From af015f956c35717909247a5732f6862d3de1476f Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 22 Jan 2012 22:38:19 +0000 Subject: ar71xx: add initial support for 3.2 Tested on the following boards: ALFA AP96 TL-MR3220 v1 TL-WR1043ND v1 TL-WR2543ND v1 TL-WR703N v1 TL-WR741ND v1 TL-WR741ND v4 WNDR3700 v1 WZR-HP-G300NH SVN-Revision: 29868 --- .../patches-3.2/433-spi-rb4xx-cpld-driver.patch | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch (limited to 'target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch') diff --git a/target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch new file mode 100644 index 0000000..c406072 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -441,6 +441,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on ATH79_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx. + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o + obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o + spi-s3c24xx-hw-y := spi-s3c24xx.o + spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o -- cgit v1.1