From 44ef9f778994e1b9bd37c8525045b53d82b6a504 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Mon, 30 Jun 2014 13:34:34 +0000 Subject: brcm63xx: Add support for Comtrend WAP-5813n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds support for Comtrend WAP-5813n. Signed-off-by: Álvaro Fernández Rojas [jogo: refresh patches] Signed-off-by: Jonas Gorski SVN-Revision: 41421 --- .../patches-3.14/561-board_WAP-5813n.patch | 118 +++++++++++++++++++++ 1 file changed, 118 insertions(+) create mode 100644 target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch (limited to 'target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch') diff --git a/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch new file mode 100644 index 0000000..d70a55a --- /dev/null +++ b/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch @@ -0,0 +1,118 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -13,6 +13,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -4466,6 +4467,99 @@ static struct board_info __initdata boar + .has_ohci0 = 1, + .has_ehci0 = 1, + }; ++ ++static struct b53_platform_data WAP5813n_b53_pdata = { ++ .alias = "eth0", ++}; ++ ++static struct spi_board_info WAP5813n_spi_devices[] = { ++ { ++ .modalias = "b53-switch", ++ .max_speed_hz = 781000, ++ .bus_num = 0, ++ .chip_select = 0, ++ .platform_data = &WAP5813n_b53_pdata, ++ } ++}; ++ ++static struct board_info __initdata board_WAP5813n = { ++ .name = "96369R-1231N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_uart0 = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++ ++ .leds = { ++ { ++ .name = "WAP-5813n:green:power", ++ .gpio = 22, ++ .default_trigger = "default-on", ++ }, ++ { ++ .name = "WAP-5813n:red:power", ++ .gpio = 24, ++ }, ++ { ++ .name = "WAP-5813n:green:inet", ++ .gpio = 5, ++ }, ++ { ++ .name = "WAP-5813n:red:inet", ++ .gpio = 31, ++ }, ++ { ++ .name = "WAP-5813n:green:wps", ++ .gpio = 23, ++ .active_low = 1, ++ }, ++ }, ++ ++ .buttons = { ++ { ++ .desc = "wlan", ++ .gpio = 32, ++ .active_low = 1, ++ .type = EV_KEY, ++ .code = KEY_WLAN, ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, ++ }, ++ { ++ .desc = "reset", ++ .gpio = 34, ++ .active_low = 1, ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, ++ }, ++ { ++ .desc = "wps", ++ .gpio = 35, ++ .active_low = 1, ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, ++ }, ++ }, ++ ++ .spis = WAP5813n_spi_devices, ++ .num_spis = ARRAY_SIZE(WAP5813n_spi_devices), ++}; + #endif + + /* +@@ -4849,6 +4943,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, + &board_96368mvngr, ++ &board_WAP5813n, + #endif + #ifdef CONFIG_BCM63XX_CPU_63268 + &board_963268bu_p300, -- cgit v1.1