From 16afa08d19b4f7bf256a89749e76ff8421ece013 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Mon, 14 Nov 2016 17:38:23 +0100 Subject: ar71xx: add support for COMFAST CF-E380AC v1 and v2 COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035. There are two versions of this model, with different RAM and U-Boot mtd partition sizes: - v1: 128 MB of RAM, 128 KB U-Boot image size - v2: 256 MB of RAM, 256 KB U-Boot image size Version number is available only inside vendor GUI, hardware and markings are the same. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 1x 10/100/1000 Mbps Ethernet, with PoE support - 128 or 256 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm - 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm - 6x internal antennas - 1x RGB LED, 1x button - UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB - external watchdog (Pericon Technology PT7A7514) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 2 ++ 1 file changed, 2 insertions(+) (limited to 'target/linux/ar71xx/base-files/lib/upgrade/platform.sh') diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index fa12870..87c9d8f 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -183,6 +183,8 @@ platform_check_image() { carambola2|\ cf-e316n-v2|\ cf-e320n-v2|\ + cf-e380ac-v1|\ + cf-e380ac-v2|\ cf-e520n|\ cf-e530n|\ dgl-5500-a1|\ -- cgit v1.1