From e557011041da9d646b035e52f2a8010dd0d4205a Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Fri, 1 Jan 2016 21:17:42 +0000
Subject: lantiq: ARV4518PWR01* move redundant parts to dtsi

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48033
---
 target/linux/lantiq/dts/ARV4518PWR01.dts | 179 +------------------------------
 1 file changed, 1 insertion(+), 178 deletions(-)

(limited to 'target/linux/lantiq/dts/ARV4518PWR01.dts')

diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dts b/target/linux/lantiq/dts/ARV4518PWR01.dts
index f2a2e18..7dfdb6f 100644
--- a/target/linux/lantiq/dts/ARV4518PWR01.dts
+++ b/target/linux/lantiq/dts/ARV4518PWR01.dts
@@ -1,192 +1,15 @@
 /dts-v1/;
 
-/include/ "danube.dtsi"
+/include/ "ARV4518PWR01.dtsi"
 
 / {
 	model = "ARV4518PWR01 - SMC7908A-ISP";
 
-	chosen {
-		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 0>;
-		};
-	};
-
 	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "uboot";
-					reg = <0x00000 0x10000>; /* 64 KB */
-					read-only;
-				};
-
-				partition@10000 {
-					label = "uboot_env";
-					reg = <0x10000 0x10000>; /* 64 KB */
-					read-only;
-				};
-
-				partition@20000 {
-					label = "firmware";
-					reg = <0x20000 0x3d0000>;
-				};
-
-				partition@400000 {
-					label = "boardconfig";
-					reg = <0x3f0000 0x10000>;
-					read-only;
-				};
-			};
-
-			gpiomm: gpiomm@4000000 {
-				compatible = "lantiq,gpio-mm";
-				reg = <1 0x0 0x10 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				lantiq,shadow = <0x0>;
-			};
-
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x3f0016 0x6>;
-				mac-increment = <2>;
-			};
-
-			ath5k_eep {
-				compatible = "ath5k,eeprom";
-				reg = <0 0x3f0400 0x1000
-					0 0x3f0016 0x6>;
-				ath,mac-increment = <1>;
-				ath,eep-swap;
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				ebu {
-					lantiq,groups = "ebu cs1";
-					lantiq,function = "ebu";
-				};
-				pci_in {
-					lantiq,groups = "req1", "req2";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1", "gnt2";
-					lantiq,function = "pci";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 14 0>;
-		};
 
 		pci@E105400 {
-			status = "okay";
 			lantiq,internal-clock;
-			gpio-reset = <&gpio 21 0>;
-			req-mask = <0xf>;
-		};
-
-	};
-
-/*
-#define ARV4518PW_SWITCH_RESET          13
-*/
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 28 1>;
-			linux,code = <0xf7>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 1>;
-			linux,code = <0x198>;
 		};
-	};
 
-	gpio-leds {
-		compatible = "gpio-leds";
-		power {
-			label = "power";
-			gpios = <&gpio 3 0>;
-		};
-		dsl {
-			label = "dsl";
-			gpios = <&gpio 4 1>;
-		};
-		online {
-			label = "online";
-			gpios = <&gpio 5 1>;
-		};
-		wifi {
-			label = "wifi";
-			gpios = <&gpio 6 1>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 7 1>;
-		};
-		dsl2 {
-			label = "dsl2";
-			gpios = <&gpio 8 1>;
-		};
-		usb {
-			label = "usb";
-			gpios = <&gpio 19 1>;
-		};
-		voice {
-			label = "voice";
-			gpios = <&gpiomm 0 1>;
-		};
-		fxs1 {
-			label = "fxs1";
-			gpios = <&gpiomm 1 1>;
-		};
-		fxs2 {
-			label = "fxs2";
-			gpios = <&gpiomm 2 1>;
-		};
-		fxo {
-			label = "fxo";
-			gpios = <&gpiomm 3 1>;
-		};
 	};
 };
-- 
cgit v1.1