From faa51b307cfdbec28f474b48699358064e0f99c7 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Fri, 1 Aug 2014 21:56:35 +0000
Subject: brcm63xx: switch to 3.14

Now that BB is branched off, we can now switch to 3.14 and start
breaking stuff again.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41941
---
 .../brcm63xx/patches-3.10/512-board_BTV2110.patch  | 75 ----------------------
 1 file changed, 75 deletions(-)
 delete mode 100644 target/linux/brcm63xx/patches-3.10/512-board_BTV2110.patch

(limited to 'target/linux/brcm63xx/patches-3.10/512-board_BTV2110.patch')

diff --git a/target/linux/brcm63xx/patches-3.10/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.10/512-board_BTV2110.patch
deleted file mode 100644
index c19e8d8..0000000
--- a/target/linux/brcm63xx/patches-3.10/512-board_BTV2110.patch
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -471,6 +471,64 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+	.name				= "V2110",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name           = "V2110:green:power",
-+			.gpio           = 0,
-+			.active_low     = 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name           = "V2110:red:power",
-+			.gpio           = 1,
-+			.active_low     = 1,
-+		},
-+		{
-+			.name           = "V2110:green:adsl",
-+			.gpio           = 2,
-+			.active_low     = 1,
-+		},
-+		{       .name           = "V2110:green:ppp",
-+			.gpio           = 3,
-+			.active_low     = 1,
-+		},
-+		{
-+			.name           = "V2110:green:wireless",
-+			.gpio           = 6,
-+			.active_low     = 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
-@@ -2034,6 +2092,7 @@ static const struct board_info __initcon
- 	&board_spw500v,
- 	&board_96348sv,
- 	&board_V2500V_BB,
-+	&board_V2110,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-- 
cgit v1.1