From d18133b32d9a0a024ecbb5801d7d4b63d148c4c3 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 18 Mar 2012 22:06:08 +0000 Subject: generic: ar8216: rename chip field of struct ar8216 SVN-Revision: 30996 --- .../linux/generic/files/drivers/net/phy/ar8216.c | 40 +++++++++++----------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'target/linux/generic/files/drivers') diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index 4c5ddc3..13a874e 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -44,7 +44,7 @@ struct ar8216_priv { const struct net_device_ops *ndo_old; struct net_device_ops ndo; struct mutex reg_mutex; - int chip; + int chip_type; bool initialized; bool port4_phy; char buf[80]; @@ -477,7 +477,7 @@ ar8216_setup_port(struct ar8216_priv *priv, int port, u32 egress, u32 ingress, { u32 header; - if (priv->vlan && port == AR8216_PORT_CPU && priv->chip == AR8216) + if (priv->vlan && port == AR8216_PORT_CPU && priv->chip_type == AR8216) header = AR8216_PORT_CTRL_HEADER; else header = 0; @@ -583,7 +583,7 @@ ar8216_hw_apply(struct switch_dev *dev) ingress = AR8216_IN_PORT_ONLY; } - if (priv->chip == AR8236) + if (priv->chip_type == AR8236) ar8236_setup_port(priv, i, egress, ingress, portmask[i], pvid); else @@ -686,7 +686,7 @@ out: static void ar8216_init_globals(struct ar8216_priv *priv) { - switch (priv->chip) { + switch (priv->chip_type) { case AR8216: /* standard atheros magic */ priv->write(priv, 0x38, 0xc000050e); @@ -723,12 +723,12 @@ ar8216_init_port(struct ar8216_priv *priv, int port) if (port == AR8216_PORT_CPU) { priv->write(priv, AR8216_REG_PORT_STATUS(port), AR8216_PORT_STATUS_LINK_UP | - ((priv->chip == AR8316) ? + ((priv->chip_type == AR8316) ? AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) | AR8216_PORT_STATUS_TXMAC | AR8216_PORT_STATUS_RXMAC | - ((priv->chip == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) | - ((priv->chip == AR8316) ? AR8216_PORT_STATUS_TXFLOW : 0) | + ((priv->chip_type == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) | + ((priv->chip_type == AR8316) ? AR8216_PORT_STATUS_TXFLOW : 0) | AR8216_PORT_STATUS_DUPLEX); } else { priv->write(priv, AR8216_REG_PORT_STATUS(port), @@ -788,7 +788,7 @@ ar8216_id_chip(struct ar8216_priv *priv) u16 id; int i; - priv->chip = UNKNOWN; + priv->chip_type = UNKNOWN; val = ar8216_mii_read(priv, AR8216_REG_CTRL); if (val == ~0) @@ -809,14 +809,14 @@ ar8216_id_chip(struct ar8216_priv *priv) switch (id) { case 0x0101: - priv->chip = AR8216; + priv->chip_type = AR8216; break; case 0x0301: - priv->chip = AR8236; + priv->chip_type = AR8236; break; case 0x1000: case 0x1001: - priv->chip = AR8316; + priv->chip_type = AR8316; break; default: printk(KERN_DEBUG @@ -853,7 +853,7 @@ ar8216_config_init(struct phy_device *pdev) goto err_free_priv; if (pdev->addr != 0) { - if (priv->chip == AR8316) { + if (priv->chip_type == AR8316) { pdev->supported |= SUPPORTED_1000baseT_Full; pdev->advertising |= ADVERTISED_1000baseT_Full; @@ -887,9 +887,9 @@ ar8216_config_init(struct phy_device *pdev) } printk(KERN_INFO "%s: AR%d switch driver attached.\n", - pdev->attached_dev->name, priv->chip); + pdev->attached_dev->name, priv->chip_type); - pdev->supported = priv->chip == AR8316 ? + pdev->supported = priv->chip_type == AR8316 ? SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full; pdev->advertising = pdev->supported; @@ -904,7 +904,7 @@ ar8216_config_init(struct phy_device *pdev) swdev->ops = &ar8216_sw_ops; swdev->ports = AR8216_NUM_PORTS; - if (priv->chip == AR8316) { + if (priv->chip_type == AR8316) { swdev->name = "Atheros AR8316"; swdev->vlans = AR8X16_MAX_VLANS; @@ -912,7 +912,7 @@ ar8216_config_init(struct phy_device *pdev) /* port 5 connected to the other mac, therefore unusable */ swdev->ports = (AR8216_NUM_PORTS - 1); } - } else if (priv->chip == AR8236) { + } else if (priv->chip_type == AR8236) { swdev->name = "Atheros AR8236"; swdev->vlans = AR8216_NUM_VLANS; swdev->ports = AR8216_NUM_PORTS; @@ -928,11 +928,11 @@ ar8216_config_init(struct phy_device *pdev) priv->init = true; ret = 0; - if (priv->chip == AR8216) + if (priv->chip_type == AR8216) ret = ar8216_hw_init(priv); - else if (priv->chip == AR8236) + else if (priv->chip_type == AR8236) ret = ar8236_hw_init(priv); - else if (priv->chip == AR8316) + else if (priv->chip_type == AR8316) ret = ar8316_hw_init(priv); if (ret) @@ -945,7 +945,7 @@ ar8216_config_init(struct phy_device *pdev) dev->phy_ptr = priv; /* VID fixup only needed on ar8216 */ - if (pdev->addr == 0 && priv->chip == AR8216) { + if (pdev->addr == 0 && priv->chip_type == AR8216) { pdev->pkt_align = 2; pdev->netif_receive_skb = ar8216_netif_receive_skb; pdev->netif_rx = ar8216_netif_rx; -- cgit v1.1