From 3959110c5b8b7b9f757d547dc01bf226f2bd1e34 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Fri, 31 Mar 2017 13:37:31 +0200 Subject: ar71xx: add support for ALFA Network AP121F ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/image/generic.mk | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'target/linux/ar71xx/image') diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index d978dec..e11a899 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -1,3 +1,16 @@ +define Device/ap121f + DEVICE_TITLE := ALFA Network AP121F + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage -swconfig + BOARDNAME := AP121F + IMAGE_SIZE := 16064k + CONSOLE := ttyATH0,115200 + MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) + SUPPORTED_DEVICES := ap121f + IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += ap121f + define Device/ap90q DEVICE_TITLE := YunCore AP90Q BOARDNAME = AP90Q -- cgit v1.1