From ba3ad2451426b5a9db9294ed8ebedc7757c2c6e0 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 29 May 2012 16:39:15 +0000
Subject: kirkwood: use uci-defaults to configure different boards

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
---
 .../kirkwood/base-files/etc/uci-defaults/leds      | 57 ++++++++++++++++++++++
 .../kirkwood/base-files/etc/uci-defaults/network   | 42 ++++++++++++++++
 target/linux/kirkwood/base-files/lib/kirkwood.sh   |  5 ++
 3 files changed, 104 insertions(+)
 create mode 100644 target/linux/kirkwood/base-files/etc/uci-defaults/leds
 create mode 100644 target/linux/kirkwood/base-files/etc/uci-defaults/network
 create mode 100644 target/linux/kirkwood/base-files/lib/kirkwood.sh

(limited to 'target/linux/kirkwood/base-files')

diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/leds b/target/linux/kirkwood/base-files/etc/uci-defaults/leds
new file mode 100644
index 0000000..a0b1c1c
--- /dev/null
+++ b/target/linux/kirkwood/base-files/etc/uci-defaults/leds
@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+
+COMMIT_SYSTEM=0
+
+set_led_netdev() {
+	local cfg="led_$1"
+	local sysfs=$2
+	local dev=$3
+
+	uci -q get system.$cfg && return 0
+
+	uci batch <<EOF
+set system.$cfg='led'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.trigger='netdev'
+set system.$cfg.dev='$dev'
+set system.$cfg.mode='link tx rx'
+EOF
+	COMMIT_SYSTEM=1
+}
+
+set_led_default() {
+	local cfg="led_$1"
+	local sysfs=$2
+	local default=$3
+
+	uci -q get system.$cfg && return 0
+
+	uci batch <<EOF
+set system.$cfg='led'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.trigger='none'
+set system.$cfg.default='$default'
+EOF
+	COMMIT_SYSTEM=1
+}
+
+. /lib/kirkwood.sh
+
+hardware=$(kirkwood_hardware_name)
+
+case "$hardware" in
+"Seagate FreeAgent DockStar")
+	set_led_netdev "eth0" "dockstar:orange:misc" "eth0"
+	set_led_default "health" "dockstar:green:health" "1"
+	;;
+
+*)
+	;;
+esac
+
+[ "$COMMIT_SYSTEM" == "1" ] && uci commit system
+
+exit 0
diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/network b/target/linux/kirkwood/base-files/etc/uci-defaults/network
new file mode 100644
index 0000000..48c1232
--- /dev/null
+++ b/target/linux/kirkwood/base-files/etc/uci-defaults/network
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+
+[ -e /etc/config/network ] && exit 0
+
+set_lan_dhcp() {
+	local ifname=$1
+	uci batch <<EOF
+set network.lan='interface'
+set network.lan.ifname='$ifname'
+set network.lan.proto='dhcp'
+EOF
+}
+
+. /lib/functions/uci-defaults.sh
+. /lib/kirkwood.sh
+
+touch /etc/config/network
+
+ucidef_set_interface_loopback
+
+hardware=$(kirkwood_hardware_name)
+
+case "$hardware" in
+"Seagate FreeAgent DockStar")
+	set_lan_dhcp "eth0"
+	;;
+
+"RaidSonic ICY BOX IB-NAS6210")
+	set_lan_dhcp "eth0"
+	;;
+
+*)
+	ucidef_set_interface_lan "eth0"
+	;;
+esac
+
+uci commit network
+
+exit 0
diff --git a/target/linux/kirkwood/base-files/lib/kirkwood.sh b/target/linux/kirkwood/base-files/lib/kirkwood.sh
new file mode 100644
index 0000000..4fcd760
--- /dev/null
+++ b/target/linux/kirkwood/base-files/lib/kirkwood.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+kirkwood_hardware_name() {
+	grep ^Hardware /proc/cpuinfo | sed "s/Hardware.*: \(.*\)/\1/g"
+}
-- 
cgit v1.1