From b519908e848505ed671c13c45fbd5d29d9472264 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Fri, 4 Apr 2014 10:17:08 +0000
Subject: brcm63xx: update development kernel to linux 3.14

Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40380
---
 .../patches-3.14/532-board_96328a-1241N.patch      | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch

(limited to 'target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch')

diff --git a/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch
new file mode 100644
index 0000000..d13daf4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch
@@ -0,0 +1,84 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -182,6 +182,73 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_96328A_1241N = {
++	.name					= "96328A-1241N",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name			= "96328A-1241N:green:power",
++			.gpio			= 4,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "96328A-1241N:red:alarm",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "96328A-1241N:green:inet",
++			.gpio			= 3,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_96328A_1441N1 = {
+ 	.name					= "96328A-1441N1",
+ 	.expected_cpu_id			= 0x6328,
+@@ -3181,6 +3248,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
++	&board_96328A_1241N,
+ 	&board_96328A_1441N1,
+ 	&board_963281TAN,
+ 	&board_963281T_TEF,
-- 
cgit v1.1