From 8390b7dc9b1dd45dfc3a605c92ba3ff03ff0ff59 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 17 Dec 2010 17:10:01 +0000 Subject: ar71xx: UBNT Secondary MAC address duplicate fix There is Secondary MAC address duplicate problem with some UBNT RouterStation and RouterStation Pro HW batches as Primary MAC addresses are not increased by 2 per device in board data. Fix is to use 'Locally Administrated bit' for Secondary MAC address instead of increasing Primary MAC addresses by 1 which could overlap with other device Primary MAC address. Signed-off-by: Kestutis Barkauskas SVN-Revision: 24643 --- target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'target/linux/ar71xx/files') diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c index feb913a..38095b2 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c @@ -133,6 +133,17 @@ static void __init ubnt_generic_setup(void) pb42_pci_init(); } +/* + * There is Secondary MAC address duplicate problem with some UBNT HW batches. + * Do not increase Secondary MAC address by 1 but do workaround + * with 'Locally Administrated' bit. + */ +static void ubnt_init_secondary_mac(unsigned char *mac_base) +{ + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_base, 0); + ar71xx_eth1_data.mac_addr[0] |= 0x02; +} + #define UBNT_RS_WAN_PHYMASK (1 << 20) #define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19)) @@ -146,7 +157,7 @@ static void __init ubnt_rs_setup(void) ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ubnt_init_secondary_mac(ar71xx_mac_base); ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ar71xx_eth1_data.speed = SPEED_100; ar71xx_eth1_data.duplex = DUPLEX_FULL; @@ -177,7 +188,7 @@ static void __init ubnt_rspro_setup(void) ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ubnt_init_secondary_mac(ar71xx_mac_base); ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; ar71xx_eth1_data.speed = SPEED_1000; -- cgit v1.1