From 3b4fced67dad0b733d77f78205cfecfc0d654695 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 4 Feb 2013 10:19:50 +0000
Subject: bcm63xx: add support for linux 3.7

Based on 3.7.6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35481
---
 .../patches-3.7/519_board_CPVA502plus.patch        | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.7/519_board_CPVA502plus.patch

(limited to 'target/linux/brcm63xx/patches-3.7/519_board_CPVA502plus.patch')

diff --git a/target/linux/brcm63xx/patches-3.7/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.7/519_board_CPVA502plus.patch
new file mode 100644
index 0000000..6dd246b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.7/519_board_CPVA502plus.patch
@@ -0,0 +1,57 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1116,6 +1116,46 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_CPVA502plus = {
++	.name				= "CPVA502+",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "CPVA502+:green:phone",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA502+:green:link",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++	},
++};
++
+ #endif
+ 
+ /*
+@@ -2183,6 +2223,7 @@ static const struct board_info __initcon
+ 	&board_V2110,
+ 	&board_ct536_ct5621,
+ 	&board_96348A_122,
++	&board_CPVA502plus,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
-- 
cgit v1.1