From 59a06c71cbf7ee5ecb453bbb2e9d4c2df6f194ed Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 22 Nov 2006 23:30:57 +0000
Subject: rename default/ to files/

SVN-Revision: 5622
---
 package/base-files/Makefile                        |   2 +-
 package/base-files/default/bin/ipcalc              |  32 ----
 package/base-files/default/bin/login               |  18 ---
 package/base-files/default/bin/uci                 | 178 ---------------------
 package/base-files/default/etc/banner              |  10 --
 package/base-files/default/etc/config/network      |  13 --
 package/base-files/default/etc/functions.sh        | 149 -----------------
 package/base-files/default/etc/group               |   2 -
 package/base-files/default/etc/hosts               |   1 -
 .../default/etc/hotplug.d/block/01-mount           |  26 ---
 .../base-files/default/etc/hotplug.d/net/10-net    |  35 ----
 package/base-files/default/etc/hotplug.d/usb/01-ln |  33 ----
 package/base-files/default/etc/init.d/boot         |  26 ---
 package/base-files/default/etc/init.d/network      |  14 --
 package/base-files/default/etc/init.d/rcS          |  19 ---
 package/base-files/default/etc/inittab             |   3 -
 package/base-files/default/etc/ipkg.conf           |   3 -
 package/base-files/default/etc/passwd              |   2 -
 package/base-files/default/etc/profile             |  12 --
 package/base-files/default/etc/protocols           |  56 -------
 package/base-files/default/etc/rc.common           |  83 ----------
 package/base-files/default/etc/resolv.conf         |   2 -
 package/base-files/default/etc/shells              |   1 -
 package/base-files/default/etc/sysctl.conf         |  12 --
 package/base-files/default/lib/config/template.awk |  42 -----
 .../base-files/default/lib/config/uci-update.awk   | 160 ------------------
 package/base-files/default/lib/config/uci.sh       | 139 ----------------
 package/base-files/default/lib/network/config.sh   | 171 --------------------
 package/base-files/default/rom/note                |   3 -
 package/base-files/default/sbin/hotplug            |  26 ---
 package/base-files/default/sbin/ifdown             |  55 -------
 package/base-files/default/sbin/ifup               |  11 --
 package/base-files/default/sbin/mount_root         |  10 --
 package/base-files/default/sbin/wifi               | 116 --------------
 package/base-files/default/usr/lib/common.awk      |  68 --------
 .../default/usr/share/udhcpc/default.script        |  57 -------
 package/base-files/files/bin/ipcalc                |  32 ++++
 package/base-files/files/bin/login                 |  18 +++
 package/base-files/files/bin/uci                   | 178 +++++++++++++++++++++
 package/base-files/files/etc/banner                |  10 ++
 package/base-files/files/etc/config/network        |  13 ++
 package/base-files/files/etc/functions.sh          | 149 +++++++++++++++++
 package/base-files/files/etc/group                 |   2 +
 package/base-files/files/etc/hosts                 |   1 +
 .../base-files/files/etc/hotplug.d/block/01-mount  |  26 +++
 package/base-files/files/etc/hotplug.d/net/10-net  |  35 ++++
 package/base-files/files/etc/hotplug.d/usb/01-ln   |  33 ++++
 package/base-files/files/etc/init.d/boot           |  26 +++
 package/base-files/files/etc/init.d/network        |  14 ++
 package/base-files/files/etc/init.d/rcS            |  19 +++
 package/base-files/files/etc/inittab               |   3 +
 package/base-files/files/etc/ipkg.conf             |   3 +
 package/base-files/files/etc/passwd                |   2 +
 package/base-files/files/etc/profile               |  12 ++
 package/base-files/files/etc/protocols             |  56 +++++++
 package/base-files/files/etc/rc.common             |  83 ++++++++++
 package/base-files/files/etc/resolv.conf           |   2 +
 package/base-files/files/etc/shells                |   1 +
 package/base-files/files/etc/sysctl.conf           |  12 ++
 package/base-files/files/lib/config/template.awk   |  42 +++++
 package/base-files/files/lib/config/uci-update.awk | 160 ++++++++++++++++++
 package/base-files/files/lib/config/uci.sh         | 139 ++++++++++++++++
 package/base-files/files/lib/network/config.sh     | 171 ++++++++++++++++++++
 package/base-files/files/rom/note                  |   3 +
 package/base-files/files/sbin/hotplug              |  26 +++
 package/base-files/files/sbin/ifdown               |  55 +++++++
 package/base-files/files/sbin/ifup                 |  11 ++
 package/base-files/files/sbin/mount_root           |  10 ++
 package/base-files/files/sbin/wifi                 | 116 ++++++++++++++
 package/base-files/files/usr/lib/common.awk        |  68 ++++++++
 .../files/usr/share/udhcpc/default.script          |  57 +++++++
 71 files changed, 1589 insertions(+), 1589 deletions(-)
 delete mode 100755 package/base-files/default/bin/ipcalc
 delete mode 100755 package/base-files/default/bin/login
 delete mode 100755 package/base-files/default/bin/uci
 delete mode 100644 package/base-files/default/etc/banner
 delete mode 100644 package/base-files/default/etc/config/network
 delete mode 100755 package/base-files/default/etc/functions.sh
 delete mode 100644 package/base-files/default/etc/group
 delete mode 100644 package/base-files/default/etc/hosts
 delete mode 100755 package/base-files/default/etc/hotplug.d/block/01-mount
 delete mode 100644 package/base-files/default/etc/hotplug.d/net/10-net
 delete mode 100755 package/base-files/default/etc/hotplug.d/usb/01-ln
 delete mode 100755 package/base-files/default/etc/init.d/boot
 delete mode 100755 package/base-files/default/etc/init.d/network
 delete mode 100755 package/base-files/default/etc/init.d/rcS
 delete mode 100644 package/base-files/default/etc/inittab
 delete mode 100644 package/base-files/default/etc/ipkg.conf
 delete mode 100644 package/base-files/default/etc/passwd
 delete mode 100644 package/base-files/default/etc/profile
 delete mode 100644 package/base-files/default/etc/protocols
 delete mode 100755 package/base-files/default/etc/rc.common
 delete mode 100644 package/base-files/default/etc/resolv.conf
 delete mode 100644 package/base-files/default/etc/shells
 delete mode 100644 package/base-files/default/etc/sysctl.conf
 delete mode 100644 package/base-files/default/lib/config/template.awk
 delete mode 100644 package/base-files/default/lib/config/uci-update.awk
 delete mode 100755 package/base-files/default/lib/config/uci.sh
 delete mode 100755 package/base-files/default/lib/network/config.sh
 delete mode 100644 package/base-files/default/rom/note
 delete mode 100755 package/base-files/default/sbin/hotplug
 delete mode 100755 package/base-files/default/sbin/ifdown
 delete mode 100755 package/base-files/default/sbin/ifup
 delete mode 100755 package/base-files/default/sbin/mount_root
 delete mode 100755 package/base-files/default/sbin/wifi
 delete mode 100644 package/base-files/default/usr/lib/common.awk
 delete mode 100755 package/base-files/default/usr/share/udhcpc/default.script
 create mode 100755 package/base-files/files/bin/ipcalc
 create mode 100755 package/base-files/files/bin/login
 create mode 100755 package/base-files/files/bin/uci
 create mode 100644 package/base-files/files/etc/banner
 create mode 100644 package/base-files/files/etc/config/network
 create mode 100755 package/base-files/files/etc/functions.sh
 create mode 100644 package/base-files/files/etc/group
 create mode 100644 package/base-files/files/etc/hosts
 create mode 100755 package/base-files/files/etc/hotplug.d/block/01-mount
 create mode 100644 package/base-files/files/etc/hotplug.d/net/10-net
 create mode 100755 package/base-files/files/etc/hotplug.d/usb/01-ln
 create mode 100755 package/base-files/files/etc/init.d/boot
 create mode 100755 package/base-files/files/etc/init.d/network
 create mode 100755 package/base-files/files/etc/init.d/rcS
 create mode 100644 package/base-files/files/etc/inittab
 create mode 100644 package/base-files/files/etc/ipkg.conf
 create mode 100644 package/base-files/files/etc/passwd
 create mode 100644 package/base-files/files/etc/profile
 create mode 100644 package/base-files/files/etc/protocols
 create mode 100755 package/base-files/files/etc/rc.common
 create mode 100644 package/base-files/files/etc/resolv.conf
 create mode 100644 package/base-files/files/etc/shells
 create mode 100644 package/base-files/files/etc/sysctl.conf
 create mode 100644 package/base-files/files/lib/config/template.awk
 create mode 100644 package/base-files/files/lib/config/uci-update.awk
 create mode 100755 package/base-files/files/lib/config/uci.sh
 create mode 100755 package/base-files/files/lib/network/config.sh
 create mode 100644 package/base-files/files/rom/note
 create mode 100755 package/base-files/files/sbin/hotplug
 create mode 100755 package/base-files/files/sbin/ifdown
 create mode 100755 package/base-files/files/sbin/ifup
 create mode 100755 package/base-files/files/sbin/mount_root
 create mode 100755 package/base-files/files/sbin/wifi
 create mode 100644 package/base-files/files/usr/lib/common.awk
 create mode 100755 package/base-files/files/usr/share/udhcpc/default.script

(limited to 'package')

diff --git a/package/base-files/Makefile b/package/base-files/Makefile
index 04a63b7..62859294 100644
--- a/package/base-files/Makefile
+++ b/package/base-files/Makefile
@@ -94,7 +94,7 @@ define Build/Compile
 endef
 
 define Package/base-files$(TARGET)/install
-	$(CP) ./default/* $(1)/
+	$(CP) ./files/* $(1)/
 	if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
 		$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
 	fi
diff --git a/package/base-files/default/bin/ipcalc b/package/base-files/default/bin/ipcalc
deleted file mode 100755
index e8efa6b..0000000
--- a/package/base-files/default/bin/ipcalc
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-awk -f /usr/lib/common.awk -f - $* <<EOF
-BEGIN {
-	ipaddr=ip2int(ARGV[1])
-	netmask=ip2int(ARGV[2])
-	network=and(ipaddr,netmask)
-	broadcast=or(network,compl(netmask))
-	
-	start=or(network,and(ip2int(ARGV[3]),compl(netmask)))
-	limit=network+1
-	if (start<limit) start=limit
-	
-	end=start+ARGV[4]
-	limit=or(network,compl(netmask))-1
-	if (end>limit) end=limit
-
-	print "IP="int2ip(ipaddr)
-	print "NETMASK="int2ip(netmask)
-	print "BROADCAST="int2ip(broadcast)
-	print "NETWORK="int2ip(network)
-	print "PREFIX="32-bitcount(compl(netmask))
-	
-	# range calculations:
-	# ipcalc <ip> <netmask> <start> <num>
-	
-	if (ARGC > 3) {
-		print "START="int2ip(start)
-		print "END="int2ip(end-1)
-	}
-}
-EOF
diff --git a/package/base-files/default/bin/login b/package/base-files/default/bin/login
deleted file mode 100755
index ff5d366..0000000
--- a/package/base-files/default/bin/login
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-grep '^root:[^!]' /etc/passwd >&- 2>&-
-[ "$?" = "0" -a -z "$FAILSAFE" ]  &&  
-{
-    echo "Login failed."
-    exit 0
-} || {
-cat << EOF
- === IMPORTANT ============================
-  Use 'passwd' to set your login password
-  this will disable telnet and enable SSH
- ------------------------------------------
-EOF
-}
-
-exec /bin/ash --login
diff --git a/package/base-files/default/bin/uci b/package/base-files/default/bin/uci
deleted file mode 100755
index 9b50380..0000000
--- a/package/base-files/default/bin/uci
+++ /dev/null
@@ -1,178 +0,0 @@
-#!/bin/sh
-# Shell script for interacting with config files
-#
-# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
-# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-. /etc/functions.sh
-include /lib/config
-
-SEP="[^0-9A-Za-z_]"
-
-do_get() {
-	local PACKAGE
-	local CONFIG
-	local OPTION
-	local DUMMY
-
-	strtok "$*" PACKAGE . CONFIG . OPTION $SEP DUMMY
-
-	[ $? -ne 3 ] && {
-		uci_usage get
-		exit 1
-	}
-
-	uci_load "$PACKAGE"
-	config_get "$CONFIG" "$OPTION"
-}
-
-do_set() {
-	local PACKAGE
-	local CONFIG
-	local OPTION
-	local VALUE
-
-	strtok "$1" PACKAGE . CONFIG = VALUE
-	[ $? -ne 3 ] && {
-		uci_usage set
-		exit 1
-	}
-	
-	strtok "$CONFIG" CONFIG . OPTION
-	
-	if [ $? -eq 1 ]; then
-		uci_add "$PACKAGE" "$VALUE" "$CONFIG"
-	else
-		uci_set "$PACKAGE" "$CONFIG" "$OPTION" "$VALUE"
-	fi
-}
-
-do_rename() {
-	[ $# -ne 3 ] && {
-		uci_usage rename
-		exit 1
-	}
-	uci_rename "$@"
-}
-
-do_remove() {
-	local PACKAGE
-	local CONFIG
-	local OPTION
-	local DUMMY
-
-	strtok "$*" PACKAGE . CONFIG . OPTION $SEP DUMMY
-	[ $? -ne 3 -a $? -ne 2 ] && {
-		uci_usage rename
-		exit 1
-	}
-	uci_remove "$PACKAGE" "$CONFIG" ${OPTION:+"$OPTION"}
-}
-
-do_commit() {
-	local PACKAGE="$1"
-	for package in ${PACKAGE:-$(cd /tmp/.uci; ls)}; do 
-		uci_commit "$package"
-	done
-}
-
-do_show() {
-	local PACKAGE
-	local CONFIG
-	local DUMMY
-
-	strtok "$*" PACKAGE . CONFIG $SEP DUMMY
-	[ $? -gt 2 ] && {
-		uci_usage show
-		exit 1
-	}
-	
-	for package in ${PACKAGE:-$(cd /etc/config; ls)}; do
-		SECTION=""
-	
-		config_cb() {
-			if [ -z "$CONFIG" -o "$CONFIG" = "$2" ]; then
-				append SECTION "$2"
-				option_cb() {
-					append "${CONFIG_SECTION}_VARS" "$1"
-				}
-			else
-				option_cb() {
-					return 0
-				}
-			fi
-		}
-			
-		uci_load "$package"
-	
-		for section in $SECTION; do
-			config_get type "$section" TYPE
-			[ -z "$type" ] && continue
-			echo "$package.$section=$type"
-			eval "VARS=\"\${${section}_VARS}\""
-			for var in $VARS; do
-				config_get val "$section" "$var"
-				[ -n "$val" ] && {
-					echo "$package.$section.$var=$val"
-					config_set "$section" "$var" ""
-				}
-			done
-			config_set "$section" TYPE ""
-		done
-	done
-}
-
-uci_usage() {
-	case "$1" in
-		show) echo "$0 show [<package>[.<config>]]";;
-		get) echo "$0 get <package>.<config>.<option>";;
-		set) echo "$0 set <package>.<config>[.<option>]=<value>";;
-		del) echo "$0 del <package>.<config>[.<option>]";;
-		rename) echo "$0 rename <package> <config> <name>";;
-		commit) echo "$0 commit [<package> ... ]";;
-		*) 
-			echo "Syntax: $0 <command> <arguments...>"
-			echo
-			uci_usage show
-			uci_usage get
-			uci_usage set
-			uci_usage del
-			uci_usage rename
-			uci_usage commit
-			echo
-			exit 1
-		;;
-	esac
-}
-
-if [ $# -eq 0 ] ; then
-	uci_usage
-	exit 0
-fi
-
-local CMD="$1"
-shift
-case "$CMD" in
-	set) do_set "$@";;
-	del) do_remove "$@";;
-	rename) do_rename "$@";;
-	get) do_get "$@";;
-	show) do_show "$@";;
-	commit) do_commit "$@";;
-	*) uci_usage;;
-esac
-exit 0
diff --git a/package/base-files/default/etc/banner b/package/base-files/default/etc/banner
deleted file mode 100644
index c2fbc12..0000000
--- a/package/base-files/default/etc/banner
+++ /dev/null
@@ -1,10 +0,0 @@
-  _______                     ________        __
- |       |.-----.-----.-----.|  |  |  |.----.|  |_
- |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
- |_______||   __|_____|__|__||________||__|  |____|
-          |__| W I R E L E S S   F R E E D O M
- KAMIKAZE (bleeding edge, $R) -------------------
-  * 10 oz Vodka       Shake well with ice and strain
-  * 10 oz Triple sec  mixture into 10 shot glasses.
-  * 10 oz lime juice  Salute!
- ---------------------------------------------------
diff --git a/package/base-files/default/etc/config/network b/package/base-files/default/etc/config/network
deleted file mode 100644
index 1d5ded3..0000000
--- a/package/base-files/default/etc/config/network
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	eth0
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
diff --git a/package/base-files/default/etc/functions.sh b/package/base-files/default/etc/functions.sh
deleted file mode 100755
index bf412df..0000000
--- a/package/base-files/default/etc/functions.sh
+++ /dev/null
@@ -1,149 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2006 Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
-
-alias debug=${DEBUG:-:}
-
-# newline
-readonly N="
-"
-
-_C=0
-
-hotplug_dev() {
-	env -i ACTION=$1 INTERFACE=$2 /sbin/hotplug net
-}
-
-append() {
-	local var="$1"
-	local value="$2"
-	local sep="${3:- }"
-	
-	eval "export -n -- \"$var=\${$var:+\${$var}\${value:+\$sep}}\$value\""
-}
-
-reset_cb() {
-	config_cb() { return 0; }
-	option_cb() { return 0; }
-}
-reset_cb
-
-config () {
-	local cfgtype="$1"
-	local name="$2"
-    
-	_C=$((_C + 1))
-	name="${name:-cfg${_C}}"
-	config_cb "$cfgtype" "$name"
-	CONFIG_SECTION="$name"
-	export -n "CONFIG_${CONFIG_SECTION}_TYPE=$cfgtype"
-}
-
-option () {
-	local varname="$1"; shift
-	local value="$*"
-	
-	export -n "CONFIG_${CONFIG_SECTION}_${varname}=$value"
-	option_cb "$varname" "$*"
-}
-
-config_rename() {
-	local OLD="$1"
-	local NEW="$2"
-	local oldvar
-	local newvar
-	
-	[ "$OLD" -a "$NEW" ] || return
-	for oldvar in `set | grep ^CONFIG_${OLD}_ | \
-		sed -e 's/\(.*\)=.*$/\1/'` ; do
-		newvar="CONFIG_${NEW}_${oldvar##CONFIG_${OLD}_}"
-		eval "export -n \"$newvar=\${$oldvar}\""
-		unset "$oldvar"
-	done
-	
-	[ "$CONFIG_SECTION" = "$OLD" ] && CONFIG_SECTION="$NEW"
-}
-
-config_unset() {
-	config_set "$1" "$2" ""
-}
-
-config_clear() {
-	local SECTION="$1"
-	local oldvar
-	
-	for oldvar in `set | grep ^CONFIG_${SECTION}_ | \
-		sed -e 's/\(.*\)=.*$/\1/'` ; do 
-		unset $oldvar 
-	done
-}
-
-config_load() {
-	local file="/etc/config/$1"
-	_C=0
-	CONFIG_SECTION=
-	
-	[ -e "$file" ] && {
-		. $file
-	} || return 1
-	
-	${CONFIG_SECTION:+config_cb}
-}
-
-config_get() {
-	case "$3" in
-		"") eval "echo \"\${CONFIG_${1}_${2}}\"";;
-		*)  eval "export -n -- \"$1=\${CONFIG_${2}_${3}}\"";;
-	esac
-}
-
-config_set() {
-	local section="$1"
-	local option="$2"
-	local value="$3"
-	export -n "CONFIG_${section}_${option}=$value"
-}
-
-load_modules() {
-	sed 's/^[^#]/insmod &/' $* | ash 2>&- || :
-}
-
-include() {
-	local file
-	
-	for file in $(ls $1/*.sh 2>/dev/null); do
-		. $file
-	done
-}
-
-find_mtd_part() {
-	local PART="$(grep "\"$1\"" /proc/mtd | awk -F: '{print $1}')"
-	
-	PART="${PART##mtd}"
-	echo "${PART:+/dev/mtdblock/$PART}"
-}
-
-strtok() { # <string> { <variable> [<separator>] ... }
-	local tmp
-	local val="$1"
-	local count=0
-
-	shift
-
-	while [ $# -gt 1 ]; do
-		tmp="${val%%$2*}"
-
-		[ "$tmp" = "$val" ] && break
-
-		val="${val#$tmp$2}"
-
-		export -n "$1=$tmp"; count=$((count+1))
-		shift 2
-	done
-
-	if [ $# -gt 0 -a "$val" ]; then
-		export -n "$1=$val"; count=$((count+1))
-	fi
-
-	return $count
-}
diff --git a/package/base-files/default/etc/group b/package/base-files/default/etc/group
deleted file mode 100644
index c4e77f3..0000000
--- a/package/base-files/default/etc/group
+++ /dev/null
@@ -1,2 +0,0 @@
-root:x:0:
-nogroup:x:65534:
diff --git a/package/base-files/default/etc/hosts b/package/base-files/default/etc/hosts
deleted file mode 100644
index ce138ec..0000000
--- a/package/base-files/default/etc/hosts
+++ /dev/null
@@ -1 +0,0 @@
-127.0.0.1 localhost OpenWrt
diff --git a/package/base-files/default/etc/hotplug.d/block/01-mount b/package/base-files/default/etc/hotplug.d/block/01-mount
deleted file mode 100755
index db8ccda..0000000
--- a/package/base-files/default/etc/hotplug.d/block/01-mount
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-DEV=${DEVPATH##*/}
-{
-echo "ACTION=$ACTION DEVPATH=$DEVPATH $0 $*"
-case "$ACTION" in
-add)
-	echo -ne "waiting for $DEV"
-	while [ ! -b /dev/$DEV ]; do {
-		echo -ne "."
-		sleep 1
-		time=$((time+1)); [ $time -gt 10 ] && break
-	}; done
-	
-	[ ${DEV%%[0-9]} != ${DEV} ] && {
-		mkdir -p /tmp/$DEV
-		mount /dev/$DEV /tmp/$DEV -t auto -o sync
-	}
-	;;
-remove)
-	umount /tmp/$DEV && rmdir /tmp/$DEV
-	rm -f /dev/$DEV /tmp/$DEV
-	;;
-esac
-} 2>&1 | logger
diff --git a/package/base-files/default/etc/hotplug.d/net/10-net b/package/base-files/default/etc/hotplug.d/net/10-net
deleted file mode 100644
index 9b72338..0000000
--- a/package/base-files/default/etc/hotplug.d/net/10-net
+++ /dev/null
@@ -1,35 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-include /lib/network
-
-addif() {
-	scan_interfaces
-	local cfg="$(find_config "$INTERFACE")"
-
-	# check the autoload setting
-	config_get auto "$cfg" auto
-	case "$auto" in
-		1|on|enabled) setup_interface "$INTERFACE";;
-	esac
-
-
-	# find all vlan configurations for this interface and set them up as well
-	for ifc in $interfaces; do
-		config_get iftype "$ifc" type
-		config_get ifs "$ifc" device
-		for dev in $ifs; do
-			[ "${dev%%\.*}" = "$INTERFACE" -a "$dev" != "$INTERFACE" ] && {
-				add_vlan "$dev"
-			}
-		done
-	done
-}
-
-case "$ACTION" in
-	add|register)
-		case "$PHYSDEVDRIVER" in
-			natsemi) sleep 1;;
-		esac
-		addif
-	;;
-esac
diff --git a/package/base-files/default/etc/hotplug.d/usb/01-ln b/package/base-files/default/etc/hotplug.d/usb/01-ln
deleted file mode 100755
index f9eda02..0000000
--- a/package/base-files/default/etc/hotplug.d/usb/01-ln
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-case "$ACTION" in
-add) 
-	[ -f /sys/${DEVPATH}/idVendor -a "$(cat /sys/${DEVPATH}/idVendor)" -ne "0000" ] && {
-		cd /sys/${DEVPATH}
-
-		NUM=${DEVPATH##*/}
-		HOST=$(find ${NUM}:*/host* -type d)
-		HOST=${HOST##*/host}
-
-		echo -ne "waiting for disk"
-
-		while [ ! -d "/dev/scsi/host${HOST}/bus0/target0/lun0" ]; do {
-			echo -ne "."
-			sleep 1;
-			time=$((time+1)); [ $time -gt 10 ] && break
-		}; done
-		echo
-		
-		cd  /sys/bus/scsi/devices/${HOST}\:0\:0\:0
-		for BLOCK in block:* ; do {
-			cd ${BLOCK}
-			BLOCK=${BLOCK##block\:}
-			ln -sf /dev/scsi/host${HOST}/bus0/target0/lun0/disc /dev/${BLOCK} 
-			for DEV in ${BLOCK}*; do {
-				ln -sf /dev/scsi/host${HOST}/bus0/target0/lun0/part${DEV##$BLOCK} /dev/$DEV
-			}; done
-		}; done
-	} 2>&1 | logger 
-	;;
-esac
diff --git a/package/base-files/default/etc/init.d/boot b/package/base-files/default/etc/init.d/boot
deleted file mode 100755
index c583652..0000000
--- a/package/base-files/default/etc/init.d/boot
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=10
-start() {
-	[ -f /proc/mounts ] || /sbin/mount_root
-	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
-	vconfig set_name_type DEV_PLUS_VID_NO_PAD
-	
-	HOSTNAME=${wan_hostname%%.*}
-	echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
-	
-	mkdir -p /var/run
-	mkdir -p /var/log
-	mkdir -p /var/lock
-	touch /var/log/wtmp
-	touch /var/log/lastlog
-	[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
-	
-	# manually trigger hotplug before loading modules
-	for iface in $(awk -F: '/:/ {print $1}' /proc/net/dev); do
-		/usr/bin/env -i ACTION=add INTERFACE="$iface" /sbin/hotplug net
-	done
-	
-	load_modules /etc/modules.d/*
-}
diff --git a/package/base-files/default/etc/init.d/network b/package/base-files/default/etc/init.d/network
deleted file mode 100755
index 45d5311..0000000
--- a/package/base-files/default/etc/init.d/network
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=40
-start() {
-	setup_switch() { return 0; }
-
-	include /lib/network
-	setup_switch
-	[ -e /etc/config/wireless ] || \
-		/sbin/wifi detect > /etc/config/wireless
-	/sbin/wifi up
-}
-
diff --git a/package/base-files/default/etc/init.d/rcS b/package/base-files/default/etc/init.d/rcS
deleted file mode 100755
index fe21d03..0000000
--- a/package/base-files/default/etc/init.d/rcS
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-${FAILSAFE:+exit}
-
-# FIXME: add logging configuration
-#[ -f /etc/config/network ] && . /etc/config/network
-#eval $(ipcalc "$log_ipaddr")
-#[ "$log_ipaddr" = "$IP" ] || log_ipaddr=""
-syslogd -C 16 #${log_ipaddr:+-L -R $log_ipaddr}
-klogd
-
-(
-	for i in /etc/rc.d/S*; do
-		$i boot 2>&1
-	done 
-	
-	sysctl -p >&-
-) | logger -s -p 6 -t '' &
diff --git a/package/base-files/default/etc/inittab b/package/base-files/default/etc/inittab
deleted file mode 100644
index 39e134c..0000000
--- a/package/base-files/default/etc/inittab
+++ /dev/null
@@ -1,3 +0,0 @@
-::sysinit:/etc/init.d/rcS
-tts/0::askfirst:/bin/ash --login
-#tts/1::askfirst:/bin/ash --login
diff --git a/package/base-files/default/etc/ipkg.conf b/package/base-files/default/etc/ipkg.conf
deleted file mode 100644
index 2931d2c..0000000
--- a/package/base-files/default/etc/ipkg.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-src snapshots http://openwrt.org/downloads/snapshots/$S/packages
-dest root /
-dest ram /tmp
diff --git a/package/base-files/default/etc/passwd b/package/base-files/default/etc/passwd
deleted file mode 100644
index 3b660a0..0000000
--- a/package/base-files/default/etc/passwd
+++ /dev/null
@@ -1,2 +0,0 @@
-root:!:0:0:root:/tmp:/bin/ash
-nobody:*:65534:65534:nobody:/var:/bin/false
diff --git a/package/base-files/default/etc/profile b/package/base-files/default/etc/profile
deleted file mode 100644
index ae514b0..0000000
--- a/package/base-files/default/etc/profile
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-[ -f /etc/banner ] && cat /etc/banner
-
-export PATH=/bin:/sbin:/usr/bin:/usr/sbin
-export PS1='\u@\h:\w\$ '
-
-alias more=less
-[ -x /usr/bin/vim ] || alias vim=vi
-
-arp() { cat /proc/net/arp; }
-ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
-reboot() { ifdown wan 2>&1 >/dev/null ; /sbin/reboot; }
diff --git a/package/base-files/default/etc/protocols b/package/base-files/default/etc/protocols
deleted file mode 100644
index 53fecb6..0000000
--- a/package/base-files/default/etc/protocols
+++ /dev/null
@@ -1,56 +0,0 @@
-# Internet (IP) protocols
-#
-# Updated from http://www.iana.org/assignments/protocol-numbers and other
-# sources.
-# New protocols will be added on request if they have been officially
-# assigned by IANA and are not historical.
-# If you need a huge list of used numbers please install the nmap package.
-
-ip	0	IP		# internet protocol, pseudo protocol number
-#hopopt	0	HOPOPT		# IPv6 Hop-by-Hop Option [RFC1883]
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# Internet Group Management
-ggp	3	GGP		# gateway-gateway protocol
-ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-egp	8	EGP		# exterior gateway protocol
-igp	9	IGP		# any private interior gateway (Cisco)
-pup	12	PUP		# PARC universal packet protocol
-udp	17	UDP		# user datagram protocol
-hmp	20	HMP		# host monitoring protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-rdp	27	RDP		# "reliable datagram" protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4 [RFC905]
-xtp	36	XTP		# Xpress Transfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp 38	IDPR-CMTP	# IDPR Control Message Transport
-ipv6	41	IPv6		# Internet Protocol, version 6
-ipv6-route 43	IPv6-Route	# Routing Header for IPv6
-ipv6-frag 44	IPv6-Frag	# Fragment Header for IPv6
-idrp	45	IDRP		# Inter-Domain Routing Protocol
-rsvp	46	RSVP		# Reservation Protocol
-gre	47	GRE		# General Routing Encapsulation
-esp	50	IPSEC-ESP	# Encap Security Payload [RFC2046]
-ah	51	IPSEC-AH	# Authentication Header [RFC2402]
-skip	57	SKIP		# SKIP
-ipv6-icmp 58	IPv6-ICMP	# ICMP for IPv6
-ipv6-nonxt 59	IPv6-NoNxt	# No Next Header for IPv6
-ipv6-opts 60	IPv6-Opts	# Destination Options for IPv6
-rspf	73	RSPF CPHB	# Radio Shortest Path First (officially CPHB)
-vmtp	81	VMTP		# Versatile Message Transport
-eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-ax.25	93	AX.25		# AX.25 frames
-ipip	94	IPIP		# IP-within-IP Encapsulation Protocol
-etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation [RFC3378]
-encap	98	ENCAP		# Yet Another IP encapsulation [RFC1241]
-#	99			# any private encryption scheme
-pim	103	PIM		# Protocol Independent Multicast
-ipcomp	108	IPCOMP		# IP Payload Compression Protocol
-vrrp	112	VRRP		# Virtual Router Redundancy Protocol
-l2tp	115	L2TP		# Layer Two Tunneling Protocol [RFC2661]
-isis	124	ISIS		# IS-IS over IPv4
-sctp	132	SCTP		# Stream Control Transmission Protocol
-fc	133	FC		# Fibre Channel
-
diff --git a/package/base-files/default/etc/rc.common b/package/base-files/default/etc/rc.common
deleted file mode 100755
index 7180b0f..0000000
--- a/package/base-files/default/etc/rc.common
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-. $IPKG_INSTROOT/etc/functions.sh
-
-START=50
-
-start() {
-	return 0
-}
-
-stop() {
-	return 0
-}
-
-reload() {
-	return 1
-}
-
-restart() {
-	stop
-	start
-}
-
-boot() {
-	start
-}
-
-shutdown() {
-	return 0
-}
-
-disable() {
-	name="$(basename "${initscript}")"
-	rm -f "$IPKG_INSTROOT"/etc/rc.d/S??$name
-}
-
-enable() {
-	name="$(basename "${initscript}")"
-	disable
-	ln -s "/etc/init.d/$name" "$IPKG_INSTROOT/etc/rc.d/S${START}${name##S[0-9][0-9]}"
-}
-
-depends() {
-	return 0
-}
-
-help() {
-	cat <<EOF
-Syntax: $initscript [command]
-
-Available commands:
-	start	Start the service
-	stop	Stop the service
-	restart	Restart the service
-	reload	Reload configuration files (or restart if that fails)
-	enable	Enable service autostart
-	disable	Disable service autostart
-$EXTRA_HELP
-EOF
-}
-
-initscript="$1"
-action="$2"
-
-. "$initscript"
-
-cmds=
-for cmd in $EXTRA_COMMANDS; do
-	cmds="${cmds:+$cmds$N}$cmd) $cmd;;"
-done
-eval "case \"\$action\" in
-	start) start;;
-	stop) stop;;
-	reload) reload || restart;;
-	restart) restart;;
-	boot) boot;;
-	shutdown) shutdown;;
-	enable) enable;;
-	disable) disable;;
-	$cmds
-	*) help;;
-esac"
diff --git a/package/base-files/default/etc/resolv.conf b/package/base-files/default/etc/resolv.conf
deleted file mode 100644
index 9617eac..0000000
--- a/package/base-files/default/etc/resolv.conf
+++ /dev/null
@@ -1,2 +0,0 @@
-nameserver 127.0.0.1
-search lan
diff --git a/package/base-files/default/etc/shells b/package/base-files/default/etc/shells
deleted file mode 100644
index 006aa38..0000000
--- a/package/base-files/default/etc/shells
+++ /dev/null
@@ -1 +0,0 @@
-/bin/ash
diff --git a/package/base-files/default/etc/sysctl.conf b/package/base-files/default/etc/sysctl.conf
deleted file mode 100644
index e60038c..0000000
--- a/package/base-files/default/etc/sysctl.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-kernel.panic=3
-net.ipv4.conf.default.arp_ignore=1
-net.ipv4.conf.all.arp_ignore=1
-net.ipv4.ip_forward=1
-net.ipv4.icmp_echo_ignore_broadcasts=1
-net.ipv4.icmp_ignore_bogus_error_responses=1
-net.ipv4.tcp_fin_timeout=30
-net.ipv4.tcp_keepalive_time=120
-net.ipv4.tcp_syncookies=1
-net.ipv4.tcp_timestamps=0
-net.ipv4.ip_conntrack_tcp_timeouts="300 43200 120 60 120 120 10 60 30 120"
-net.ipv4.ip_conntrack_udp_timeouts="60 180"
diff --git a/package/base-files/default/lib/config/template.awk b/package/base-files/default/lib/config/template.awk
deleted file mode 100644
index faae8b3..0000000
--- a/package/base-files/default/lib/config/template.awk
+++ /dev/null
@@ -1,42 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-{
-	line=$0
-	gsub(/^[ \t]*/, "")
-	gsub(/[ \t]*$/, "")
-}
-
-$1 == "@define" {
-	v[$2] = $3
-}
-
-$1 == "@ifdef" {
-	if_open = 1
-	if (v[$2] != "") noprint = 0
-	else noprint = 1
-}
-
-$1 == "@ifndef" {
-	if_open = 1
-	if (v[$2] != "") noprint = 1
-	else noprint = 0
-}
-
-$1 == "@else" {
-	if (noprint == 1) noprint = 0
-	else noprint = 1
-}
-
-($1 !~ /^@[a-zA-Z0-9_]/) && (noprint != 1) {
-	n=split(line "@@", a, /@@/)
-	for (i=1; i<=n; i++) {
-		if ((i % 2) == 1) printf "%s" a[i]
-		else printf "%s" v[a[i]]
-	}
-	print ""
-}
-
-$1 == "@endif" {
-	if_open = 0
-	noprint = 0
-}
diff --git a/package/base-files/default/lib/config/uci-update.awk b/package/base-files/default/lib/config/uci-update.awk
deleted file mode 100644
index efa8758..0000000
--- a/package/base-files/default/lib/config/uci-update.awk
+++ /dev/null
@@ -1,160 +0,0 @@
-# Configuration update functions
-#
-# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
-# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-
-function read_file(filename,  result) {
-	while ((getline <filename) == 1) {
-		result = result $0 "\n"
-	}
-	gsub(/\n*$/, "", result)
-	return result
-}
-
-function cmd2option(str,  tmp) {
-	if (match(str,"=")!=0) {
-		res = "\toption " substr(str,1,RSTART-1) "\t'" substr(str,RSTART+1) "'"
-	} else {
-		res= ""
-	}
-	return res
-}
-
-function cmd2config(atype,  aname) {
-	return "config \"" atype "\" \"" aname "\""
-}
-
-function update_config(cfg, update,  \
-  lines, line, l, n, i, i2, section, scnt, remove, tmp, aidx, rest) {
-	scnt = 1
-	linecnt=split(cfg "\n", lines, "\n")
-
-	cfg = ""
-	for (n = 1; n < linecnt; n++) {
-		# stupid parser for quoted arguments (e.g. for the type string).
-		# not to be used to gather variable values (backslash escaping doesn't work)
-		line = lines[n]
-		gsub(/^[ \t]*/, "", line)
-		gsub(/#.*$/, "", line)
-		i2 = 1
-		delete l
-		rest = line
-        	while (length(rest)) {
-			if (match(rest, /[ \t\"]+/)) {
-				if (RSTART>1) {
-					l[i2] = substr(rest,1,RSTART-1)
-					i2++
-				}
-				aidx=index(rest,"\"")
-				if (aidx>=RSTART && aidx<=RSTART+RLENGTH) {
-					rest=substr(rest,aidx+1)
-					# find the end of the string
-					match(rest,/\"/)
-					l[i2]=substr(rest,1,RSTART-1)
-					i2++
-				}
-				rest=substr(rest,RSTART+RLENGTH)
-			} else {
-				l[i2] = rest
-				i2++
-				rest = ""
-			}
-		}
-		line = lines[n]
-		
-		# when a command wants to set a config value for the current
-		# section and a blank line is encountered before an option with
-		# the same name, insert it here to maintain some coherency between
-		# manually and automatically created option lines
-		# if an option with the same name appears after this point, simply
-		# ignore it, because it is already set.
-		if ((section != "") && (l[1] != "option")) {
-			if (line ~ /^[ \t]*$/) {
-				if (update ~ "^" section "\\.") {
-					gsub("^" section ".", "", update)
-					cfg = cfg cmd2option(update) "\n"
-					gsub(/=.*$/, "", update)
-					update = "-" section "." update
-				}
-			}
-		}
-
-		if (l[1] == "config") {
-			# look for all unset values
-			if (section != "") {
-				flag=0
-				if (update ~ "^" section "\\.") {
-					flag=1
-					gsub("^" section ".", "", update)
-					cfg = cfg cmd2option(update) "\n"
-					
-					update = "-" section "." update
-				} 
-				if (flag!=0) cfg = cfg "\n"
-			}
-			
-			remove = ""
-			section = l[3]
-			if (!length(section)) {
-				section = "cfg" scnt
-			}	
-			scnt++
-			if (update == "-" section) {
-				remove = "section"
-				update = ""
-			} else if (update ~ "^@" section "=") {
-				update = ""
-			} else if (update ~ "^&" section "=") {
-				gsub("^&" section "=", "", update)
-				line = cmd2config(l[2],update) 
-				update = ""
-			}
-		}
-		if (remove == "option") remove = ""
-		if (l[1] == "option") {
-			if (update ~ "^-" section "\\." l[2] "$") remove = "option"
-			# if a supplied config value already exists, replace the whole line
-			if (match(update, "^" section "." l[2] "=")) {
-				gsub("^" section ".", "", update)
-				line = cmd2option(update)
-				update = ""
-			}
-		}
-		if (remove == "") cfg = cfg line "\n"
-	}
-	
-	# any new options for the last section??
-	if (section != "") {
-		if (update ~ "^" section "\\.") {
-			gsub("^" section ".", "", update)
-			cfg = cfg cmd2option(update) "\n"
-
-			update = "-" section "." update
-		} 
-	}
-
-	if (update ~ "^@") {
-		# new section
-		section = stype = substr(update,2)
-		gsub(/=.*$/,"",section)
-		gsub(/^.*=/,"",stype)
-		cfg = cfg "\nconfig \"" stype "\" \"" section "\"\n"
-	}
-
-	return cfg
-}
diff --git a/package/base-files/default/lib/config/uci.sh b/package/base-files/default/lib/config/uci.sh
deleted file mode 100755
index 957c1bb..0000000
--- a/package/base-files/default/lib/config/uci.sh
+++ /dev/null
@@ -1,139 +0,0 @@
-#!/bin/sh
-# Shell script defining macros for manipulating config files
-#
-# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
-# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-uci_load() {
-	local PACKAGE="$1"
-	config_load "$PACKAGE"
-	local PACKAGE_BASE="$(basename "$PACKAGE")"
-	[ -f "/tmp/.uci/${PACKAGE_BASE}" ] && {
-		. "/tmp/.uci/${PACKAGE_BASE}"
-		config_cb
-	}
-}
-
-uci_do_update() {
-	local FILENAME="$1"
-	local UPDATE="$2"
-	awk -f /lib/config/uci-update.awk -f - <<EOF
-BEGIN {
-	config = read_file("$FILENAME")
-	$UPDATE
-	print config
-}
-EOF
-}
-
-uci_add_update() {
-	local PACKAGE="$1"
-	local UPDATE="$2"
-	local PACKAGE_BASE="$(basename "$PACKAGE")"
-	
-	# FIXME: add locking?
-	mkdir -p "/tmp/.uci"
-	echo "$UPDATE" >> "/tmp/.uci/${PACKAGE_BASE}"
-}
-
-uci_set() {
-	local PACKAGE="$1"
-	local CONFIG="$2"
-	local OPTION="$3"
-	local VALUE="$4"
-
-	( # spawn a subshell so you don't mess up the current environment
-		uci_load "$PACKAGE"
-		config_get type "$CONFIG" TYPE
-		[ -z "$type" ]
-	) || uci_add_update "$PACKAGE" "CONFIG_SECTION='$CONFIG'${N}option '$OPTION' '$VALUE'"
-}
-
-uci_add() {
-	local PACKAGE="$1"
-	local TYPE="$2"
-	local CONFIG="$3"
-
-	uci_add_update "$PACKAGE" "config '$TYPE' '$CONFIG'"
-}
-
-uci_rename() {
-	local PACKAGE="$1"
-	local CONFIG="$2"
-	local VALUE="$3"
-
-	uci_add_update "$PACKAGE" "config_rename '$CONFIG' '$VALUE'"
-}
-
-uci_remove() {
-	local PACKAGE="$1"
-	local CONFIG="$2"
-	local OPTION="$3"
-
-	if [ -z "$OPTION" ]; then
-		uci_add_update "$PACKAGE" "config_clear '$CONFIG'"
-	else
-		uci_add_update "$PACKAGE" "config_unset '$CONFIG' '$OPTION'"
-	fi
-}
-
-uci_commit() {
-	local PACKAGE="$1"
-	local PACKAGE_BASE="$(basename "$PACKAGE")"
-	
-	mkdir -p /tmp/.uci
-	lock "/tmp/.uci/$PACKAGE_BASE.lock"
-	[ -f "/tmp/.uci/$PACKAGE_BASE" ] && (
-		updatestr=""
-		
-		# replace handlers
-		config() {
-			append updatestr "config = update_config(config, \"@$2=$1\")" "$N"
-		}
-		option() {
-			append updatestr "config = update_config(config, \"$CONFIG_SECTION.$1=$2\")" "$N"
-		}
-		config_rename() {
-			append updatestr "config = update_config(config, \"&$1=$2\")" "$N"
-		}
-		config_unset() {
-			append updatestr "config = update_config(config, \"-$1.$2\")" "$N"
-		}
-		config_clear() {
-			append updatestr "config = update_config(config, \"-$1\")" "$N"
-		}
-		
-		. "/tmp/.uci/$PACKAGE_BASE"
-
-		# completely disable handlers so that they don't get in the way
-		config() {
-			return 0
-		}
-		option() {
-			return 0
-		}
-		
-		config_load "$PACKAGE" || CONFIG_FILENAME="$ROOT/etc/config/$PACKAGE_BASE"
-		uci_do_update "$CONFIG_FILENAME" "$updatestr" > "/tmp/.uci/$PACKAGE_BASE.new" && {
-			mv -f "/tmp/.uci/$PACKAGE_BASE.new" "$CONFIG_FILENAME" && \
-			rm -f "/tmp/.uci/$PACKAGE_BASE"
-		} 
-	)
-	lock -u "/tmp/.uci/$PACKAGE_BASE.lock"
-}
-
-
diff --git a/package/base-files/default/lib/network/config.sh b/package/base-files/default/lib/network/config.sh
deleted file mode 100755
index 90f5bf7..0000000
--- a/package/base-files/default/lib/network/config.sh
+++ /dev/null
@@ -1,171 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-# DEBUG="echo"
-
-find_config() {
-	local iftype device iface ifaces ifn
-	for ifn in $interfaces; do
-		config_get iftype "$ifn" type
-		config_get iface "$ifn" ifname
-		case "$iftype" in
-			bridge) config_get ifaces "$ifn" ifnames;;
-		esac
-		config_get device "$ifn" device
-		for ifc in $device $iface $ifaces; do
-			[ "$ifc" = "$1" ] && {
-				echo "$ifn"
-				return 0
-			}
-		done
-	done
-
-	return 1;
-}
-
-scan_interfaces() {
-	local mode iftype iface ifname device
-	interfaces=
-	config_cb() {
-		case "$1" in
-			interface)
-				config_set "$2" auto 1
-			;;
-		esac
-		config_get iftype "$CONFIG_SECTION" TYPE
-		case "$iftype" in
-			interface)
-				config_get proto "$CONFIG_SECTION" proto
-				append interfaces "$CONFIG_SECTION"
-				config_get iftype "$CONFIG_SECTION" type
-				config_get ifname "$CONFIG_SECTION" ifname
-				config_set "$CONFIG_SECTION" device "$ifname"
-				case "$iftype" in
-					bridge)
-						config_set "$CONFIG_SECTION" ifnames "$ifname"
-						config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
-					;;
-				esac
-				( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$CONFIG_SECTION'"
-			;;
-		esac
-	}
-	config_load network
-}
-
-add_vlan() {
-	local vif="${1%\.*}"
-	
-	[ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
-		ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
-		$DEBUG vconfig add "$vif" "${1##*\.}"
-	}
-}
-
-setup_interface() {
-	local iface="$1"
-	local config="$2"
-	local proto
-
-	[ -n "$config" ] || {
-		config=$(find_config "$iface")
-		[ "$?" = 0 ] || return 1
-	}
-
-	proto="${3:-$(config_get "$config" proto)}"
-	config_get iftype "$config" type
-	
-	ifconfig "$iface" 2>/dev/null >/dev/null && {
-		# make sure the interface is removed from any existing bridge
-		unbridge "$iface"
-	}
-
-	# Setup VLAN interfaces
-	add_vlan "$iface"
-
-	# Setup bridging
-	case "$iftype" in
-		bridge)
-			ifconfig "$iface" up 2>/dev/null >/dev/null
-			ifconfig "br-$config" 2>/dev/null >/dev/null && {
-				$DEBUG brctl addif "br-$config" "$iface"
-				return 0
-			} || {
-				$DEBUG brctl addbr "br-$config"
-				$DEBUG brctl setfd "br-$config" 0
-				$DEBUG brctl addif "br-$config" "$iface"
-				iface="br-$config"
-			}
-		;;
-	esac
-	
-	# Interface settings
-	config_get mtu "$config" mtu
-	$DEBUG ifconfig "$iface" ${mtu:+mtu $mtu} up
-
-	pidfile="/var/run/$iface.pid"
-	case "$proto" in
-		static)
-			config_get ipaddr "$config" ipaddr
-			config_get netmask "$config" netmask
-			[ -z "$ipaddr" -o -z "$netmask" ] && return 1
-			
-			config_get ip6addr "$config" ip6addr
-			config_get gateway "$config" gateway
-			config_get dns "$config" dns
-			
-			$DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask"
-			[ -z "$gateway" ] || route add default gw "$gateway"
-			[ -z "$dns" -o -f /tmp/resolv.conf ] || {
-				for ns in $dns; do
-					echo "nameserver $ns" >> /tmp/resolv.conf
-				done
-			}
-
-			env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug "iface" &
-		;;
-		dhcp)
-			# prevent udhcpc from starting more than once
-			lock "/var/lock/dhcp-$iface"
-			pid="$(cat "$pidfile" 2>/dev/null)"
-			[ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null && {
-				lock -u "/var/lock/dhcp-$iface"
-				return 0
-			}
-
-			config_get ipaddr "$config" ipaddr
-			config_get netmask "$config" netmask
-			config_get hostname "$config" hostname
-			config_get proto1 "$config" proto
-
-			[ -z "$ipaddr" ] || \
-				$DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
-
-			# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
-			[ "$proto1" != "$proto" ] && dhcpopts="-n -q"
-			$DEBUG eval udhcpc -t 0 -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} -b -p "$pidfile" ${dhcpopts:- -R &}
-			lock -u "/var/lock/dhcp-$iface"
-		;;
-		*)
-			if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
-				eval "setup_interface_$proto '$iface' '$config' '$proto'" 
-			else
-				echo "Interface type $proto not supported."
-				return 1
-			fi
-		;;
-	esac
-}
-
-unbridge() {
-	local dev="$1"
-	local brdev
-
-	brctl show | grep "$dev" >/dev/null && {
-		# interface is still part of a bridge, correct that
-
-		for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do
-			brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null
-		done
-	}
-}
diff --git a/package/base-files/default/rom/note b/package/base-files/default/rom/note
deleted file mode 100644
index 1746eb0..0000000
--- a/package/base-files/default/rom/note
+++ /dev/null
@@ -1,3 +0,0 @@
-SQUASHFS USERS:
-After firstboot has been run, / will be jffs2 and /rom will be squashfs
-(* except when in failsafe)
diff --git a/package/base-files/default/sbin/hotplug b/package/base-files/default/sbin/hotplug
deleted file mode 100755
index b1b6f97..0000000
--- a/package/base-files/default/sbin/hotplug
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-# bypass the normal hotplug path for firmware loading
-# would otherwise cause problems with drivers like bcm43xx
-[ "$1" = "firmware" -a "$ACTION" = "add" ] && {
-	[ -f "/lib/firmware/$FIRMWARE" ] && {
-		echo 1 > "/sys$DEVPATH/loading"
-		cp "/lib/firmware/$FIRMWARE" "/sys$DEVPATH/data"
-		echo 0 > "/sys$DEVPATH/loading"
-	}
-	exit 0
-}
-
-. /etc/functions.sh
-
-PATH=/bin:/sbin:/usr/bin:/usr/sbin
-LOGNAME=root
-USER=root
-export PATH LOGNAME USER
-
-[ \! -z "$1" -a -d /etc/hotplug.d/$1 ] && {
-	for script in $(ls /etc/hotplug.d/$1/* 2>&-); do (
-		[ -f $script ] && . $script
-	); done
-}
diff --git a/package/base-files/default/sbin/ifdown b/package/base-files/default/sbin/ifdown
deleted file mode 100755
index 26d0e62..0000000
--- a/package/base-files/default/sbin/ifdown
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-[ $# = 0 ] && { echo "  $0 <group>"; exit; }
-. /etc/functions.sh
-include /lib/network
-scan_interfaces
-
-cfg=$1
-debug "### ifdown $cfg ###"
-
-config_get proto "$cfg" proto
-[ -z "$proto" ] && { echo "interface not found."; exit; }
-
-config_get iface "$cfg" device
-[ "$proto" = "static" ] && {
-	env -i ACTION="ifdown" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug "iface" &
-}
-
-# call interface stop handler
-( type "stop_interface_$proto" ) >/dev/null 2>/dev/null && eval "stop_interface_$proto '$cfg'"
-
-# make sure all locks are removed
-for lock in "/var/lock/dhcp-$iface" "/var/lock/ppp-$iface"; do
-	[ -f "$lock" ] && {
-		lock -u "$lock"
-		sleep 1
-	}
-done
-
-# kill active ppp daemon and other processes
-config_get ifname "$cfg" ifname
-pids="$(head -n1 -q /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid 2>/dev/null)"
-for pid in $pids; do 
-	[ -d "/proc/$pid" ] && {
-		kill $pid
-		[ -d "/proc/$pid" ] && {
-			sleep 1
-			kill -9 $pid 2>/dev/null >/dev/null
-		}
-	}
-done
-rm -f /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid
-
-config_get ifname "$cfg" ifname
-config_get device "$cfg" ifname
-
-[ ."$device" != ."$ifname" ] || device=
-for dev in $ifname $device; do
-	ifconfig "$ifname" 0.0.0.0 down >/dev/null 2>/dev/null
-done
-
-config_get iftype "$cfg" type
-[ "$iftype" = "bridge" ] && brctl delbr "$ifname" >/dev/null 2>/dev/null
-
diff --git a/package/base-files/default/sbin/ifup b/package/base-files/default/sbin/ifup
deleted file mode 100755
index 81ec2c0..0000000
--- a/package/base-files/default/sbin/ifup
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-. /sbin/ifdown "$@"
-
-config_get iftype "$1" type
-config_get ifname "$1" device
-
-for dev in $ifname; do
-	setup_interface "$dev" "$1"
-done
diff --git a/package/base-files/default/sbin/mount_root b/package/base-files/default/sbin/mount_root
deleted file mode 100755
index 81660f0..0000000
--- a/package/base-files/default/sbin/mount_root
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-mount none /proc -t proc
-size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
-mount none /tmp -t tmpfs -o size=$size,nosuid,nodev,mode=1777
-mkdir -p /dev/pts
-mount none /dev/pts -t devpts
-mount -t sysfs none /sys 2>&-
-mount -o remount,rw /dev/root /
diff --git a/package/base-files/default/sbin/wifi b/package/base-files/default/sbin/wifi
deleted file mode 100755
index d877c73..0000000
--- a/package/base-files/default/sbin/wifi
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-. /etc/functions.sh
-
-find_net_config() {(
-	local vif="$1"
-	local cfg
-	local ifname
-
-	config_get cfg "$vif" network
-
-	[ -z "$cfg" ] && {
-		include /lib/network
-		scan_interfaces
-
-		config_get ifname "$vif" ifnamea
-
-		cfg="$(find_config "$ifname")"
-	}
-	[ -z "$cfg" ] && return 0
-	echo "$cfg"
-)}
-
-
-bridge_interface() {(
-	local cfg="$1"
-	[ -z "$cfg" ] && return 0
-
-	include /lib/network
-	scan_interfaces
-
-	config_get iftype "$cfg" type
-	[ "$iftype" = bridge ] && config_get "$cfg" ifname
-)}
-
-
-wifi_up() {
-	for device in ${2:-$DEVICES}; do (
-		config_get iftype "$device" type
-		if eval "type enable_$iftype" 2>/dev/null >/dev/null; then
-			eval "scan_$iftype '$device'"
-			eval "enable_$iftype '$device'" || echo "$device($iftype): Setup failed"
-		else
-			echo "$device($iftype): Interface type not supported"
-		fi
-	); done
-}
-
-wifi_down() {
-	for device in ${2:-$DEVICES}; do (
-		config_get iftype "$device" type
-		if eval "type disable_$iftype" 2>/dev/null >/dev/null; then
-			eval "scan_$iftype '$device'"
-			eval "disable_$iftype '$device'" || echo "$device($iftype): Disable failed"
-		else
-			echo "$device($iftype): Interface type not supported"
-		fi
-	); done
-}
-
-wifi_detect() {
-	for driver in ${2:-$DRIVERS}; do (
-		if eval "type detect_$driver" 2>/dev/null >/dev/null; then
-			eval "detect_$driver" || echo "$driver: Detect failed" >&2
-		else
-			echo "$driver: Hardware detection not supported" >&2
-		fi
-	); done
-}
-
-start_net() {(
-	local iface="$1"
-	local config="$2"
-
-	include /lib/network
-	scan_interfaces
-	setup_interface "$1" "$2"
-)}
-
-config_get_bool() {
-	local _tmp
-	config_get "$1" "$2" "$3"
-	eval "_tmp=\$$1"
-	case "$_tmp" in
-		1|on|enabled) eval "$1=1";;
-		0|off|disabled) eval "$1=0";;
-		*) eval "$1=${4:-0}";;
-	esac
-}
-
-config_cb() {
-	config_get TYPE "$CONFIG_SECTION" TYPE
-	case "$TYPE" in
-		wifi-device)
-			append DEVICES "$CONFIG_SECTION"
-		;;
-		wifi-iface)
-			config_get device "$CONFIG_SECTION" device
-			config_get vifs "$device" vifs 
-			append vifs "$CONFIG_SECTION"
-			config_set "$device" vifs "$vifs"
-		;;
-	esac
-}
-
-DEVICES=
-DRIVERS=
-config_load wireless
-include /lib/wifi
-
-case "$1" in
-	down) wifi_down "$2";;
-	detect) wifi_detect "$2";;
-	*) wifi_up "$2";;
-esac
diff --git a/package/base-files/default/usr/lib/common.awk b/package/base-files/default/usr/lib/common.awk
deleted file mode 100644
index c5ce680..0000000
--- a/package/base-files/default/usr/lib/common.awk
+++ /dev/null
@@ -1,68 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-function portstr(type, str) {
-	gsub(/-/, ":", str)
-	if (insmod_mport != 1) {
-		print "insmod ipt_multiport >&- 2>&-"
-		insmod_mport = 1
-	}
-	if (type == "src") return " -m multiport --sports " str
-	else return " -m multiport --dports " str
-}
-
-function str2ipt(str) {
-	str2data(str)
-	_cmd = ""
-	if (_l["src"] != "") _cmd = _cmd " -s " _l["src"]
-	if (_l["dest"] != "") _cmd = _cmd " -d " _l["dest"]
-	if (_l["proto"] != "") {
-		_cmd = _cmd " -p " _l["proto"]
-	}
-	# scripts need to check for proto="" and emit two rules in that case
-	if ((_l["proto"] == "") || (_l["proto"] == "tcp") || (_l["proto"] == "udp")) {
-		if (_l["sport"] != "") _cmd = _cmd portstr("src", _l["sport"])
-		if (_l["dport"] != "") _cmd = _cmd portstr("dest", _l["dport"])
-	}
-	if (_l["layer7"] != "") {
-		if (insmod_l7 != 1) {
-			print "insmod ipt_layer7 >&- 2>&-"
-			insmod_l7 = 1
-		}
-		_cmd = _cmd " -m layer7 --l7proto " _l["layer7"]
-	}
-	return _cmd
-}
-
-function str2data(str) {
-	delete _l
-	_n = split(str, _o, "[\t ]")
-	for (_i = 1; _i <= _n; _i++) {
-		_n2 = split(_o[_i], _c, "=")
-		if (_n2 == 2) _l[_c[1]] = _c[2]
-	}
-}
-
-function bitcount(c) {
-	c=and(rshift(c, 1),0x55555555)+and(c,0x55555555)
-	c=and(rshift(c, 2),0x33333333)+and(c,0x33333333)
-	c=and(rshift(c, 4),0x0f0f0f0f)+and(c,0x0f0f0f0f)
-	c=and(rshift(c, 8),0x00ff00ff)+and(c,0x00ff00ff)
-	c=and(rshift(c,16),0x0000ffff)+and(c,0x0000ffff)
-	return c
-}
-
-function validate_netmask(nm) {
-	return and(-nm,compl(nm))
-}
-
-function ip2int(ip) {
-	for (ret=0,n=split(ip,a,"\."),x=1;x<=n;x++) ret=or(lshift(ret,8),a[x]) 
-	return ret
-}
-
-function int2ip(ip,ret,x) {
-	ret=and(ip,255)
-	ip=rshift(ip,8)
-	for(;x<3;ret=and(ip,255)"."ret,ip=rshift(ip,8),x++);
-	return ret
-}
diff --git a/package/base-files/default/usr/share/udhcpc/default.script b/package/base-files/default/usr/share/udhcpc/default.script
deleted file mode 100755
index 53c8faf..0000000
--- a/package/base-files/default/usr/share/udhcpc/default.script
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
-. /etc/functions.sh
-include /lib/network
-
-RESOLV_CONF="/tmp/resolv.conf"
-
-hotplug_event() {
-	scan_interfaces
-	for ifc in $interfaces; do
-		config_get ifname $ifc ifname
-		[ "$ifname" = "$interface" ] || continue
-
-		config_get proto $ifc proto
-		[ "$proto" = "dhcp" ] || continue
-
-		env -i ACTION="$1" INTERFACE="$ifc" DEVICE="$ifname" PROTO=dhcp /sbin/hotplug iface
-	done
-}
-
-case "$1" in
-	deconfig)
-		ifconfig $interface 0.0.0.0
-		hotplug_event ifdown
-	;;
-	renew|bound)
-		ifconfig $interface $ip \
-		netmask ${subnet:-255.255.255.0} \
-		broadcast ${broadcast:-+}
-
-		if [ -n "$router" ] ; then
-			echo "deleting routers"
-			while route del default gw 0.0.0.0 dev $interface >&- 2>&- ; do :; done
-					
-			for i in $router ; do
-				echo "adding router $i"
-				route add default gw $i dev $interface
-			done
-		fi
-		
-		[ -n "$dns" ] && {
-			echo -n > $RESOLV_CONF
-			${domain:+echo search $domain} >> $RESOLV_CONF
-			for i in $dns ; do
-				echo "adding dns $i"
-				echo "nameserver $i" >> $RESOLV_CONF
-			done
-		}
-		
-		hotplug_event ifup
-		
-		# user rules
-		[ -f /etc/udhcpc.user ] && . /etc/udhcpc.user
-	;;
-esac
-
-exit 0
diff --git a/package/base-files/files/bin/ipcalc b/package/base-files/files/bin/ipcalc
new file mode 100755
index 0000000..e8efa6b
--- /dev/null
+++ b/package/base-files/files/bin/ipcalc
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+awk -f /usr/lib/common.awk -f - $* <<EOF
+BEGIN {
+	ipaddr=ip2int(ARGV[1])
+	netmask=ip2int(ARGV[2])
+	network=and(ipaddr,netmask)
+	broadcast=or(network,compl(netmask))
+	
+	start=or(network,and(ip2int(ARGV[3]),compl(netmask)))
+	limit=network+1
+	if (start<limit) start=limit
+	
+	end=start+ARGV[4]
+	limit=or(network,compl(netmask))-1
+	if (end>limit) end=limit
+
+	print "IP="int2ip(ipaddr)
+	print "NETMASK="int2ip(netmask)
+	print "BROADCAST="int2ip(broadcast)
+	print "NETWORK="int2ip(network)
+	print "PREFIX="32-bitcount(compl(netmask))
+	
+	# range calculations:
+	# ipcalc <ip> <netmask> <start> <num>
+	
+	if (ARGC > 3) {
+		print "START="int2ip(start)
+		print "END="int2ip(end-1)
+	}
+}
+EOF
diff --git a/package/base-files/files/bin/login b/package/base-files/files/bin/login
new file mode 100755
index 0000000..ff5d366
--- /dev/null
+++ b/package/base-files/files/bin/login
@@ -0,0 +1,18 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+grep '^root:[^!]' /etc/passwd >&- 2>&-
+[ "$?" = "0" -a -z "$FAILSAFE" ]  &&  
+{
+    echo "Login failed."
+    exit 0
+} || {
+cat << EOF
+ === IMPORTANT ============================
+  Use 'passwd' to set your login password
+  this will disable telnet and enable SSH
+ ------------------------------------------
+EOF
+}
+
+exec /bin/ash --login
diff --git a/package/base-files/files/bin/uci b/package/base-files/files/bin/uci
new file mode 100755
index 0000000..9b50380
--- /dev/null
+++ b/package/base-files/files/bin/uci
@@ -0,0 +1,178 @@
+#!/bin/sh
+# Shell script for interacting with config files
+#
+# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
+# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+. /etc/functions.sh
+include /lib/config
+
+SEP="[^0-9A-Za-z_]"
+
+do_get() {
+	local PACKAGE
+	local CONFIG
+	local OPTION
+	local DUMMY
+
+	strtok "$*" PACKAGE . CONFIG . OPTION $SEP DUMMY
+
+	[ $? -ne 3 ] && {
+		uci_usage get
+		exit 1
+	}
+
+	uci_load "$PACKAGE"
+	config_get "$CONFIG" "$OPTION"
+}
+
+do_set() {
+	local PACKAGE
+	local CONFIG
+	local OPTION
+	local VALUE
+
+	strtok "$1" PACKAGE . CONFIG = VALUE
+	[ $? -ne 3 ] && {
+		uci_usage set
+		exit 1
+	}
+	
+	strtok "$CONFIG" CONFIG . OPTION
+	
+	if [ $? -eq 1 ]; then
+		uci_add "$PACKAGE" "$VALUE" "$CONFIG"
+	else
+		uci_set "$PACKAGE" "$CONFIG" "$OPTION" "$VALUE"
+	fi
+}
+
+do_rename() {
+	[ $# -ne 3 ] && {
+		uci_usage rename
+		exit 1
+	}
+	uci_rename "$@"
+}
+
+do_remove() {
+	local PACKAGE
+	local CONFIG
+	local OPTION
+	local DUMMY
+
+	strtok "$*" PACKAGE . CONFIG . OPTION $SEP DUMMY
+	[ $? -ne 3 -a $? -ne 2 ] && {
+		uci_usage rename
+		exit 1
+	}
+	uci_remove "$PACKAGE" "$CONFIG" ${OPTION:+"$OPTION"}
+}
+
+do_commit() {
+	local PACKAGE="$1"
+	for package in ${PACKAGE:-$(cd /tmp/.uci; ls)}; do 
+		uci_commit "$package"
+	done
+}
+
+do_show() {
+	local PACKAGE
+	local CONFIG
+	local DUMMY
+
+	strtok "$*" PACKAGE . CONFIG $SEP DUMMY
+	[ $? -gt 2 ] && {
+		uci_usage show
+		exit 1
+	}
+	
+	for package in ${PACKAGE:-$(cd /etc/config; ls)}; do
+		SECTION=""
+	
+		config_cb() {
+			if [ -z "$CONFIG" -o "$CONFIG" = "$2" ]; then
+				append SECTION "$2"
+				option_cb() {
+					append "${CONFIG_SECTION}_VARS" "$1"
+				}
+			else
+				option_cb() {
+					return 0
+				}
+			fi
+		}
+			
+		uci_load "$package"
+	
+		for section in $SECTION; do
+			config_get type "$section" TYPE
+			[ -z "$type" ] && continue
+			echo "$package.$section=$type"
+			eval "VARS=\"\${${section}_VARS}\""
+			for var in $VARS; do
+				config_get val "$section" "$var"
+				[ -n "$val" ] && {
+					echo "$package.$section.$var=$val"
+					config_set "$section" "$var" ""
+				}
+			done
+			config_set "$section" TYPE ""
+		done
+	done
+}
+
+uci_usage() {
+	case "$1" in
+		show) echo "$0 show [<package>[.<config>]]";;
+		get) echo "$0 get <package>.<config>.<option>";;
+		set) echo "$0 set <package>.<config>[.<option>]=<value>";;
+		del) echo "$0 del <package>.<config>[.<option>]";;
+		rename) echo "$0 rename <package> <config> <name>";;
+		commit) echo "$0 commit [<package> ... ]";;
+		*) 
+			echo "Syntax: $0 <command> <arguments...>"
+			echo
+			uci_usage show
+			uci_usage get
+			uci_usage set
+			uci_usage del
+			uci_usage rename
+			uci_usage commit
+			echo
+			exit 1
+		;;
+	esac
+}
+
+if [ $# -eq 0 ] ; then
+	uci_usage
+	exit 0
+fi
+
+local CMD="$1"
+shift
+case "$CMD" in
+	set) do_set "$@";;
+	del) do_remove "$@";;
+	rename) do_rename "$@";;
+	get) do_get "$@";;
+	show) do_show "$@";;
+	commit) do_commit "$@";;
+	*) uci_usage;;
+esac
+exit 0
diff --git a/package/base-files/files/etc/banner b/package/base-files/files/etc/banner
new file mode 100644
index 0000000..c2fbc12
--- /dev/null
+++ b/package/base-files/files/etc/banner
@@ -0,0 +1,10 @@
+  _______                     ________        __
+ |       |.-----.-----.-----.|  |  |  |.----.|  |_
+ |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
+ |_______||   __|_____|__|__||________||__|  |____|
+          |__| W I R E L E S S   F R E E D O M
+ KAMIKAZE (bleeding edge, $R) -------------------
+  * 10 oz Vodka       Shake well with ice and strain
+  * 10 oz Triple sec  mixture into 10 shot glasses.
+  * 10 oz lime juice  Salute!
+ ---------------------------------------------------
diff --git a/package/base-files/files/etc/config/network b/package/base-files/files/etc/config/network
new file mode 100644
index 0000000..1d5ded3
--- /dev/null
+++ b/package/base-files/files/etc/config/network
@@ -0,0 +1,13 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
diff --git a/package/base-files/files/etc/functions.sh b/package/base-files/files/etc/functions.sh
new file mode 100755
index 0000000..bf412df
--- /dev/null
+++ b/package/base-files/files/etc/functions.sh
@@ -0,0 +1,149 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006 Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
+
+alias debug=${DEBUG:-:}
+
+# newline
+readonly N="
+"
+
+_C=0
+
+hotplug_dev() {
+	env -i ACTION=$1 INTERFACE=$2 /sbin/hotplug net
+}
+
+append() {
+	local var="$1"
+	local value="$2"
+	local sep="${3:- }"
+	
+	eval "export -n -- \"$var=\${$var:+\${$var}\${value:+\$sep}}\$value\""
+}
+
+reset_cb() {
+	config_cb() { return 0; }
+	option_cb() { return 0; }
+}
+reset_cb
+
+config () {
+	local cfgtype="$1"
+	local name="$2"
+    
+	_C=$((_C + 1))
+	name="${name:-cfg${_C}}"
+	config_cb "$cfgtype" "$name"
+	CONFIG_SECTION="$name"
+	export -n "CONFIG_${CONFIG_SECTION}_TYPE=$cfgtype"
+}
+
+option () {
+	local varname="$1"; shift
+	local value="$*"
+	
+	export -n "CONFIG_${CONFIG_SECTION}_${varname}=$value"
+	option_cb "$varname" "$*"
+}
+
+config_rename() {
+	local OLD="$1"
+	local NEW="$2"
+	local oldvar
+	local newvar
+	
+	[ "$OLD" -a "$NEW" ] || return
+	for oldvar in `set | grep ^CONFIG_${OLD}_ | \
+		sed -e 's/\(.*\)=.*$/\1/'` ; do
+		newvar="CONFIG_${NEW}_${oldvar##CONFIG_${OLD}_}"
+		eval "export -n \"$newvar=\${$oldvar}\""
+		unset "$oldvar"
+	done
+	
+	[ "$CONFIG_SECTION" = "$OLD" ] && CONFIG_SECTION="$NEW"
+}
+
+config_unset() {
+	config_set "$1" "$2" ""
+}
+
+config_clear() {
+	local SECTION="$1"
+	local oldvar
+	
+	for oldvar in `set | grep ^CONFIG_${SECTION}_ | \
+		sed -e 's/\(.*\)=.*$/\1/'` ; do 
+		unset $oldvar 
+	done
+}
+
+config_load() {
+	local file="/etc/config/$1"
+	_C=0
+	CONFIG_SECTION=
+	
+	[ -e "$file" ] && {
+		. $file
+	} || return 1
+	
+	${CONFIG_SECTION:+config_cb}
+}
+
+config_get() {
+	case "$3" in
+		"") eval "echo \"\${CONFIG_${1}_${2}}\"";;
+		*)  eval "export -n -- \"$1=\${CONFIG_${2}_${3}}\"";;
+	esac
+}
+
+config_set() {
+	local section="$1"
+	local option="$2"
+	local value="$3"
+	export -n "CONFIG_${section}_${option}=$value"
+}
+
+load_modules() {
+	sed 's/^[^#]/insmod &/' $* | ash 2>&- || :
+}
+
+include() {
+	local file
+	
+	for file in $(ls $1/*.sh 2>/dev/null); do
+		. $file
+	done
+}
+
+find_mtd_part() {
+	local PART="$(grep "\"$1\"" /proc/mtd | awk -F: '{print $1}')"
+	
+	PART="${PART##mtd}"
+	echo "${PART:+/dev/mtdblock/$PART}"
+}
+
+strtok() { # <string> { <variable> [<separator>] ... }
+	local tmp
+	local val="$1"
+	local count=0
+
+	shift
+
+	while [ $# -gt 1 ]; do
+		tmp="${val%%$2*}"
+
+		[ "$tmp" = "$val" ] && break
+
+		val="${val#$tmp$2}"
+
+		export -n "$1=$tmp"; count=$((count+1))
+		shift 2
+	done
+
+	if [ $# -gt 0 -a "$val" ]; then
+		export -n "$1=$val"; count=$((count+1))
+	fi
+
+	return $count
+}
diff --git a/package/base-files/files/etc/group b/package/base-files/files/etc/group
new file mode 100644
index 0000000..c4e77f3
--- /dev/null
+++ b/package/base-files/files/etc/group
@@ -0,0 +1,2 @@
+root:x:0:
+nogroup:x:65534:
diff --git a/package/base-files/files/etc/hosts b/package/base-files/files/etc/hosts
new file mode 100644
index 0000000..ce138ec
--- /dev/null
+++ b/package/base-files/files/etc/hosts
@@ -0,0 +1 @@
+127.0.0.1 localhost OpenWrt
diff --git a/package/base-files/files/etc/hotplug.d/block/01-mount b/package/base-files/files/etc/hotplug.d/block/01-mount
new file mode 100755
index 0000000..db8ccda
--- /dev/null
+++ b/package/base-files/files/etc/hotplug.d/block/01-mount
@@ -0,0 +1,26 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+DEV=${DEVPATH##*/}
+{
+echo "ACTION=$ACTION DEVPATH=$DEVPATH $0 $*"
+case "$ACTION" in
+add)
+	echo -ne "waiting for $DEV"
+	while [ ! -b /dev/$DEV ]; do {
+		echo -ne "."
+		sleep 1
+		time=$((time+1)); [ $time -gt 10 ] && break
+	}; done
+	
+	[ ${DEV%%[0-9]} != ${DEV} ] && {
+		mkdir -p /tmp/$DEV
+		mount /dev/$DEV /tmp/$DEV -t auto -o sync
+	}
+	;;
+remove)
+	umount /tmp/$DEV && rmdir /tmp/$DEV
+	rm -f /dev/$DEV /tmp/$DEV
+	;;
+esac
+} 2>&1 | logger
diff --git a/package/base-files/files/etc/hotplug.d/net/10-net b/package/base-files/files/etc/hotplug.d/net/10-net
new file mode 100644
index 0000000..9b72338
--- /dev/null
+++ b/package/base-files/files/etc/hotplug.d/net/10-net
@@ -0,0 +1,35 @@
+# Copyright (C) 2006 OpenWrt.org
+
+include /lib/network
+
+addif() {
+	scan_interfaces
+	local cfg="$(find_config "$INTERFACE")"
+
+	# check the autoload setting
+	config_get auto "$cfg" auto
+	case "$auto" in
+		1|on|enabled) setup_interface "$INTERFACE";;
+	esac
+
+
+	# find all vlan configurations for this interface and set them up as well
+	for ifc in $interfaces; do
+		config_get iftype "$ifc" type
+		config_get ifs "$ifc" device
+		for dev in $ifs; do
+			[ "${dev%%\.*}" = "$INTERFACE" -a "$dev" != "$INTERFACE" ] && {
+				add_vlan "$dev"
+			}
+		done
+	done
+}
+
+case "$ACTION" in
+	add|register)
+		case "$PHYSDEVDRIVER" in
+			natsemi) sleep 1;;
+		esac
+		addif
+	;;
+esac
diff --git a/package/base-files/files/etc/hotplug.d/usb/01-ln b/package/base-files/files/etc/hotplug.d/usb/01-ln
new file mode 100755
index 0000000..f9eda02
--- /dev/null
+++ b/package/base-files/files/etc/hotplug.d/usb/01-ln
@@ -0,0 +1,33 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+case "$ACTION" in
+add) 
+	[ -f /sys/${DEVPATH}/idVendor -a "$(cat /sys/${DEVPATH}/idVendor)" -ne "0000" ] && {
+		cd /sys/${DEVPATH}
+
+		NUM=${DEVPATH##*/}
+		HOST=$(find ${NUM}:*/host* -type d)
+		HOST=${HOST##*/host}
+
+		echo -ne "waiting for disk"
+
+		while [ ! -d "/dev/scsi/host${HOST}/bus0/target0/lun0" ]; do {
+			echo -ne "."
+			sleep 1;
+			time=$((time+1)); [ $time -gt 10 ] && break
+		}; done
+		echo
+		
+		cd  /sys/bus/scsi/devices/${HOST}\:0\:0\:0
+		for BLOCK in block:* ; do {
+			cd ${BLOCK}
+			BLOCK=${BLOCK##block\:}
+			ln -sf /dev/scsi/host${HOST}/bus0/target0/lun0/disc /dev/${BLOCK} 
+			for DEV in ${BLOCK}*; do {
+				ln -sf /dev/scsi/host${HOST}/bus0/target0/lun0/part${DEV##$BLOCK} /dev/$DEV
+			}; done
+		}; done
+	} 2>&1 | logger 
+	;;
+esac
diff --git a/package/base-files/files/etc/init.d/boot b/package/base-files/files/etc/init.d/boot
new file mode 100755
index 0000000..c583652
--- /dev/null
+++ b/package/base-files/files/etc/init.d/boot
@@ -0,0 +1,26 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=10
+start() {
+	[ -f /proc/mounts ] || /sbin/mount_root
+	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
+	vconfig set_name_type DEV_PLUS_VID_NO_PAD
+	
+	HOSTNAME=${wan_hostname%%.*}
+	echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
+	
+	mkdir -p /var/run
+	mkdir -p /var/log
+	mkdir -p /var/lock
+	touch /var/log/wtmp
+	touch /var/log/lastlog
+	[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
+	
+	# manually trigger hotplug before loading modules
+	for iface in $(awk -F: '/:/ {print $1}' /proc/net/dev); do
+		/usr/bin/env -i ACTION=add INTERFACE="$iface" /sbin/hotplug net
+	done
+	
+	load_modules /etc/modules.d/*
+}
diff --git a/package/base-files/files/etc/init.d/network b/package/base-files/files/etc/init.d/network
new file mode 100755
index 0000000..45d5311
--- /dev/null
+++ b/package/base-files/files/etc/init.d/network
@@ -0,0 +1,14 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=40
+start() {
+	setup_switch() { return 0; }
+
+	include /lib/network
+	setup_switch
+	[ -e /etc/config/wireless ] || \
+		/sbin/wifi detect > /etc/config/wireless
+	/sbin/wifi up
+}
+
diff --git a/package/base-files/files/etc/init.d/rcS b/package/base-files/files/etc/init.d/rcS
new file mode 100755
index 0000000..fe21d03
--- /dev/null
+++ b/package/base-files/files/etc/init.d/rcS
@@ -0,0 +1,19 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+${FAILSAFE:+exit}
+
+# FIXME: add logging configuration
+#[ -f /etc/config/network ] && . /etc/config/network
+#eval $(ipcalc "$log_ipaddr")
+#[ "$log_ipaddr" = "$IP" ] || log_ipaddr=""
+syslogd -C 16 #${log_ipaddr:+-L -R $log_ipaddr}
+klogd
+
+(
+	for i in /etc/rc.d/S*; do
+		$i boot 2>&1
+	done 
+	
+	sysctl -p >&-
+) | logger -s -p 6 -t '' &
diff --git a/package/base-files/files/etc/inittab b/package/base-files/files/etc/inittab
new file mode 100644
index 0000000..39e134c
--- /dev/null
+++ b/package/base-files/files/etc/inittab
@@ -0,0 +1,3 @@
+::sysinit:/etc/init.d/rcS
+tts/0::askfirst:/bin/ash --login
+#tts/1::askfirst:/bin/ash --login
diff --git a/package/base-files/files/etc/ipkg.conf b/package/base-files/files/etc/ipkg.conf
new file mode 100644
index 0000000..2931d2c
--- /dev/null
+++ b/package/base-files/files/etc/ipkg.conf
@@ -0,0 +1,3 @@
+src snapshots http://openwrt.org/downloads/snapshots/$S/packages
+dest root /
+dest ram /tmp
diff --git a/package/base-files/files/etc/passwd b/package/base-files/files/etc/passwd
new file mode 100644
index 0000000..3b660a0
--- /dev/null
+++ b/package/base-files/files/etc/passwd
@@ -0,0 +1,2 @@
+root:!:0:0:root:/tmp:/bin/ash
+nobody:*:65534:65534:nobody:/var:/bin/false
diff --git a/package/base-files/files/etc/profile b/package/base-files/files/etc/profile
new file mode 100644
index 0000000..ae514b0
--- /dev/null
+++ b/package/base-files/files/etc/profile
@@ -0,0 +1,12 @@
+#!/bin/sh
+[ -f /etc/banner ] && cat /etc/banner
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+export PS1='\u@\h:\w\$ '
+
+alias more=less
+[ -x /usr/bin/vim ] || alias vim=vi
+
+arp() { cat /proc/net/arp; }
+ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
+reboot() { ifdown wan 2>&1 >/dev/null ; /sbin/reboot; }
diff --git a/package/base-files/files/etc/protocols b/package/base-files/files/etc/protocols
new file mode 100644
index 0000000..53fecb6
--- /dev/null
+++ b/package/base-files/files/etc/protocols
@@ -0,0 +1,56 @@
+# Internet (IP) protocols
+#
+# Updated from http://www.iana.org/assignments/protocol-numbers and other
+# sources.
+# New protocols will be added on request if they have been officially
+# assigned by IANA and are not historical.
+# If you need a huge list of used numbers please install the nmap package.
+
+ip	0	IP		# internet protocol, pseudo protocol number
+#hopopt	0	HOPOPT		# IPv6 Hop-by-Hop Option [RFC1883]
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# Internet Group Management
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+egp	8	EGP		# exterior gateway protocol
+igp	9	IGP		# any private interior gateway (Cisco)
+pup	12	PUP		# PARC universal packet protocol
+udp	17	UDP		# user datagram protocol
+hmp	20	HMP		# host monitoring protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+rdp	27	RDP		# "reliable datagram" protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4 [RFC905]
+xtp	36	XTP		# Xpress Transfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp 38	IDPR-CMTP	# IDPR Control Message Transport
+ipv6	41	IPv6		# Internet Protocol, version 6
+ipv6-route 43	IPv6-Route	# Routing Header for IPv6
+ipv6-frag 44	IPv6-Frag	# Fragment Header for IPv6
+idrp	45	IDRP		# Inter-Domain Routing Protocol
+rsvp	46	RSVP		# Reservation Protocol
+gre	47	GRE		# General Routing Encapsulation
+esp	50	IPSEC-ESP	# Encap Security Payload [RFC2046]
+ah	51	IPSEC-AH	# Authentication Header [RFC2402]
+skip	57	SKIP		# SKIP
+ipv6-icmp 58	IPv6-ICMP	# ICMP for IPv6
+ipv6-nonxt 59	IPv6-NoNxt	# No Next Header for IPv6
+ipv6-opts 60	IPv6-Opts	# Destination Options for IPv6
+rspf	73	RSPF CPHB	# Radio Shortest Path First (officially CPHB)
+vmtp	81	VMTP		# Versatile Message Transport
+eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+ax.25	93	AX.25		# AX.25 frames
+ipip	94	IPIP		# IP-within-IP Encapsulation Protocol
+etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation [RFC3378]
+encap	98	ENCAP		# Yet Another IP encapsulation [RFC1241]
+#	99			# any private encryption scheme
+pim	103	PIM		# Protocol Independent Multicast
+ipcomp	108	IPCOMP		# IP Payload Compression Protocol
+vrrp	112	VRRP		# Virtual Router Redundancy Protocol
+l2tp	115	L2TP		# Layer Two Tunneling Protocol [RFC2661]
+isis	124	ISIS		# IS-IS over IPv4
+sctp	132	SCTP		# Stream Control Transmission Protocol
+fc	133	FC		# Fibre Channel
+
diff --git a/package/base-files/files/etc/rc.common b/package/base-files/files/etc/rc.common
new file mode 100755
index 0000000..7180b0f
--- /dev/null
+++ b/package/base-files/files/etc/rc.common
@@ -0,0 +1,83 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+. $IPKG_INSTROOT/etc/functions.sh
+
+START=50
+
+start() {
+	return 0
+}
+
+stop() {
+	return 0
+}
+
+reload() {
+	return 1
+}
+
+restart() {
+	stop
+	start
+}
+
+boot() {
+	start
+}
+
+shutdown() {
+	return 0
+}
+
+disable() {
+	name="$(basename "${initscript}")"
+	rm -f "$IPKG_INSTROOT"/etc/rc.d/S??$name
+}
+
+enable() {
+	name="$(basename "${initscript}")"
+	disable
+	ln -s "/etc/init.d/$name" "$IPKG_INSTROOT/etc/rc.d/S${START}${name##S[0-9][0-9]}"
+}
+
+depends() {
+	return 0
+}
+
+help() {
+	cat <<EOF
+Syntax: $initscript [command]
+
+Available commands:
+	start	Start the service
+	stop	Stop the service
+	restart	Restart the service
+	reload	Reload configuration files (or restart if that fails)
+	enable	Enable service autostart
+	disable	Disable service autostart
+$EXTRA_HELP
+EOF
+}
+
+initscript="$1"
+action="$2"
+
+. "$initscript"
+
+cmds=
+for cmd in $EXTRA_COMMANDS; do
+	cmds="${cmds:+$cmds$N}$cmd) $cmd;;"
+done
+eval "case \"\$action\" in
+	start) start;;
+	stop) stop;;
+	reload) reload || restart;;
+	restart) restart;;
+	boot) boot;;
+	shutdown) shutdown;;
+	enable) enable;;
+	disable) disable;;
+	$cmds
+	*) help;;
+esac"
diff --git a/package/base-files/files/etc/resolv.conf b/package/base-files/files/etc/resolv.conf
new file mode 100644
index 0000000..9617eac
--- /dev/null
+++ b/package/base-files/files/etc/resolv.conf
@@ -0,0 +1,2 @@
+nameserver 127.0.0.1
+search lan
diff --git a/package/base-files/files/etc/shells b/package/base-files/files/etc/shells
new file mode 100644
index 0000000..006aa38
--- /dev/null
+++ b/package/base-files/files/etc/shells
@@ -0,0 +1 @@
+/bin/ash
diff --git a/package/base-files/files/etc/sysctl.conf b/package/base-files/files/etc/sysctl.conf
new file mode 100644
index 0000000..e60038c
--- /dev/null
+++ b/package/base-files/files/etc/sysctl.conf
@@ -0,0 +1,12 @@
+kernel.panic=3
+net.ipv4.conf.default.arp_ignore=1
+net.ipv4.conf.all.arp_ignore=1
+net.ipv4.ip_forward=1
+net.ipv4.icmp_echo_ignore_broadcasts=1
+net.ipv4.icmp_ignore_bogus_error_responses=1
+net.ipv4.tcp_fin_timeout=30
+net.ipv4.tcp_keepalive_time=120
+net.ipv4.tcp_syncookies=1
+net.ipv4.tcp_timestamps=0
+net.ipv4.ip_conntrack_tcp_timeouts="300 43200 120 60 120 120 10 60 30 120"
+net.ipv4.ip_conntrack_udp_timeouts="60 180"
diff --git a/package/base-files/files/lib/config/template.awk b/package/base-files/files/lib/config/template.awk
new file mode 100644
index 0000000..faae8b3
--- /dev/null
+++ b/package/base-files/files/lib/config/template.awk
@@ -0,0 +1,42 @@
+# Copyright (C) 2006 OpenWrt.org
+
+{
+	line=$0
+	gsub(/^[ \t]*/, "")
+	gsub(/[ \t]*$/, "")
+}
+
+$1 == "@define" {
+	v[$2] = $3
+}
+
+$1 == "@ifdef" {
+	if_open = 1
+	if (v[$2] != "") noprint = 0
+	else noprint = 1
+}
+
+$1 == "@ifndef" {
+	if_open = 1
+	if (v[$2] != "") noprint = 1
+	else noprint = 0
+}
+
+$1 == "@else" {
+	if (noprint == 1) noprint = 0
+	else noprint = 1
+}
+
+($1 !~ /^@[a-zA-Z0-9_]/) && (noprint != 1) {
+	n=split(line "@@", a, /@@/)
+	for (i=1; i<=n; i++) {
+		if ((i % 2) == 1) printf "%s" a[i]
+		else printf "%s" v[a[i]]
+	}
+	print ""
+}
+
+$1 == "@endif" {
+	if_open = 0
+	noprint = 0
+}
diff --git a/package/base-files/files/lib/config/uci-update.awk b/package/base-files/files/lib/config/uci-update.awk
new file mode 100644
index 0000000..efa8758
--- /dev/null
+++ b/package/base-files/files/lib/config/uci-update.awk
@@ -0,0 +1,160 @@
+# Configuration update functions
+#
+# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
+# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+function read_file(filename,  result) {
+	while ((getline <filename) == 1) {
+		result = result $0 "\n"
+	}
+	gsub(/\n*$/, "", result)
+	return result
+}
+
+function cmd2option(str,  tmp) {
+	if (match(str,"=")!=0) {
+		res = "\toption " substr(str,1,RSTART-1) "\t'" substr(str,RSTART+1) "'"
+	} else {
+		res= ""
+	}
+	return res
+}
+
+function cmd2config(atype,  aname) {
+	return "config \"" atype "\" \"" aname "\""
+}
+
+function update_config(cfg, update,  \
+  lines, line, l, n, i, i2, section, scnt, remove, tmp, aidx, rest) {
+	scnt = 1
+	linecnt=split(cfg "\n", lines, "\n")
+
+	cfg = ""
+	for (n = 1; n < linecnt; n++) {
+		# stupid parser for quoted arguments (e.g. for the type string).
+		# not to be used to gather variable values (backslash escaping doesn't work)
+		line = lines[n]
+		gsub(/^[ \t]*/, "", line)
+		gsub(/#.*$/, "", line)
+		i2 = 1
+		delete l
+		rest = line
+        	while (length(rest)) {
+			if (match(rest, /[ \t\"]+/)) {
+				if (RSTART>1) {
+					l[i2] = substr(rest,1,RSTART-1)
+					i2++
+				}
+				aidx=index(rest,"\"")
+				if (aidx>=RSTART && aidx<=RSTART+RLENGTH) {
+					rest=substr(rest,aidx+1)
+					# find the end of the string
+					match(rest,/\"/)
+					l[i2]=substr(rest,1,RSTART-1)
+					i2++
+				}
+				rest=substr(rest,RSTART+RLENGTH)
+			} else {
+				l[i2] = rest
+				i2++
+				rest = ""
+			}
+		}
+		line = lines[n]
+		
+		# when a command wants to set a config value for the current
+		# section and a blank line is encountered before an option with
+		# the same name, insert it here to maintain some coherency between
+		# manually and automatically created option lines
+		# if an option with the same name appears after this point, simply
+		# ignore it, because it is already set.
+		if ((section != "") && (l[1] != "option")) {
+			if (line ~ /^[ \t]*$/) {
+				if (update ~ "^" section "\\.") {
+					gsub("^" section ".", "", update)
+					cfg = cfg cmd2option(update) "\n"
+					gsub(/=.*$/, "", update)
+					update = "-" section "." update
+				}
+			}
+		}
+
+		if (l[1] == "config") {
+			# look for all unset values
+			if (section != "") {
+				flag=0
+				if (update ~ "^" section "\\.") {
+					flag=1
+					gsub("^" section ".", "", update)
+					cfg = cfg cmd2option(update) "\n"
+					
+					update = "-" section "." update
+				} 
+				if (flag!=0) cfg = cfg "\n"
+			}
+			
+			remove = ""
+			section = l[3]
+			if (!length(section)) {
+				section = "cfg" scnt
+			}	
+			scnt++
+			if (update == "-" section) {
+				remove = "section"
+				update = ""
+			} else if (update ~ "^@" section "=") {
+				update = ""
+			} else if (update ~ "^&" section "=") {
+				gsub("^&" section "=", "", update)
+				line = cmd2config(l[2],update) 
+				update = ""
+			}
+		}
+		if (remove == "option") remove = ""
+		if (l[1] == "option") {
+			if (update ~ "^-" section "\\." l[2] "$") remove = "option"
+			# if a supplied config value already exists, replace the whole line
+			if (match(update, "^" section "." l[2] "=")) {
+				gsub("^" section ".", "", update)
+				line = cmd2option(update)
+				update = ""
+			}
+		}
+		if (remove == "") cfg = cfg line "\n"
+	}
+	
+	# any new options for the last section??
+	if (section != "") {
+		if (update ~ "^" section "\\.") {
+			gsub("^" section ".", "", update)
+			cfg = cfg cmd2option(update) "\n"
+
+			update = "-" section "." update
+		} 
+	}
+
+	if (update ~ "^@") {
+		# new section
+		section = stype = substr(update,2)
+		gsub(/=.*$/,"",section)
+		gsub(/^.*=/,"",stype)
+		cfg = cfg "\nconfig \"" stype "\" \"" section "\"\n"
+	}
+
+	return cfg
+}
diff --git a/package/base-files/files/lib/config/uci.sh b/package/base-files/files/lib/config/uci.sh
new file mode 100755
index 0000000..957c1bb
--- /dev/null
+++ b/package/base-files/files/lib/config/uci.sh
@@ -0,0 +1,139 @@
+#!/bin/sh
+# Shell script defining macros for manipulating config files
+#
+# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
+# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+uci_load() {
+	local PACKAGE="$1"
+	config_load "$PACKAGE"
+	local PACKAGE_BASE="$(basename "$PACKAGE")"
+	[ -f "/tmp/.uci/${PACKAGE_BASE}" ] && {
+		. "/tmp/.uci/${PACKAGE_BASE}"
+		config_cb
+	}
+}
+
+uci_do_update() {
+	local FILENAME="$1"
+	local UPDATE="$2"
+	awk -f /lib/config/uci-update.awk -f - <<EOF
+BEGIN {
+	config = read_file("$FILENAME")
+	$UPDATE
+	print config
+}
+EOF
+}
+
+uci_add_update() {
+	local PACKAGE="$1"
+	local UPDATE="$2"
+	local PACKAGE_BASE="$(basename "$PACKAGE")"
+	
+	# FIXME: add locking?
+	mkdir -p "/tmp/.uci"
+	echo "$UPDATE" >> "/tmp/.uci/${PACKAGE_BASE}"
+}
+
+uci_set() {
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local OPTION="$3"
+	local VALUE="$4"
+
+	( # spawn a subshell so you don't mess up the current environment
+		uci_load "$PACKAGE"
+		config_get type "$CONFIG" TYPE
+		[ -z "$type" ]
+	) || uci_add_update "$PACKAGE" "CONFIG_SECTION='$CONFIG'${N}option '$OPTION' '$VALUE'"
+}
+
+uci_add() {
+	local PACKAGE="$1"
+	local TYPE="$2"
+	local CONFIG="$3"
+
+	uci_add_update "$PACKAGE" "config '$TYPE' '$CONFIG'"
+}
+
+uci_rename() {
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local VALUE="$3"
+
+	uci_add_update "$PACKAGE" "config_rename '$CONFIG' '$VALUE'"
+}
+
+uci_remove() {
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local OPTION="$3"
+
+	if [ -z "$OPTION" ]; then
+		uci_add_update "$PACKAGE" "config_clear '$CONFIG'"
+	else
+		uci_add_update "$PACKAGE" "config_unset '$CONFIG' '$OPTION'"
+	fi
+}
+
+uci_commit() {
+	local PACKAGE="$1"
+	local PACKAGE_BASE="$(basename "$PACKAGE")"
+	
+	mkdir -p /tmp/.uci
+	lock "/tmp/.uci/$PACKAGE_BASE.lock"
+	[ -f "/tmp/.uci/$PACKAGE_BASE" ] && (
+		updatestr=""
+		
+		# replace handlers
+		config() {
+			append updatestr "config = update_config(config, \"@$2=$1\")" "$N"
+		}
+		option() {
+			append updatestr "config = update_config(config, \"$CONFIG_SECTION.$1=$2\")" "$N"
+		}
+		config_rename() {
+			append updatestr "config = update_config(config, \"&$1=$2\")" "$N"
+		}
+		config_unset() {
+			append updatestr "config = update_config(config, \"-$1.$2\")" "$N"
+		}
+		config_clear() {
+			append updatestr "config = update_config(config, \"-$1\")" "$N"
+		}
+		
+		. "/tmp/.uci/$PACKAGE_BASE"
+
+		# completely disable handlers so that they don't get in the way
+		config() {
+			return 0
+		}
+		option() {
+			return 0
+		}
+		
+		config_load "$PACKAGE" || CONFIG_FILENAME="$ROOT/etc/config/$PACKAGE_BASE"
+		uci_do_update "$CONFIG_FILENAME" "$updatestr" > "/tmp/.uci/$PACKAGE_BASE.new" && {
+			mv -f "/tmp/.uci/$PACKAGE_BASE.new" "$CONFIG_FILENAME" && \
+			rm -f "/tmp/.uci/$PACKAGE_BASE"
+		} 
+	)
+	lock -u "/tmp/.uci/$PACKAGE_BASE.lock"
+}
+
+
diff --git a/package/base-files/files/lib/network/config.sh b/package/base-files/files/lib/network/config.sh
new file mode 100755
index 0000000..90f5bf7
--- /dev/null
+++ b/package/base-files/files/lib/network/config.sh
@@ -0,0 +1,171 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+# DEBUG="echo"
+
+find_config() {
+	local iftype device iface ifaces ifn
+	for ifn in $interfaces; do
+		config_get iftype "$ifn" type
+		config_get iface "$ifn" ifname
+		case "$iftype" in
+			bridge) config_get ifaces "$ifn" ifnames;;
+		esac
+		config_get device "$ifn" device
+		for ifc in $device $iface $ifaces; do
+			[ "$ifc" = "$1" ] && {
+				echo "$ifn"
+				return 0
+			}
+		done
+	done
+
+	return 1;
+}
+
+scan_interfaces() {
+	local mode iftype iface ifname device
+	interfaces=
+	config_cb() {
+		case "$1" in
+			interface)
+				config_set "$2" auto 1
+			;;
+		esac
+		config_get iftype "$CONFIG_SECTION" TYPE
+		case "$iftype" in
+			interface)
+				config_get proto "$CONFIG_SECTION" proto
+				append interfaces "$CONFIG_SECTION"
+				config_get iftype "$CONFIG_SECTION" type
+				config_get ifname "$CONFIG_SECTION" ifname
+				config_set "$CONFIG_SECTION" device "$ifname"
+				case "$iftype" in
+					bridge)
+						config_set "$CONFIG_SECTION" ifnames "$ifname"
+						config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
+					;;
+				esac
+				( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$CONFIG_SECTION'"
+			;;
+		esac
+	}
+	config_load network
+}
+
+add_vlan() {
+	local vif="${1%\.*}"
+	
+	[ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
+		ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
+		$DEBUG vconfig add "$vif" "${1##*\.}"
+	}
+}
+
+setup_interface() {
+	local iface="$1"
+	local config="$2"
+	local proto
+
+	[ -n "$config" ] || {
+		config=$(find_config "$iface")
+		[ "$?" = 0 ] || return 1
+	}
+
+	proto="${3:-$(config_get "$config" proto)}"
+	config_get iftype "$config" type
+	
+	ifconfig "$iface" 2>/dev/null >/dev/null && {
+		# make sure the interface is removed from any existing bridge
+		unbridge "$iface"
+	}
+
+	# Setup VLAN interfaces
+	add_vlan "$iface"
+
+	# Setup bridging
+	case "$iftype" in
+		bridge)
+			ifconfig "$iface" up 2>/dev/null >/dev/null
+			ifconfig "br-$config" 2>/dev/null >/dev/null && {
+				$DEBUG brctl addif "br-$config" "$iface"
+				return 0
+			} || {
+				$DEBUG brctl addbr "br-$config"
+				$DEBUG brctl setfd "br-$config" 0
+				$DEBUG brctl addif "br-$config" "$iface"
+				iface="br-$config"
+			}
+		;;
+	esac
+	
+	# Interface settings
+	config_get mtu "$config" mtu
+	$DEBUG ifconfig "$iface" ${mtu:+mtu $mtu} up
+
+	pidfile="/var/run/$iface.pid"
+	case "$proto" in
+		static)
+			config_get ipaddr "$config" ipaddr
+			config_get netmask "$config" netmask
+			[ -z "$ipaddr" -o -z "$netmask" ] && return 1
+			
+			config_get ip6addr "$config" ip6addr
+			config_get gateway "$config" gateway
+			config_get dns "$config" dns
+			
+			$DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask"
+			[ -z "$gateway" ] || route add default gw "$gateway"
+			[ -z "$dns" -o -f /tmp/resolv.conf ] || {
+				for ns in $dns; do
+					echo "nameserver $ns" >> /tmp/resolv.conf
+				done
+			}
+
+			env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug "iface" &
+		;;
+		dhcp)
+			# prevent udhcpc from starting more than once
+			lock "/var/lock/dhcp-$iface"
+			pid="$(cat "$pidfile" 2>/dev/null)"
+			[ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null && {
+				lock -u "/var/lock/dhcp-$iface"
+				return 0
+			}
+
+			config_get ipaddr "$config" ipaddr
+			config_get netmask "$config" netmask
+			config_get hostname "$config" hostname
+			config_get proto1 "$config" proto
+
+			[ -z "$ipaddr" ] || \
+				$DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
+
+			# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
+			[ "$proto1" != "$proto" ] && dhcpopts="-n -q"
+			$DEBUG eval udhcpc -t 0 -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} -b -p "$pidfile" ${dhcpopts:- -R &}
+			lock -u "/var/lock/dhcp-$iface"
+		;;
+		*)
+			if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
+				eval "setup_interface_$proto '$iface' '$config' '$proto'" 
+			else
+				echo "Interface type $proto not supported."
+				return 1
+			fi
+		;;
+	esac
+}
+
+unbridge() {
+	local dev="$1"
+	local brdev
+
+	brctl show | grep "$dev" >/dev/null && {
+		# interface is still part of a bridge, correct that
+
+		for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do
+			brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null
+		done
+	}
+}
diff --git a/package/base-files/files/rom/note b/package/base-files/files/rom/note
new file mode 100644
index 0000000..1746eb0
--- /dev/null
+++ b/package/base-files/files/rom/note
@@ -0,0 +1,3 @@
+SQUASHFS USERS:
+After firstboot has been run, / will be jffs2 and /rom will be squashfs
+(* except when in failsafe)
diff --git a/package/base-files/files/sbin/hotplug b/package/base-files/files/sbin/hotplug
new file mode 100755
index 0000000..b1b6f97
--- /dev/null
+++ b/package/base-files/files/sbin/hotplug
@@ -0,0 +1,26 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+# bypass the normal hotplug path for firmware loading
+# would otherwise cause problems with drivers like bcm43xx
+[ "$1" = "firmware" -a "$ACTION" = "add" ] && {
+	[ -f "/lib/firmware/$FIRMWARE" ] && {
+		echo 1 > "/sys$DEVPATH/loading"
+		cp "/lib/firmware/$FIRMWARE" "/sys$DEVPATH/data"
+		echo 0 > "/sys$DEVPATH/loading"
+	}
+	exit 0
+}
+
+. /etc/functions.sh
+
+PATH=/bin:/sbin:/usr/bin:/usr/sbin
+LOGNAME=root
+USER=root
+export PATH LOGNAME USER
+
+[ \! -z "$1" -a -d /etc/hotplug.d/$1 ] && {
+	for script in $(ls /etc/hotplug.d/$1/* 2>&-); do (
+		[ -f $script ] && . $script
+	); done
+}
diff --git a/package/base-files/files/sbin/ifdown b/package/base-files/files/sbin/ifdown
new file mode 100755
index 0000000..26d0e62
--- /dev/null
+++ b/package/base-files/files/sbin/ifdown
@@ -0,0 +1,55 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+[ $# = 0 ] && { echo "  $0 <group>"; exit; }
+. /etc/functions.sh
+include /lib/network
+scan_interfaces
+
+cfg=$1
+debug "### ifdown $cfg ###"
+
+config_get proto "$cfg" proto
+[ -z "$proto" ] && { echo "interface not found."; exit; }
+
+config_get iface "$cfg" device
+[ "$proto" = "static" ] && {
+	env -i ACTION="ifdown" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug "iface" &
+}
+
+# call interface stop handler
+( type "stop_interface_$proto" ) >/dev/null 2>/dev/null && eval "stop_interface_$proto '$cfg'"
+
+# make sure all locks are removed
+for lock in "/var/lock/dhcp-$iface" "/var/lock/ppp-$iface"; do
+	[ -f "$lock" ] && {
+		lock -u "$lock"
+		sleep 1
+	}
+done
+
+# kill active ppp daemon and other processes
+config_get ifname "$cfg" ifname
+pids="$(head -n1 -q /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid 2>/dev/null)"
+for pid in $pids; do 
+	[ -d "/proc/$pid" ] && {
+		kill $pid
+		[ -d "/proc/$pid" ] && {
+			sleep 1
+			kill -9 $pid 2>/dev/null >/dev/null
+		}
+	}
+done
+rm -f /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid
+
+config_get ifname "$cfg" ifname
+config_get device "$cfg" ifname
+
+[ ."$device" != ."$ifname" ] || device=
+for dev in $ifname $device; do
+	ifconfig "$ifname" 0.0.0.0 down >/dev/null 2>/dev/null
+done
+
+config_get iftype "$cfg" type
+[ "$iftype" = "bridge" ] && brctl delbr "$ifname" >/dev/null 2>/dev/null
+
diff --git a/package/base-files/files/sbin/ifup b/package/base-files/files/sbin/ifup
new file mode 100755
index 0000000..81ec2c0
--- /dev/null
+++ b/package/base-files/files/sbin/ifup
@@ -0,0 +1,11 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+. /sbin/ifdown "$@"
+
+config_get iftype "$1" type
+config_get ifname "$1" device
+
+for dev in $ifname; do
+	setup_interface "$dev" "$1"
+done
diff --git a/package/base-files/files/sbin/mount_root b/package/base-files/files/sbin/mount_root
new file mode 100755
index 0000000..81660f0
--- /dev/null
+++ b/package/base-files/files/sbin/mount_root
@@ -0,0 +1,10 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+mount none /proc -t proc
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
+mount -t sysfs none /sys 2>&-
+mount -o remount,rw /dev/root /
diff --git a/package/base-files/files/sbin/wifi b/package/base-files/files/sbin/wifi
new file mode 100755
index 0000000..d877c73
--- /dev/null
+++ b/package/base-files/files/sbin/wifi
@@ -0,0 +1,116 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+. /etc/functions.sh
+
+find_net_config() {(
+	local vif="$1"
+	local cfg
+	local ifname
+
+	config_get cfg "$vif" network
+
+	[ -z "$cfg" ] && {
+		include /lib/network
+		scan_interfaces
+
+		config_get ifname "$vif" ifnamea
+
+		cfg="$(find_config "$ifname")"
+	}
+	[ -z "$cfg" ] && return 0
+	echo "$cfg"
+)}
+
+
+bridge_interface() {(
+	local cfg="$1"
+	[ -z "$cfg" ] && return 0
+
+	include /lib/network
+	scan_interfaces
+
+	config_get iftype "$cfg" type
+	[ "$iftype" = bridge ] && config_get "$cfg" ifname
+)}
+
+
+wifi_up() {
+	for device in ${2:-$DEVICES}; do (
+		config_get iftype "$device" type
+		if eval "type enable_$iftype" 2>/dev/null >/dev/null; then
+			eval "scan_$iftype '$device'"
+			eval "enable_$iftype '$device'" || echo "$device($iftype): Setup failed"
+		else
+			echo "$device($iftype): Interface type not supported"
+		fi
+	); done
+}
+
+wifi_down() {
+	for device in ${2:-$DEVICES}; do (
+		config_get iftype "$device" type
+		if eval "type disable_$iftype" 2>/dev/null >/dev/null; then
+			eval "scan_$iftype '$device'"
+			eval "disable_$iftype '$device'" || echo "$device($iftype): Disable failed"
+		else
+			echo "$device($iftype): Interface type not supported"
+		fi
+	); done
+}
+
+wifi_detect() {
+	for driver in ${2:-$DRIVERS}; do (
+		if eval "type detect_$driver" 2>/dev/null >/dev/null; then
+			eval "detect_$driver" || echo "$driver: Detect failed" >&2
+		else
+			echo "$driver: Hardware detection not supported" >&2
+		fi
+	); done
+}
+
+start_net() {(
+	local iface="$1"
+	local config="$2"
+
+	include /lib/network
+	scan_interfaces
+	setup_interface "$1" "$2"
+)}
+
+config_get_bool() {
+	local _tmp
+	config_get "$1" "$2" "$3"
+	eval "_tmp=\$$1"
+	case "$_tmp" in
+		1|on|enabled) eval "$1=1";;
+		0|off|disabled) eval "$1=0";;
+		*) eval "$1=${4:-0}";;
+	esac
+}
+
+config_cb() {
+	config_get TYPE "$CONFIG_SECTION" TYPE
+	case "$TYPE" in
+		wifi-device)
+			append DEVICES "$CONFIG_SECTION"
+		;;
+		wifi-iface)
+			config_get device "$CONFIG_SECTION" device
+			config_get vifs "$device" vifs 
+			append vifs "$CONFIG_SECTION"
+			config_set "$device" vifs "$vifs"
+		;;
+	esac
+}
+
+DEVICES=
+DRIVERS=
+config_load wireless
+include /lib/wifi
+
+case "$1" in
+	down) wifi_down "$2";;
+	detect) wifi_detect "$2";;
+	*) wifi_up "$2";;
+esac
diff --git a/package/base-files/files/usr/lib/common.awk b/package/base-files/files/usr/lib/common.awk
new file mode 100644
index 0000000..c5ce680
--- /dev/null
+++ b/package/base-files/files/usr/lib/common.awk
@@ -0,0 +1,68 @@
+# Copyright (C) 2006 OpenWrt.org
+
+function portstr(type, str) {
+	gsub(/-/, ":", str)
+	if (insmod_mport != 1) {
+		print "insmod ipt_multiport >&- 2>&-"
+		insmod_mport = 1
+	}
+	if (type == "src") return " -m multiport --sports " str
+	else return " -m multiport --dports " str
+}
+
+function str2ipt(str) {
+	str2data(str)
+	_cmd = ""
+	if (_l["src"] != "") _cmd = _cmd " -s " _l["src"]
+	if (_l["dest"] != "") _cmd = _cmd " -d " _l["dest"]
+	if (_l["proto"] != "") {
+		_cmd = _cmd " -p " _l["proto"]
+	}
+	# scripts need to check for proto="" and emit two rules in that case
+	if ((_l["proto"] == "") || (_l["proto"] == "tcp") || (_l["proto"] == "udp")) {
+		if (_l["sport"] != "") _cmd = _cmd portstr("src", _l["sport"])
+		if (_l["dport"] != "") _cmd = _cmd portstr("dest", _l["dport"])
+	}
+	if (_l["layer7"] != "") {
+		if (insmod_l7 != 1) {
+			print "insmod ipt_layer7 >&- 2>&-"
+			insmod_l7 = 1
+		}
+		_cmd = _cmd " -m layer7 --l7proto " _l["layer7"]
+	}
+	return _cmd
+}
+
+function str2data(str) {
+	delete _l
+	_n = split(str, _o, "[\t ]")
+	for (_i = 1; _i <= _n; _i++) {
+		_n2 = split(_o[_i], _c, "=")
+		if (_n2 == 2) _l[_c[1]] = _c[2]
+	}
+}
+
+function bitcount(c) {
+	c=and(rshift(c, 1),0x55555555)+and(c,0x55555555)
+	c=and(rshift(c, 2),0x33333333)+and(c,0x33333333)
+	c=and(rshift(c, 4),0x0f0f0f0f)+and(c,0x0f0f0f0f)
+	c=and(rshift(c, 8),0x00ff00ff)+and(c,0x00ff00ff)
+	c=and(rshift(c,16),0x0000ffff)+and(c,0x0000ffff)
+	return c
+}
+
+function validate_netmask(nm) {
+	return and(-nm,compl(nm))
+}
+
+function ip2int(ip) {
+	for (ret=0,n=split(ip,a,"\."),x=1;x<=n;x++) ret=or(lshift(ret,8),a[x]) 
+	return ret
+}
+
+function int2ip(ip,ret,x) {
+	ret=and(ip,255)
+	ip=rshift(ip,8)
+	for(;x<3;ret=and(ip,255)"."ret,ip=rshift(ip,8),x++);
+	return ret
+}
diff --git a/package/base-files/files/usr/share/udhcpc/default.script b/package/base-files/files/usr/share/udhcpc/default.script
new file mode 100755
index 0000000..53c8faf
--- /dev/null
+++ b/package/base-files/files/usr/share/udhcpc/default.script
@@ -0,0 +1,57 @@
+#!/bin/sh
+[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
+. /etc/functions.sh
+include /lib/network
+
+RESOLV_CONF="/tmp/resolv.conf"
+
+hotplug_event() {
+	scan_interfaces
+	for ifc in $interfaces; do
+		config_get ifname $ifc ifname
+		[ "$ifname" = "$interface" ] || continue
+
+		config_get proto $ifc proto
+		[ "$proto" = "dhcp" ] || continue
+
+		env -i ACTION="$1" INTERFACE="$ifc" DEVICE="$ifname" PROTO=dhcp /sbin/hotplug iface
+	done
+}
+
+case "$1" in
+	deconfig)
+		ifconfig $interface 0.0.0.0
+		hotplug_event ifdown
+	;;
+	renew|bound)
+		ifconfig $interface $ip \
+		netmask ${subnet:-255.255.255.0} \
+		broadcast ${broadcast:-+}
+
+		if [ -n "$router" ] ; then
+			echo "deleting routers"
+			while route del default gw 0.0.0.0 dev $interface >&- 2>&- ; do :; done
+					
+			for i in $router ; do
+				echo "adding router $i"
+				route add default gw $i dev $interface
+			done
+		fi
+		
+		[ -n "$dns" ] && {
+			echo -n > $RESOLV_CONF
+			${domain:+echo search $domain} >> $RESOLV_CONF
+			for i in $dns ; do
+				echo "adding dns $i"
+				echo "nameserver $i" >> $RESOLV_CONF
+			done
+		}
+		
+		hotplug_event ifup
+		
+		# user rules
+		[ -f /etc/udhcpc.user ] && . /etc/udhcpc.user
+	;;
+esac
+
+exit 0
-- 
cgit v1.1