_FEATURE_VI_OPTIMIZE_CURSOR - depends on BUSYBOX_CONFIG_VI - help - This will make the cursor movement faster, but requires more memory - and it makes the applet a tiny bit larger. - -config BUSYBOX_CONFIG_AWK - bool "awk" - default BUSYBOX_DEFAULT_AWK - help - Awk is used as a pattern scanning and processing language. This is - the BusyBox implementation of that programming language. - -config BUSYBOX_CONFIG_FEATURE_AWK_LIBM - bool "Enable math functions (requires libm)" - default BUSYBOX_DEFAULT_FEATURE_AWK_LIBM - depends on BUSYBOX_CONFIG_AWK - help - Enable math functions of the Awk programming language. - NOTE: This will require libm to be present for linking. - -config BUSYBOX_CONFIG_CMP - bool "cmp" - default BUSYBOX_DEFAULT_CMP - help - cmp is used to compare two files and returns the result - to standard output. - -config BUSYBOX_CONFIG_DIFF - bool "diff" - default BUSYBOX_DEFAULT_DIFF - help - diff compares two files or directories and outputs the - differences between them in a form that can be given to - the patch command. - -config BUSYBOX_CONFIG_FEATURE_DIFF_LONG_OPTIONS - bool "Enable long options" - default BUSYBOX_DEFAULT_FEATURE_DIFF_LONG_OPTIONS - depends on BUSYBOX_CONFIG_DIFF && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options. - -config BUSYBOX_CONFIG_FEATURE_DIFF_DIR - bool "Enable directory support" - default BUSYBOX_DEFAULT_FEATURE_DIFF_DIR - depends on BUSYBOX_CONFIG_DIFF - help - This option enables support for directory and subdirectory - comparison. - -config BUSYBOX_CONFIG_ED - bool "ed" - default BUSYBOX_DEFAULT_ED - help - The original 1970's Unix text editor, from the days of teletypes. - Small, simple, evil. Part of SUSv3. If you're not already using - this, you don't need it. - -config BUSYBOX_CONFIG_SED - bool "sed" - default BUSYBOX_DEFAULT_SED - help - sed is used to perform text transformations on a file - or input from a pipeline. - config BUSYBOX_CONFIG_FEATURE_ALLOW_EXEC bool "Allow vi and awk to execute shell commands" default BUSYBOX_DEFAULT_FEATURE_ALLOW_EXEC diff --git a/package/utils/busybox/config/libbb/Config.in b/package/utils/busybox/config/libbb/Config.in index fbccae5..e66a15b 100644 --- a/package/utils/busybox/config/libbb/Config.in +++ b/package/utils/busybox/config/libbb/Config.in @@ -28,9 +28,9 @@ config BUSYBOX_CONFIG_PASSWORD_MINLEN help Minimum allowable password length. -config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED +config BUSYBOX_CONFIG_MD5_SMALL int "MD5: Trade bytes for speed (0:fast, 3:slow)" - default BUSYBOX_DEFAULT_MD5_SIZE_VS_SPEED + default BUSYBOX_DEFAULT_MD5_SMALL range 0 3 help Trade binary size versus speed for the md5sum algorithm. @@ -42,6 +42,16 @@ config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED 2 3.0 5088 3 (smallest) 5.1 4912 +config BUSYBOX_CONFIG_SHA3_SMALL + int "SHA3: Trade bytes for speed (0:fast, 1:slow)" + default BUSYBOX_DEFAULT_SHA3_SMALL + range 0 1 + help + Trade binary size versus speed for the sha3sum algorithm. + SHA3_SMALL=0 compared to SHA3_SMALL=1 (approximate): + 64-bit x86: +270 bytes of code, 45% faster + 32-bit x86: +450 bytes of code, 75% faster + config BUSYBOX_CONFIG_FEATURE_FAST_TOP bool "Faster /proc scanning code (+100 bytes)" default BUSYBOX_DEFAULT_FEATURE_FAST_TOP @@ -108,6 +118,13 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY help Enable history saving in shells. +config BUSYBOX_CONFIG_FEATURE_EDITING_SAVE_ON_EXIT + bool "Save history on shell exit, not after every command" + default BUSYBOX_DEFAULT_FEATURE_EDITING_SAVE_ON_EXIT + depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY + help + Save history on shell exit, not after every command. + config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH bool "Reverse history search" default BUSYBOX_DEFAULT_FEATURE_REVERSE_SEARCH @@ -198,8 +215,8 @@ config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS However, some systems do not mount anything on /. If you need to configure busybox for one of these systems, - you may find useful to turn this option off to make df show - initramfs statistic. + you may find it useful to turn this option off to make df show + initramfs statistics. Otherwise, choose Y. diff --git a/package/utils/busybox/config/loginutils/Config.in b/package/utils/busybox/config/loginutils/Config.in index 4d77ddb..7fbe6a0 100644 --- a/package/utils/busybox/config/loginutils/Config.in +++ b/package/utils/busybox/config/loginutils/Config.in @@ -216,6 +216,17 @@ config BUSYBOX_CONFIG_LOGIN Note that Busybox binary must be setuid root for this applet to work properly. +config BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD + bool "Run logged in session in a child process" + default BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD if BUSYBOX_CONFIG_PAM + depends on BUSYBOX_CONFIG_LOGIN + help + Run the logged in session in a child process. This allows + login to clean up things such as utmp entries or PAM sessions + when the login session is complete. If you use PAM, you + almost always would want this to be set to Y, else PAM session + will not be cleaned up. + config BUSYBOX_CONFIG_PAM bool "Support for PAM (Pluggable Authentication Modules)" default BUSYBOX_DEFAULT_PAM @@ -283,6 +294,13 @@ config BUSYBOX_CONFIG_CHPASSWD Reads a file of user name and password pairs from standard input and uses this information to update a group of existing users. +config BUSYBOX_CONFIG_FEATURE_DEFAULT_PASSWD_ALGO + string "Default password encryption method (passwd -a, cryptpw -m parameter)" + default BUSYBOX_DEFAULT_FEATURE_DEFAULT_PASSWD_ALGO + depends on BUSYBOX_CONFIG_PASSWD || BUSYBOX_CONFIG_CRYPTPW + help + Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512". + config BUSYBOX_CONFIG_SU bool "su" default BUSYBOX_DEFAULT_SU diff --git a/package/utils/busybox/config/mailutils/Config.in b/package/utils/busybox/config/mailutils/Config.in index 36f7a4a..64b9a2b 100644 --- a/package/utils/busybox/config/mailutils/Config.in +++ b/package/utils/busybox/config/mailutils/Config.in @@ -2,7 +2,6 @@ menu "Mail Utilities" - config BUSYBOX_CONFIG_MAKEMIME bool "makemime" default BUSYBOX_DEFAULT_MAKEMIME diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in index b0ddc85..0e0e459 100644 --- a/package/utils/busybox/config/miscutils/Config.in +++ b/package/utils/busybox/config/miscutils/Config.in @@ -36,14 +36,11 @@ config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS brackets, facilitating programming. config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS - bool "Enable extra flags" + bool "Enable -m/-M" default BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS depends on BUSYBOX_CONFIG_LESS help - The extra flags provided do the following: - - The -M flag enables a more sophisticated status line. - The -m flag enables a simpler status line with a percentage. + The -M/-m flag enables a more sophisticated status line. config BUSYBOX_CONFIG_FEATURE_LESS_MARKS bool "Enable marks" @@ -106,6 +103,18 @@ config BUSYBOX_CONFIG_NANDDUMP select BUSYBOX_CONFIG_PLATFORM_LINUX help Dump the content of raw NAND chip +config BUSYBOX_CONFIG_RFKILL + bool "rfkill" + default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04 + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Enable/disable wireless devices. + + rfkill list : list all wireless devices + rfkill list bluetooth : list all bluetooth devices + rfkill list 1 : list device corresponding to the given index + rfkill block|unblock wlan : block/unblock all wlan(wifi) devices + config BUSYBOX_CONFIG_SETSERIAL bool "setserial" default BUSYBOX_DEFAULT_SETSERIAL @@ -153,6 +162,12 @@ config BUSYBOX_CONFIG_UBIUPDATEVOL select BUSYBOX_CONFIG_PLATFORM_LINUX help Update a UBI volume. +config BUSYBOX_CONFIG_WALL + bool "wall" + default BUSYBOX_DEFAULT_WALL + depends on BUSYBOX_CONFIG_FEATURE_UTMP + help + Write a message to all users that are logged in. config BUSYBOX_CONFIG_ADJTIMEX bool "adjtimex" @@ -656,18 +671,6 @@ config BUSYBOX_CONFIG_READAHEAD As readahead(2) blocks until each file has been read, it is best to run this applet as a background job. -config BUSYBOX_CONFIG_RFKILL - bool "rfkill" - default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04 - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Enable/disable wireless devices. - - rfkill list : list all wireless devices - rfkill list bluetooth : list all bluetooth devices - rfkill list 1 : list device corresponding to the given index - rfkill block|unblock wlan : block/unblock all wlan(wifi) devices - config BUSYBOX_CONFIG_RUNLEVEL bool "runlevel" default BUSYBOX_DEFAULT_RUNLEVEL @@ -744,13 +747,6 @@ config BUSYBOX_CONFIG_VOLNAME help Prints a CD-ROM volume name. -config BUSYBOX_CONFIG_WALL - bool "wall" - default BUSYBOX_DEFAULT_WALL - depends on BUSYBOX_CONFIG_FEATURE_UTMP - help - Write a message to all users that are logged in. - config BUSYBOX_CONFIG_WATCHDOG bool "watchdog" default BUSYBOX_DEFAULT_WATCHDOG diff --git a/package/utils/busybox/config/modutils/Config.in b/package/utils/busybox/config/modutils/Config.in index cf263a3..9add56e 100644 --- a/package/utils/busybox/config/modutils/Config.in +++ b/package/utils/busybox/config/modutils/Config.in @@ -253,7 +253,7 @@ config BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS config BUSYBOX_CONFIG_DEFAULT_MODULES_DIR string "Default directory containing modules" default BUSYBOX_DEFAULT_DEFAULT_MODULES_DIR - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO + depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO help Directory that contains kernel modules. Defaults to "/lib/modules" diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in index 26bde15..80dd42a 100644 --- a/package/utils/busybox/config/networking/Config.in +++ b/package/utils/busybox/config/networking/Config.in @@ -55,7 +55,7 @@ config BUSYBOX_CONFIG_NC_SERVER Allow netcat to act as a server. config BUSYBOX_CONFIG_NC_EXTRA - bool "Netcat extensions (-eiw and filename)" + bool "Netcat extensions (-eiw and -f FILE)" default BUSYBOX_DEFAULT_NC_EXTRA depends on BUSYBOX_CONFIG_NC help @@ -71,7 +71,7 @@ config BUSYBOX_CONFIG_NC_110_COMPAT This option makes nc closely follow original nc-1.10. The code is about 2.5k bigger. It enables -s ADDR, -n, -u, -v, -o FILE, -z options, but loses - busybox-specific extensions: -f FILE and -ll. + busybox-specific extensions: -f FILE. config BUSYBOX_CONFIG_PING bool "ping" default BUSYBOX_DEFAULT_PING @@ -292,14 +292,22 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH help Utilizes password settings from /etc/httpd.conf for basic authentication on a per url basis. + Example for httpd.conf file: + /adm:toor:PaSsWd config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 bool "Support MD5 crypted passwords for http Authentication" default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5 depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH help - Enables basic per URL authentication from /etc/httpd.conf - using md5 passwords. + Enables encrypted passwords, and wildcard user/passwords + in httpd.conf file. + User '*' means 'any system user name is ok', + password of '*' means 'use system password for this user' + Examples: + /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0 + /adm:root:* + /wiki:*:* config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI bool "Support Common Gateway Interface (CGI)" @@ -316,8 +324,8 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR help This option enables support for running scripts through an interpreter. Turn this on if you want PHP scripts to work - properly. You need to supply an additional line in your httpd - config file: + properly. You need to supply an additional line in your + httpd.conf file: *.php:/path/to/your/php config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV @@ -1036,8 +1044,8 @@ config BUSYBOX_CONFIG_WGET bool "wget" default BUSYBOX_DEFAULT_WGET help - wget is a utility for non-interactive download of files from HTTP, - HTTPS, and FTP servers. + wget is a utility for non-interactive download of files from HTTP + and FTP servers. config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR bool "Enable a nifty process meter (+2k)" @@ -1061,16 +1069,18 @@ config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS Support long options for the wget applet. config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT - bool "Enable read timeout option -T SEC" + bool "Enable timeout option -T SEC" default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT depends on BUSYBOX_CONFIG_WGET help - Supports network read timeout for wget, so that wget will give - up and timeout when reading network data, through the -T command - line option. Currently only network data read timeout is - supported (i.e., timeout is not applied to the DNS nor TCP - connection initialization). When FEATURE_WGET_LONG_OPTIONS is - also enabled, the --timeout option will work in addition to -T. + Supports network read and connect timeouts for wget, + so that wget will give up and timeout, through the -T + command line option. + + Currently only connect and network data read timeout are + supported (i.e., timeout is not applied to the DNS query). When + FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option + will work in addition to -T. config BUSYBOX_CONFIG_ZCIP bool "zcip" diff --git a/package/utils/busybox/config/networking/udhcp/Config.in b/package/utils/busybox/config/networking/udhcp/Config.in index 64731f1..576a01a 100644 --- a/package/utils/busybox/config/networking/udhcp/Config.in +++ b/package/utils/busybox/config/networking/udhcp/Config.in @@ -4,7 +4,12 @@ # see scripts/kbuild/config-language.txt. # - +config BUSYBOX_CONFIG_UDHCPC6 + bool "udhcp client for DHCPv6 (udhcpc6)" + default BUSYBOX_DEFAULT_UDHCPC6 # not yet ready + depends on BUSYBOX_CONFIG_FEATURE_IPV6 + help + udhcpc6 is a DHCPv6 client config BUSYBOX_CONFIG_UDHCPD bool "udhcp server (udhcpd)" diff --git a/package/utils/busybox/config/printutils/Config.in b/package/utils/busybox/config/printutils/Config.in index d22e4e9..cccc4a5 100644 --- a/package/utils/busybox/config/printutils/Config.in +++ b/package/utils/busybox/config/printutils/Config.in @@ -7,7 +7,6 @@ menu "Print Utilities" - config BUSYBOX_CONFIG_LPD bool "lpd" default BUSYBOX_DEFAULT_LPD diff --git a/package/utils/busybox/config/procps/Config.in b/package/utils/busybox/config/procps/Config.in index e9c68d9..6eafbda 100644 --- a/package/utils/busybox/config/procps/Config.in +++ b/package/utils/busybox/config/procps/Config.in @@ -11,6 +11,12 @@ config BUSYBOX_CONFIG_IOSTAT default BUSYBOX_DEFAULT_IOSTAT help Report CPU and I/O statistics +config BUSYBOX_CONFIG_LSOF + bool "lsof" + default BUSYBOX_DEFAULT_LSOF + help + Show open files in the format of: + PID /path/to/executable /path/to/opened/file config BUSYBOX_CONFIG_MPSTAT bool "mpstat" default BUSYBOX_DEFAULT_MPSTAT @@ -47,6 +53,59 @@ config BUSYBOX_CONFIG_SMEMCAP help smemcap is a tool for capturing process data for smem, a memory usage statistic tool. +config BUSYBOX_CONFIG_TOP + bool "top" + default BUSYBOX_DEFAULT_TOP + help + The top program provides a dynamic real-time view of a running + system. + +config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE + bool "Show CPU per-process usage percentage" + default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE + depends on BUSYBOX_CONFIG_TOP + help + Make top display CPU usage for each process. + This adds about 2k. + +config BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS + bool "Show CPU global usage percentage" + default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_GLOBAL_PERCENTS + depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE + help + Makes top display "CPU: NN% usr NN% sys..." line. + This adds about 0.5k. + +config BUSYBOX_CONFIG_FEATURE_TOP_SMP_CPU + bool "SMP CPU usage display ('c' key)" + default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_CPU + depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS + help + Allow 'c' key to switch between individual/cumulative CPU stats + This adds about 0.5k. + +config BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS + bool "Show 1/10th of a percent in CPU/mem statistics" + default BUSYBOX_DEFAULT_FEATURE_TOP_DECIMALS + depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE + help + Show 1/10th of a percent in CPU/mem statistics. + This adds about 0.3k. + +config BUSYBOX_CONFIG_FEATURE_TOP_SMP_PROCESS + bool "Show CPU process runs on ('j' field)" + default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_PROCESS + depends on BUSYBOX_CONFIG_TOP + help + Show CPU where process was last found running on. + This is the 'j' field. + +config BUSYBOX_CONFIG_FEATURE_TOPMEM + bool "Topmem command ('s' key)" + default BUSYBOX_DEFAULT_FEATURE_TOPMEM + depends on BUSYBOX_CONFIG_TOP + help + Enable 's' in top (gives lots of memory info). config BUSYBOX_CONFIG_UPTIME bool "uptime" default BUSYBOX_DEFAULT_UPTIME @@ -146,12 +205,20 @@ config BUSYBOX_CONFIG_PS config BUSYBOX_CONFIG_FEATURE_PS_WIDE bool "Enable wide output option (-w)" default BUSYBOX_DEFAULT_FEATURE_PS_WIDE - depends on BUSYBOX_CONFIG_PS + depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP help Support argument 'w' for wide output. If given once, 132 chars are printed, and if given more than once, the length is unlimited. +config BUSYBOX_CONFIG_FEATURE_PS_LONG + bool "Enable long output option (-l)" + default BUSYBOX_DEFAULT_FEATURE_PS_LONG + depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP + help + Support argument 'l' for long output. + Adds fields PPID, RSS, START, TIME & TTY + config BUSYBOX_CONFIG_FEATURE_PS_TIME bool "Enable time and elapsed time output" default BUSYBOX_DEFAULT_FEATURE_PS_TIME @@ -188,60 +255,6 @@ config BUSYBOX_CONFIG_BB_SYSCTL help Configure kernel parameters at runtime. -config BUSYBOX_CONFIG_TOP - bool "top" - default BUSYBOX_DEFAULT_TOP - help - The top program provides a dynamic real-time view of a running - system. - -config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE - bool "Show CPU per-process usage percentage" - default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE - depends on BUSYBOX_CONFIG_TOP - help - Make top display CPU usage for each process. - This adds about 2k. - -config BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS - bool "Show CPU global usage percentage" - default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_GLOBAL_PERCENTS - depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE - help - Makes top display "CPU: NN% usr NN% sys..." line. - This adds about 0.5k. - -config BUSYBOX_CONFIG_FEATURE_TOP_SMP_CPU - bool "SMP CPU usage display ('c' key)" - default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_CPU - depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS - help - Allow 'c' key to switch between individual/cumulative CPU stats - This adds about 0.5k. - -config BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS - bool "Show 1/10th of a percent in CPU/mem statistics" - default BUSYBOX_DEFAULT_FEATURE_TOP_DECIMALS - depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE - help - Show 1/10th of a percent in CPU/mem statistics. - This adds about 0.3k. - -config BUSYBOX_CONFIG_FEATURE_TOP_SMP_PROCESS - bool "Show CPU process runs on ('j' field)" - default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_PROCESS - depends on BUSYBOX_CONFIG_TOP - help - Show CPU where process was last found running on. - This is the 'j' field. - -config BUSYBOX_CONFIG_FEATURE_TOPMEM - bool "Topmem command ('s' key)" - default BUSYBOX_DEFAULT_FEATURE_TOPMEM - depends on BUSYBOX_CONFIG_TOP - help - Enable 's' in top (gives lots of memory info). - config BUSYBOX_CONFIG_FEATURE_SHOW_THREADS bool "Support for showing threads in ps/pstree/top" default BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS diff --git a/package/utils/busybox/config/runit/Config.in b/package/utils/busybox/config/runit/Config.in index 8d0e07b..8074fb1 100644 --- a/package/utils/busybox/config/runit/Config.in +++ b/package/utils/busybox/config/runit/Config.in @@ -7,7 +7,6 @@ menu "Runit Utilities" - config BUSYBOX_CONFIG_RUNSV bool "runsv" default BUSYBOX_DEFAULT_RUNSV diff --git a/package/utils/busybox/config/selinux/Config.in b/package/utils/busybox/config/selinux/Config.in index 7597bb5..3340e4b 100644 --- a/package/utils/busybox/config/selinux/Config.in +++ b/package/utils/busybox/config/selinux/Config.in @@ -8,7 +8,6 @@ menu "SELinux Utilities" depends on BUSYBOX_CONFIG_SELINUX - config BUSYBOX_CONFIG_CHCON bool "chcon" default BUSYBOX_DEFAULT_CHCON diff --git a/package/utils/busybox/config/shell/Config.in b/package/utils/busybox/config/shell/Config.in index 594675a..c375f0c 100644 --- a/package/utils/busybox/config/shell/Config.in +++ b/package/utils/busybox/config/shell/Config.in @@ -156,6 +156,9 @@ config BUSYBOX_CONFIG_CTTYHACK # exec setsid sh -c 'exec sh /dev/tty1 2>&1' + Starting getty on a controlling tty from a shell script: + + # getty 115200 $(cttyhack) config BUSYBOX_CONFIG_HUSH bool "hush" default BUSYBOX_DEFAULT_HUSH @@ -292,6 +295,7 @@ config BUSYBOX_CONFIG_MSH msh is deprecated and will be removed, please migrate to hush. + choice prompt "Choose which shell is aliased to 'sh' name" default BUSYBOX_CONFIG_FEATURE_SH_IS_ASH diff --git a/package/utils/busybox/config/sysklogd/Config.in b/package/utils/busybox/config/sysklogd/Config.in index fe08eb2..de36a1e 100644 --- a/package/utils/busybox/config/sysklogd/Config.in +++ b/package/utils/busybox/config/sysklogd/Config.in @@ -7,7 +7,6 @@ menu "System Logging Utilities" - config BUSYBOX_CONFIG_SYSLOGD bool "syslogd" default BUSYBOX_DEFAULT_SYSLOGD @@ -114,6 +113,19 @@ config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING from circular buffer, minimizing semaphore contention at some minor memory expense. +config BUSYBOX_CONFIG_FEATURE_KMSG_SYSLOG + bool "Linux kernel printk buffer support" + default BUSYBOX_DEFAULT_FEATURE_KMSG_SYSLOG + depends on BUSYBOX_CONFIG_SYSLOGD + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + When you enable this feature, the syslogd utility will + write system log message to the Linux kernel's printk buffer. + This can be used as a smaller alternative to the syslogd IPC + support, as klogd and logread aren't needed. + + NOTICE: Syslog facilities in log entries needs kernel 3.5+. + config BUSYBOX_CONFIG_KLOGD bool "klogd" default BUSYBOX_DEFAULT_KLOGD @@ -124,6 +136,9 @@ config BUSYBOX_CONFIG_KLOGD you wish to record the messages produced by the kernel, you should enable this option. +comment "klogd should not be used together with syslog to kernel printk buffer" + depends on BUSYBOX_CONFIG_KLOGD && BUSYBOX_CONFIG_FEATURE_KMSG_SYSLOG + config BUSYBOX_CONFIG_FEATURE_KLOGD_KLOGCTL bool "Use the klogctl() interface" default BUSYBOX_DEFAULT_FEATURE_KLOGD_KLOGCTL diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in index 66751db..f78234d 100644 --- a/package/utils/busybox/config/util-linux/Config.in +++ b/package/utils/busybox/config/util-linux/Config.in @@ -11,6 +11,69 @@ config BUSYBOX_CONFIG_BLOCKDEV default BUSYBOX_DEFAULT_BLOCKDEV help Performs some ioctls with block devices. +config BUSYBOX_CONFIG_FSTRIM + bool "fstrim" + default BUSYBOX_DEFAULT_FSTRIM + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Discard unused blocks on a mounted filesystem. +config BUSYBOX_CONFIG_MDEV + bool "mdev" + default BUSYBOX_DEFAULT_MDEV + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + mdev is a mini-udev implementation for dynamically creating device + nodes in the /dev directory. + + For more information, please see docs/mdev.txt + +config BUSYBOX_CONFIG_FEATURE_MDEV_CONF + bool "Support /etc/mdev.conf" + default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF + depends on BUSYBOX_CONFIG_MDEV + help + Add support for the mdev config file to control ownership and + permissions of the device nodes. + + For more information, please see docs/mdev.txt + +config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME + bool "Support subdirs/symlinks" + default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME + depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF + help + Add support for renaming devices and creating symlinks. + + For more information, please see docs/mdev.txt + +config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP + bool "Support regular expressions substitutions when renaming device" + default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP + depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME + help + Add support for regular expressions substitutions when renaming + device. + +config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC + bool "Support command execution at device addition/removal" + default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC + depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF + help + This adds support for an optional field to /etc/mdev.conf for + executing commands when devices are created/removed. + + For more information, please see docs/mdev.txt + +config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE + bool "Support loading of firmwares" + default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE + depends on BUSYBOX_CONFIG_MDEV + help + Some devices need to load firmware before they can be usable. + + These devices will request userspace look up the files in + /lib/firmware/ and if it exists, send it to the kernel for + loading into the hardware. config BUSYBOX_CONFIG_REV bool "rev" default BUSYBOX_DEFAULT_REV @@ -414,64 +477,6 @@ config BUSYBOX_CONFIG_LSUSB This version uses sysfs (/sys/bus/usb/devices) only. -config BUSYBOX_CONFIG_MDEV - bool "mdev" - default BUSYBOX_DEFAULT_MDEV - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - mdev is a mini-udev implementation for dynamically creating device - nodes in the /dev directory. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_CONF - bool "Support /etc/mdev.conf" - default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF - depends on BUSYBOX_CONFIG_MDEV - help - Add support for the mdev config file to control ownership and - permissions of the device nodes. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME - bool "Support subdirs/symlinks" - default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME - depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF - help - Add support for renaming devices and creating symlinks. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP - bool "Support regular expressions substitutions when renaming device" - default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP - depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME - help - Add support for regular expressions substitutions when renaming - device. - -config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC - bool "Support command execution at device addition/removal" - default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC - depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF - help - This adds support for an optional field to /etc/mdev.conf for - executing commands when devices are created/removed. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE - bool "Support loading of firmwares" - default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE - depends on BUSYBOX_CONFIG_MDEV - help - Some devices need to load firmware before they can be usable. - - These devices will request userspace look up the files in - /lib/firmware/ and if it exists, send it to the kernel for - loading into the hardware. - config BUSYBOX_CONFIG_MKSWAP bool "mkswap" default BUSYBOX_DEFAULT_MKSWAP @@ -553,13 +558,18 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL This also enables label or uuid support for swapon. config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS - bool "Support mounting NFS file systems" + bool "Support mounting NFS file systems on Linux < 2.6.23" default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS depends on BUSYBOX_CONFIG_MOUNT select BUSYBOX_CONFIG_FEATURE_HAVE_RPC select BUSYBOX_CONFIG_FEATURE_SYSLOG help - Enable mounting of NFS file systems. + Enable mounting of NFS file systems on Linux kernels prior + to version 2.6.23. Note that in this case mounting of NFS + over IPv6 will not be possible. + + Note that this option links in RPC support from libc, + which is rather large (~10 kbytes on uclibc). config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS bool "Support mounting CIFS/SMB file systems" @@ -762,224 +772,6 @@ config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT About the only reason to use this is if you've removed /proc from your kernel. -config BUSYBOX_CONFIG_VOLUMEID - bool #No description makes it a hidden option - default BUSYBOX_DEFAULT_VOLUMEID - -menu "Filesystem/Volume identification" - depends on BUSYBOX_CONFIG_VOLUMEID - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT - bool "Ext filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS - bool "btrfs filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BTRFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS - bool "Reiser filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_REISERFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT - bool "fat filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS - bool "hfs filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_HFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS - bool "jfs filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_UFS -### bool "ufs filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS - bool "xfs filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_XFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS - bool "ntfs filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660 - bool "iso9660 filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ISO9660 - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF - bool "udf filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS - bool "luks filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP - bool "linux swap filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXSWAP - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_LVM -### bool "lvm" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS - bool "cramfs filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_HPFS -### bool "hpfs filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS - bool "romfs filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ROMFS - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV - bool "sysv filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_MINIX -### bool "minix filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -### These only detect partition tables - not used (yet?) -### config FEATURE_VOLUMEID_MAC -### bool "mac filesystem" -### default y -### depends on VOLUMEID -### help -### TODO -### -### config FEATURE_VOLUMEID_MSDOS -### bool "msdos filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2 - bool "ocfs2 filesystem" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_OCFS2 - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_HIGHPOINTRAID -### bool "highpoint raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_ISWRAID -### bool "intel raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_LSIRAID -### bool "lsi raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_VIARAID -### bool "via raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_SILICONRAID -### bool "silicon raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_NVIDIARAID -### bool "nvidia raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_PROMISERAID -### bool "promise raid" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID - bool "linuxraid" - default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -endmenu +source package/utils/busybox/config/util-linux/volume_id/Config.in endmenu diff --git a/package/utils/busybox/config/util-linux/volume_id/Config.in b/package/utils/busybox/config/util-linux/volume_id/Config.in new file mode 100644 index 0000000..306550b --- /dev/null +++ b/package/utils/busybox/config/util-linux/volume_id/Config.in @@ -0,0 +1,304 @@ +# DO NOT EDIT. This file is generated from Config.src +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +config BUSYBOX_CONFIG_VOLUMEID + bool #No description makes it a hidden option + default BUSYBOX_DEFAULT_VOLUMEID + +menu "Filesystem/Volume identification" + depends on BUSYBOX_CONFIG_VOLUMEID + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS + bool "btrfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BTRFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS + bool "cramfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXFAT + bool "exFAT filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXFAT + depends on BUSYBOX_CONFIG_VOLUMEID + help + exFAT (extended FAT) is a proprietary file system designed especially + for flash drives. It has many features from NTFS, but with less + overhead. exFAT is used on most SDXC cards for consumer electronics. + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT + bool "Ext filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_F2FS + bool "f2fs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_F2FS + depends on BUSYBOX_CONFIG_VOLUMEID + help + F2FS (aka Flash-Friendly File System) is a log-structured file system, + which is adapted to newer forms of storage. F2FS also remedies some + known issues of the older log structured file systems, such as high + cleaning overhead. + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT + bool "fat filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS + bool "hfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_HFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660 + bool "iso9660 filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ISO9660 + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS + bool "jfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID + bool "linuxraid" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP + bool "linux swap filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXSWAP + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS + bool "luks filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NILFS + bool "nilfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NILFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + NILFS is a New Implementation of a Log-Structured File System (LFS) + that supports continuous snapshots. This provides features like + versioning of the entire filesystem, restoration of files that + were deleted a few minutes ago. NILFS keeps consistency like + conventional LFS, so it provides quick recovery after system crashes. + + The possible use of NILFS includes versioning, tamper detection, + SOX compliance logging, and so forth. It can serve as an alternative + filesystem for Linux desktop environment, or as a basis of advanced + storage appliances. + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS + bool "ntfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2 + bool "ocfs2 filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_OCFS2 + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS + bool "Reiser filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_REISERFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS + bool "romfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ROMFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS + bool "SquashFS filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SQUASHFS + depends on BUSYBOX_CONFIG_VOLUMEID && BUSYBOX_CONFIG_FEATURE_BLKID_TYPE + help + Squashfs is a compressed read-only filesystem for Linux. Squashfs is + intended for general read-only filesystem use and in constrained block + device/memory systems (e.g. embedded systems) where low overhead is + needed. + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV + bool "sysv filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF + bool "udf filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +### config FEATURE_VOLUMEID_HIGHPOINTRAID +### bool "highpoint raid" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_HPFS +### bool "hpfs filesystem" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_ISWRAID +### bool "intel raid" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_LSIRAID +### bool "lsi raid" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_LVM +### bool "lvm" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_MAC +### bool "mac filesystem" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_MINIX +### bool "minix filesystem" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_MSDOS +### bool "msdos filesystem" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_NVIDIARAID +### bool "nvidia raid" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_PROMISERAID +### bool "promise raid" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_SILICONRAID +### bool "silicon raid" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_UFS +### bool "ufs filesystem" +### default y +### depends on VOLUMEID +### help +### TODO + + +### config FEATURE_VOLUMEID_VIARAID +### bool "via raid" +### default y +### depends on VOLUMEID +### help +### TODO + + +config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS + bool "xfs filesystem" + default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_XFS + depends on BUSYBOX_CONFIG_VOLUMEID + help + TODO + + +endmenu -- cgit v1.1