From bb39b8d99aae1f7eb13a97bd874838da91080de6 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 28 Feb 2014 20:30:08 +0000 Subject: brcm2708: update against latest rpi-3.10.y branch Update our copies of the brcm2708 patches to the latest rpi-3.10-y rebased against linux-3.10.y stable (3.10.32). This should hopefully make it easier for us in the future to leverage the raspberry/rpi-* branches. Signed-off-by: Florian Fainelli SVN-Revision: 39770 --- .../patches-3.10/013-bcm2835-hwmon-driver.patch | 251 --------------------- 1 file changed, 251 deletions(-) delete mode 100644 target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch (limited to 'target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch') diff --git a/target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch b/target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch deleted file mode 100644 index 9177f6e..0000000 --- a/target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch +++ /dev/null @@ -1,251 +0,0 @@ ---- /dev/null -+++ b/drivers/hwmon/bcm2835-hwmon.c -@@ -0,0 +1,219 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MODULE_NAME "bcm2835_hwmon" -+ -+/*#define HWMON_DEBUG_ENABLE*/ -+ -+#ifdef HWMON_DEBUG_ENABLE -+#define print_debug(fmt,...) printk(KERN_INFO "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) -+#else -+#define print_debug(fmt,...) -+#endif -+#define print_err(fmt,...) printk(KERN_ERR "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__) -+#define print_info(fmt,...) printk(KERN_INFO "%s: "fmt"\n", MODULE_NAME, ##__VA_ARGS__) -+ -+#define VC_TAG_GET_TEMP 0x00030006 -+#define VC_TAG_GET_MAX_TEMP 0x0003000A -+ -+/* --- STRUCTS --- */ -+struct bcm2835_hwmon_data { -+ struct device *hwmon_dev; -+}; -+ -+/* tag part of the message */ -+struct vc_msg_tag { -+ uint32_t tag_id; /* the tag ID for the temperature */ -+ uint32_t buffer_size; /* size of the buffer (should be 8) */ -+ uint32_t request_code; /* identifies message as a request (should be 0) */ -+ uint32_t id; /* extra ID field (should be 0) */ -+ uint32_t val; /* returned value of the temperature */ -+}; -+ -+/* message structure to be sent to videocore */ -+struct vc_msg { -+ uint32_t msg_size; /* simply, sizeof(struct vc_msg) */ -+ uint32_t request_code; /* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */ -+ struct vc_msg_tag tag; /* the tag structure above to make */ -+ uint32_t end_tag; /* an end identifier, should be set to NULL */ -+}; -+ -+typedef enum { -+ TEMP, -+ MAX_TEMP, -+} temp_type; -+ -+/* --- PROTOTYPES --- */ -+static ssize_t bcm2835_get_temp(struct device *dev, struct device_attribute *attr, char *buf); -+static ssize_t bcm2835_get_name(struct device *dev, struct device_attribute *attr, char *buf); -+ -+/* --- GLOBALS --- */ -+ -+static struct bcm2835_hwmon_data *bcm2835_data; -+static struct platform_driver bcm2835_hwmon_driver; -+ -+static SENSOR_DEVICE_ATTR(name, S_IRUGO,bcm2835_get_name,NULL,0); -+static SENSOR_DEVICE_ATTR(temp1_input,S_IRUGO,bcm2835_get_temp,NULL,TEMP); -+static SENSOR_DEVICE_ATTR(temp1_max,S_IRUGO,bcm2835_get_temp,NULL,MAX_TEMP); -+ -+static struct attribute* bcm2835_attributes[] = { -+ &sensor_dev_attr_name.dev_attr.attr, -+ &sensor_dev_attr_temp1_input.dev_attr.attr, -+ &sensor_dev_attr_temp1_max.dev_attr.attr, -+ NULL, -+}; -+ -+static struct attribute_group bcm2835_attr_group = { -+ .attrs = bcm2835_attributes, -+}; -+ -+/* --- FUNCTIONS --- */ -+ -+static ssize_t bcm2835_get_name(struct device *dev, struct device_attribute *attr, char *buf) -+{ -+ return sprintf(buf,"bcm2835_hwmon\n"); -+} -+ -+static ssize_t bcm2835_get_temp(struct device *dev, struct device_attribute *attr, char *buf) -+{ -+ struct vc_msg msg; -+ int result; -+ uint temp = 0; -+ int index = ((struct sensor_device_attribute*)to_sensor_dev_attr(attr))->index; -+ -+ print_debug("IN"); -+ -+ /* wipe all previous message data */ -+ memset(&msg, 0, sizeof msg); -+ -+ /* determine the message type */ -+ if(index == TEMP) -+ msg.tag.tag_id = VC_TAG_GET_TEMP; -+ else if (index == MAX_TEMP) -+ msg.tag.tag_id = VC_TAG_GET_MAX_TEMP; -+ else -+ { -+ print_debug("Unknown temperature message!"); -+ return -EINVAL; -+ } -+ -+ msg.msg_size = sizeof msg; -+ msg.tag.buffer_size = 8; -+ -+ /* send the message */ -+ result = bcm_mailbox_property(&msg, sizeof msg); -+ -+ /* check if it was all ok and return the rate in milli degrees C */ -+ if (result == 0 && (msg.request_code & 0x80000000)) -+ temp = (uint)msg.tag.val; -+ #ifdef HWMON_DEBUG_ENABLE -+ else -+ print_debug("Failed to get temperature!"); -+ #endif -+ print_debug("Got temperature as %u",temp); -+ print_debug("OUT"); -+ return sprintf(buf, "%u\n", temp); -+} -+ -+ -+static int bcm2835_hwmon_probe(struct platform_device *pdev) -+{ -+ int err; -+ -+ print_debug("IN"); -+ print_debug("HWMON Driver has been probed!"); -+ -+ /* check that the device isn't null!*/ -+ if(pdev == NULL) -+ { -+ print_debug("Platform device is empty!"); -+ return -ENODEV; -+ } -+ -+ /* allocate memory for neccessary data */ -+ bcm2835_data = kzalloc(sizeof(struct bcm2835_hwmon_data),GFP_KERNEL); -+ if(!bcm2835_data) -+ { -+ print_debug("Unable to allocate memory for hwmon data!"); -+ err = -ENOMEM; -+ goto kzalloc_error; -+ } -+ -+ /* create the sysfs files */ -+ if(sysfs_create_group(&pdev->dev.kobj, &bcm2835_attr_group)) -+ { -+ print_debug("Unable to create sysfs files!"); -+ err = -EFAULT; -+ goto sysfs_error; -+ } -+ -+ /* register the hwmon device */ -+ bcm2835_data->hwmon_dev = hwmon_device_register(&pdev->dev); -+ if (IS_ERR(bcm2835_data->hwmon_dev)) -+ { -+ err = PTR_ERR(bcm2835_data->hwmon_dev); -+ goto hwmon_error; -+ } -+ print_debug("OUT"); -+ return 0; -+ -+ /* error goto's */ -+ hwmon_error: -+ sysfs_remove_group(&pdev->dev.kobj, &bcm2835_attr_group); -+ -+ sysfs_error: -+ kfree(bcm2835_data); -+ -+ kzalloc_error: -+ -+ return err; -+ -+} -+ -+static int bcm2835_hwmon_remove(struct platform_device *pdev) -+{ -+ print_debug("IN"); -+ hwmon_device_unregister(bcm2835_data->hwmon_dev); -+ -+ sysfs_remove_group(&pdev->dev.kobj, &bcm2835_attr_group); -+ print_debug("OUT"); -+ return 0; -+} -+ -+/* Hwmon Driver */ -+static struct platform_driver bcm2835_hwmon_driver = { -+ .probe = bcm2835_hwmon_probe, -+ .remove = bcm2835_hwmon_remove, -+ .driver = { -+ .name = "bcm2835_hwmon", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Dorian Peake"); -+MODULE_DESCRIPTION("HW Monitor driver for bcm2835 chip"); -+ -+module_platform_driver(bcm2835_hwmon_driver); ---- a/drivers/hwmon/Kconfig -+++ b/drivers/hwmon/Kconfig -@@ -1537,6 +1537,16 @@ config SENSORS_MC13783_ADC - help - Support for the A/D converter on MC13783 and MC13892 PMIC. - -+config SENSORS_BCM2835 -+ depends on THERMAL_BCM2835=n -+ tristate "Broadcom BCM2835 HWMON Driver" -+ help -+ If you say yes here you get support for the hardware -+ monitoring features of the BCM2835 Chip -+ -+ This driver can also be built as a module. If so, the module -+ will be called bcm2835-hwmon. -+ - if ACPI - - comment "ACPI drivers" ---- a/drivers/hwmon/Makefile -+++ b/drivers/hwmon/Makefile -@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_W83L786NG) += w83l7 - obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o - obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o - obj-$(CONFIG_SENSORS_GSC) += gsc.o -+obj-$(CONFIG_SENSORS_BCM2835) += bcm2835-hwmon.o - - obj-$(CONFIG_PMBUS) += pmbus/ - -- cgit v1.1