From 58fc50f1b088a4bf89b2ce355fc8a4cef3dffcd2 Mon Sep 17 00:00:00 2001 From: Karol Dudek Date: Sun, 12 Feb 2017 18:34:36 +0100 Subject: ar71xx: add support for 8devices Lima board Lima is a module for the (IoE) internet of everything applications, based on Qualcomm/Atheros QCA4531. Specification: - 650/600/216 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 32 MB of FLASH - 2T2R 2.4 GHz - 2x 10/100 Mbps Ethernet - USB 2.0 Host - PCIe - UART for serial console - 14x GPIO Flash instruction: 1. Download lede-ar71xx-generic-lima-squashfs-sysupgrade.bin and rename it to 8dev_recovery.bin 2. Binary file copy to USB stick and plug into slot USB 3. Press S2 (reset) button 4. Press and hold the S1 button by 5 seconds 5. Wait ~40 seconds to complete recovery Tested on: - Lima development kit Signed-off-by: Karol Dudek --- target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 4c00ea5..44f754c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1822,6 +1822,17 @@ config ATH79_MACH_CARAMBOLA2 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_LIMA + bool "8devices Lima board" + select SOC_QCA953X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_M25P80 + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_DEV_ETH + config ATH79_MACH_CF_E316N_V2 bool "COMFAST CF-E316N v2 support" select SOC_AR934X -- cgit v1.1