From 4b0655500ae1be6f15613c77a670680d9eae9991 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Thu, 5 Sep 2013 20:30:34 +0000 Subject: kernel: b53: support phy ids for BCM5365 BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior Signed-off-by: Jonas Gorski SVN-Revision: 37906 --- .../generic/files/drivers/net/phy/b53/b53_mdio.c | 26 +++++++++++++++++++++- .../files/drivers/net/phy/b53/b53_phy_fixup.c | 4 +++- 2 files changed, 28 insertions(+), 2 deletions(-) (limited to 'target/linux/generic/files') diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c b/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c index 1ba0591..6403cc6 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c @@ -373,6 +373,22 @@ static struct phy_driver b53_phy_driver_id2 = { }, }; +/* BCM5365 */ +static struct phy_driver b53_phy_driver_id3 = { + .phy_id = 0x00406000, + .name = "Broadcom B53 (3)", + .phy_id_mask = 0x1ffffc00, + .features = 0, + .probe = b53_phy_probe, + .remove = b53_phy_remove, + .config_aneg = b53_phy_config_aneg, + .config_init = b53_phy_config_init, + .read_status = b53_phy_read_status, + .driver = { + .owner = THIS_MODULE, + }, +}; + int __init b53_phy_driver_register(void) { int ret; @@ -383,13 +399,21 @@ int __init b53_phy_driver_register(void) ret = phy_driver_register(&b53_phy_driver_id2); if (ret) - phy_driver_unregister(&b53_phy_driver_id1); + goto err1; + ret = phy_driver_register(&b53_phy_driver_id3); + if (!ret) + return 0; + + phy_driver_unregister(&b53_phy_driver_id2); +err1: + phy_driver_unregister(&b53_phy_driver_id1); return ret; } void __exit b53_phy_driver_unregister(void) { + phy_driver_unregister(&b53_phy_driver_id3); phy_driver_unregister(&b53_phy_driver_id2); phy_driver_unregister(&b53_phy_driver_id1); } diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_phy_fixup.c b/target/linux/generic/files/drivers/net/phy/b53/b53_phy_fixup.c index 447f30b..72d1373 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_phy_fixup.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_phy_fixup.c @@ -24,6 +24,7 @@ #define B53_BRCM_OUI_1 0x0143bc00 #define B53_BRCM_OUI_2 0x03625c00 +#define B53_BRCM_OUI_3 0x00406000 static int b53_phy_fixup(struct phy_device *dev) { @@ -38,7 +39,8 @@ static int b53_phy_fixup(struct phy_device *dev) phy_id |= mdiobus_read(bus, 0, 3); if ((phy_id & 0xfffffc00) == B53_BRCM_OUI_1 || - (phy_id & 0xfffffc00) == B53_BRCM_OUI_2) { + (phy_id & 0xfffffc00) == B53_BRCM_OUI_2 || + (phy_id & 0xfffffc00) == B53_BRCM_OUI_3) { dev->phy_id = phy_id; } -- cgit v1.1