From 9b3c0d11a2410c7e21877b165a1f994f956e594e Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 26 Apr 2013 17:00:52 +0000 Subject: ar71xx: Add Netgear WNR2000v3 support Network connectivity works fine (LAN and WAN). For GPIOs, only pwr led and the green wan leds are supported for now. Signed-off-by: Mathieu Olivari Signed-off-by: Gabor Juhos SVN-Revision: 36459 --- .../ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c | 91 ++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c (limited to 'target/linux/ar71xx/files') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c new file mode 100644 index 0000000..bb7b24c --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c @@ -0,0 +1,91 @@ +/* + * NETGEAR WNR2000v3 board support + * + * Copytight (C) 2013 Mathieu Olivari + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * Copyright (C) 2008-2009 Andy Boyett + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define WNR2000V3_GPIO_LED_WAN_GREEN 0 +#define WNR2000V3_GPIO_LED_LAN1_AMBER 1 +#define WNR2000V3_GPIO_LED_LAN4_AMBER 12 +#define WNR2000V3_GPIO_LED_PWR_GREEN 14 +#define WNR2000V3_GPIO_BTN_WPS 11 + +#define WNR2000V3_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WNR2000V3_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V3_KEYS_POLL_INTERVAL) + +#define WNR2000V3_MAC0_OFFSET 0 +#define WNR2000V3_MAC1_OFFSET 6 +#define WNR2000V3_PCIE_CALDATA_OFFSET 0x1000 + +static struct gpio_led wnr2000v3_leds_gpio[] __initdata = { + { + .name = "wnr2000v3:green:power", + .gpio = WNR2000V3_GPIO_LED_PWR_GREEN, + .active_low = 1, + }, { + .name = "wnr2000v3:green:wan", + .gpio = WNR2000V3_GPIO_LED_WAN_GREEN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wnr2000v3_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000V3_GPIO_BTN_WPS, + } +}; + +static void __init wnr2000v3_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V3_MAC0_OFFSET, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V3_MAC1_OFFSET, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v3_leds_gpio), + wnr2000v3_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WNR2000V3_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wnr2000v3_gpio_keys), + wnr2000v3_gpio_keys); + + ap91_pci_init(art + WNR2000V3_PCIE_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_WNR2000_V3, "WNR2000V3", "NETGEAR WNR2000 V3", wnr2000v3_setup); -- cgit v1.1