From 156f2df879fd5afbe1aee2e9d37d81e36195a59b Mon Sep 17 00:00:00 2001 From: Roman Yeryomin Date: Mon, 30 Oct 2017 01:24:26 +0200 Subject: ipq806x: ipq4019: add ap-dk01.1-c1 board support AP-DK01.1-C1 is QCA dev board with: - ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio - 256MB RAM - 32MB SPI flash - QCA8075 multiport ethernet phy (WAN port, 4x LAN ports) First installation via u-boot: sf probe sf erase 0x180000 0x1a00000 tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin sf write 0x84000000 0x180000 $filesize Further upgrades via sysupgrade. Changes: - add partitions - set memory size to 256MB - add reserved memory mapping - add correct compatible string - add image generation - extract pre-cal data from ART partition Compile and run tested. Wirespeed NAT can be achieved with spreading rx interrupts over different cores. Wifi speed is ~550Mbps @5GHz in open air. Note: AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has ipq4028 instead of ipq4018 on board. Changes since v2: - based on dts(i) rework/cleanup submitted: http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html - precise reserved memory mapping - more precise description - compatible string Signed-off-by: Roman Yeryomin --- target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 +++ 1 file changed, 3 insertions(+) (limited to 'target/linux/ipq806x/base-files/lib/ipq806x.sh') diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh index e8ff7ea..940c7ef 100644 --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh @@ -14,6 +14,9 @@ ipq806x_board_detect() { machine=$(cat /proc/device-tree/model) case "$machine" in + *"AP-DK01.1-C1") + name="ap-dk01.1-c1" + ;; *"AP148") name="ap148" ;; -- cgit v1.1