From b7fc892eb56b52d25bc00578af9d1ee058dcf6b3 Mon Sep 17 00:00:00 2001 From: blogic Date: Mon, 2 May 2016 18:50:18 +0000 Subject: lantiq: move partitions into partion table node Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Mathias Kresin SVN-Revision: 49280 --- target/linux/lantiq/dts/BTHOMEHUBV3A.dts | 56 ++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 25 deletions(-) (limited to 'target/linux/lantiq/dts/BTHOMEHUBV3A.dts') diff --git a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts index 1bf514b..595668f 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts @@ -48,31 +48,37 @@ #size-cells = <1>; req-mask = <0x1>; /* PCI request lines to mask during NAND access */ - partition@0 { - label = "preboot"; - reg = <0x00000 0x8000>; - read-only; - }; - partition@8000 { - label = "u-boot"; - reg = <0x8000 0x05c000>; - read-only; - }; - partition@64000 { - label = "uboot-config"; - reg = <0x64000 0x004000>; - }; - ath9k_cal: partition@68000 { - label = "art-copy"; - reg = <0x68000 0x004000>; - }; - partition@6c000 { - label = "kernel"; - reg = <0x6c000 0x200000>; - }; - partition@26c000 { - label = "ubi"; - reg = <0x26c000 0x1d94000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "preboot"; + reg = <0x00000 0x8000>; + read-only; + }; + partition@8000 { + label = "u-boot"; + reg = <0x8000 0x05c000>; + read-only; + }; + partition@64000 { + label = "uboot-config"; + reg = <0x64000 0x004000>; + }; + ath9k_cal: partition@68000 { + label = "art-copy"; + reg = <0x68000 0x004000>; + }; + partition@6c000 { + label = "kernel"; + reg = <0x6c000 0x200000>; + }; + partition@26c000 { + label = "ubi"; + reg = <0x26c000 0x1d94000>; + }; }; }; -- cgit v1.1