From c7e8b5ebbdfa098436945e1721b34562cd488f6f Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 13 Dec 2014 11:54:57 +0000
Subject: lantiq: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43685
---
.../0020-NET-MIPS-lantiq-adds-xrx200-net.patch | 1413 --------------------
1 file changed, 1413 deletions(-)
delete mode 100644 target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch
(limited to 'target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch')
diff --git a/target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch
deleted file mode 100644
index fc2e04c..0000000
--- a/target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ /dev/null
@@ -1,1413 +0,0 @@
-From 5c7a5ddaf069b7061e1c7b536756b0b70d37b991 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 20/34] NET: MIPS: lantiq: adds xrx200-net
-
----
- drivers/net/ethernet/Kconfig | 8 +-
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/lantiq_pce.h | 163 +++++
- drivers/net/ethernet/lantiq_xrx200.c | 1203 ++++++++++++++++++++++++++++++++++
- 4 files changed, 1374 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -83,7 +83,13 @@ config LANTIQ_ETOP
- tristate "Lantiq SoC ETOP driver"
- depends on SOC_TYPE_XWAY
- ---help---
-- Support for the MII0 inside the Lantiq SoC
-+ Support for the MII0 inside the Lantiq ADSL SoC
-+
-+config LANTIQ_XRX200
-+ tristate "Lantiq SoC XRX200 driver"
-+ depends on SOC_TYPE_XWAY
-+ ---help---
-+ Support for the MII0 inside the Lantiq VDSL SoC
-
- source "drivers/net/ethernet/marvell/Kconfig"
- source "drivers/net/ethernet/mellanox/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -36,6 +36,7 @@ obj-$(CONFIG_IP1000) += icplus/
- obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
- obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_pce.h
-@@ -0,0 +1,163 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * PCE microcode extracted from UGW5.2 switch api
-+ */
-+
-+/* Switch API Micro Code V0.3 */
-+enum {
-+ OUT_MAC0 = 0,
-+ OUT_MAC1,
-+ OUT_MAC2,
-+ OUT_MAC3,
-+ OUT_MAC4,
-+ OUT_MAC5,
-+ OUT_ETHTYP,
-+ OUT_VTAG0,
-+ OUT_VTAG1,
-+ OUT_ITAG0,
-+ OUT_ITAG1, /*10 */
-+ OUT_ITAG2,
-+ OUT_ITAG3,
-+ OUT_IP0,
-+ OUT_IP1,
-+ OUT_IP2,
-+ OUT_IP3,
-+ OUT_SIP0,
-+ OUT_SIP1,
-+ OUT_SIP2,
-+ OUT_SIP3, /*20*/
-+ OUT_SIP4,
-+ OUT_SIP5,
-+ OUT_SIP6,
-+ OUT_SIP7,
-+ OUT_DIP0,
-+ OUT_DIP1,
-+ OUT_DIP2,
-+ OUT_DIP3,
-+ OUT_DIP4,
-+ OUT_DIP5, /*30*/
-+ OUT_DIP6,
-+ OUT_DIP7,
-+ OUT_SESID,
-+ OUT_PROT,
-+ OUT_APP0,
-+ OUT_APP1,
-+ OUT_IGMP0,
-+ OUT_IGMP1,
-+ OUT_IPOFF, /*39*/
-+ OUT_NONE = 63
-+};
-+
-+/* parser's microcode length type */
-+#define INSTR 0
-+#define IPV6 1
-+#define LENACCU 2
-+
-+/* parser's microcode flag type */
-+enum {
-+ FLAG_ITAG = 0,
-+ FLAG_VLAN,
-+ FLAG_SNAP,
-+ FLAG_PPPOE,
-+ FLAG_IPV6,
-+ FLAG_IPV6FL,
-+ FLAG_IPV4,
-+ FLAG_IGMP,
-+ FLAG_TU,
-+ FLAG_HOP,
-+ FLAG_NN1, /*10 */
-+ FLAG_NN2,
-+ FLAG_END,
-+ FLAG_NO, /*13*/
-+};
-+
-+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
-+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
-+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
-+struct pce_microcode {
-+ unsigned short val[4];
-+/* unsigned short val_2;
-+ unsigned short val_1;
-+ unsigned short val_0;*/
-+} pce_microcode[] = {
-+ /* value mask ns fields L type flags ipv4_len */
-+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
-+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
-+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
-+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -0,0 +1,1203 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/etherdevice.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <asm/delay.h>
-+
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_gpio.h>
-+
-+#include <xway_dma.h>
-+#include <lantiq_soc.h>
-+
-+#include "lantiq_pce.h"
-+
-+#define SW_POLLING
-+#define SW_ROUTING
-+#define SW_PORTMAP
-+
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+#define XRX200_MAX_DEV 2
-+ #else
-+#define XRX200_MAX_DEV 2
-+ #endif
-+#else
-+#define XRX200_MAX_DEV 1
-+#endif
-+
-+#define XRX200_MAX_PORT 7
-+#define XRX200_MAX_DMA 8
-+
-+#define XRX200_HEADROOM 4
-+
-+#define XRX200_TX_TIMEOUT (10 * HZ)
-+
-+/* port type */
-+#define XRX200_PORT_TYPE_PHY 1
-+#define XRX200_PORT_TYPE_MAC 2
-+
-+/* DMA */
-+#define XRX200_DMA_CRC_LEN 0x4
-+#define XRX200_DMA_DATA_LEN 0x600
-+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
-+#define XRX200_DMA_RX 0
-+#define XRX200_DMA_TX 1
-+#define XRX200_DMA_IS_TX(x) (x%2)
-+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
-+
-+/* fetch / store dma */
-+#define FDMA_PCTRL0 0x2A00
-+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
-+#define SDMA_PCTRL0 0x2F00
-+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
-+
-+/* buffer management */
-+#define BM_PCFG0 0x200
-+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
-+
-+/* MDIO */
-+#define MDIO_GLOB 0x0000
-+#define MDIO_CTRL 0x0020
-+#define MDIO_READ 0x0024
-+#define MDIO_WRITE 0x0028
-+#define MDIO_PHY0 0x0054
-+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
-+#define MDIO_CLK_CFG0 0x002C
-+#define MDIO_CLK_CFG1 0x0030
-+
-+#define MDIO_GLOB_ENABLE 0x8000
-+#define MDIO_BUSY BIT(12)
-+#define MDIO_RD BIT(11)
-+#define MDIO_WR BIT(10)
-+#define MDIO_MASK 0x1f
-+#define MDIO_ADDRSHIFT 5
-+#define MDIO1_25MHZ 9
-+
-+#define MDIO_PHY_LINK_DOWN 0x4000
-+#define MDIO_PHY_LINK_UP 0x2000
-+
-+#define MDIO_PHY_SPEED_M10 0x0000
-+#define MDIO_PHY_SPEED_M100 0x0800
-+#define MDIO_PHY_SPEED_G1 0x1000
-+
-+#define MDIO_PHY_FDUP_EN 0x0600
-+#define MDIO_PHY_FDUP_DIS 0x0200
-+
-+#define MDIO_PHY_LINK_MASK 0x6000
-+#define MDIO_PHY_SPEED_MASK 0x1800
-+#define MDIO_PHY_FDUP_MASK 0x0600
-+#define MDIO_PHY_ADDR_MASK 0x001f
-+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
-+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
-+
-+/* MII */
-+#define MII_CFG(p) (p * 8)
-+
-+#define MII_CFG_EN BIT(14)
-+
-+#define MII_CFG_MODE_MIIP 0x0
-+#define MII_CFG_MODE_MIIM 0x1
-+#define MII_CFG_MODE_RMIIP 0x2
-+#define MII_CFG_MODE_RMIIM 0x3
-+#define MII_CFG_MODE_RGMII 0x4
-+#define MII_CFG_MODE_MASK 0xf
-+
-+#define MII_CFG_RATE_M2P5 0x00
-+#define MII_CFG_RATE_M25 0x10
-+#define MII_CFG_RATE_M125 0x20
-+#define MII_CFG_RATE_M50 0x30
-+#define MII_CFG_RATE_AUTO 0x40
-+#define MII_CFG_RATE_MASK 0x70
-+
-+/* cpu port mac */
-+#define PMAC_HD_CTL 0x0000
-+#define PMAC_RX_IPG 0x0024
-+#define PMAC_EWAN 0x002c
-+
-+#define PMAC_IPG_MASK 0xf
-+#define PMAC_HD_CTL_AS 0x0008
-+#define PMAC_HD_CTL_AC 0x0004
-+#define PMAC_HD_CTL_RXSH 0x0040
-+#define PMAC_HD_CTL_AST 0x0080
-+#define PMAC_HD_CTL_RST 0x0100
-+
-+/* PCE */
-+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
-+#define PCE_TBL_MASK 0x1120
-+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
-+#define PCE_TBL_ADDR 0x1138
-+#define PCE_TBL_CTRL 0x113c
-+#define PCE_PMAP1 0x114c
-+#define PCE_PMAP2 0x1150
-+#define PCE_PMAP3 0x1154
-+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
-+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
-+
-+#define PCE_TBL_BUSY BIT(15)
-+#define PCE_TBL_CFG_ADDR_MASK 0x1f
-+#define PCE_TBL_CFG_ADWR 0x20
-+#define PCE_TBL_CFG_ADWR_MASK 0x60
-+#define PCE_INGRESS BIT(11)
-+
-+/* MAC */
-+#define MAC_FLEN_REG (0x2314)
-+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
-+
-+/* buffer management */
-+#define BM_PCFG(p) (0x200 + (p * 8))
-+
-+/* special tag in TX path header */
-+#define SPID_SHIFT 24
-+#define DPID_SHIFT 16
-+#define DPID_ENABLE 1
-+#define SPID_CPU_PORT 2
-+#define PORT_MAP_SEL BIT(15)
-+#define PORT_MAP_EN BIT(14)
-+#define PORT_MAP_SHIFT 1
-+#define PORT_MAP_MASK 0x3f
-+
-+#define SPPID_MASK 0x7
-+#define SPPID_SHIFT 4
-+
-+/* MII regs not yet in linux */
-+#define MDIO_DEVAD_NONE (-1)
-+#define ADVERTIZE_MPD (1 << 10)
-+
-+struct xrx200_port {
-+ u8 num;
-+ u8 phy_addr;
-+ u16 flags;
-+ phy_interface_t phy_if;
-+
-+ int link;
-+ int gpio;
-+ enum of_gpio_flags gpio_flags;
-+
-+ struct phy_device *phydev;
-+ struct device_node *phy_node;
-+};
-+
-+struct xrx200_chan {
-+ int idx;
-+ int refcount;
-+ int tx_free;
-+
-+ struct net_device dummy_dev;
-+ struct net_device *devs[XRX200_MAX_DEV];
-+
-+ struct tasklet_struct tasklet;
-+ struct napi_struct napi;
-+ struct ltq_dma_channel dma;
-+ struct sk_buff *skb[LTQ_DESC_NUM];
-+};
-+
-+struct xrx200_hw {
-+ struct clk *clk;
-+ struct mii_bus *mii_bus;
-+
-+ struct xrx200_chan chan[XRX200_MAX_DMA];
-+
-+ struct net_device *devs[XRX200_MAX_DEV];
-+ int num_devs;
-+
-+ int port_map[XRX200_MAX_PORT];
-+ unsigned short wan_map;
-+
-+ spinlock_t lock;
-+};
-+
-+struct xrx200_priv {
-+ struct net_device_stats stats;
-+ int id;
-+
-+ struct xrx200_port port[XRX200_MAX_PORT];
-+ int num_port;
-+ int wan;
-+ unsigned short port_map;
-+ unsigned char mac[6];
-+
-+ struct xrx200_hw *hw;
-+};
-+
-+static __iomem void *xrx200_switch_membase;
-+static __iomem void *xrx200_mii_membase;
-+static __iomem void *xrx200_mdio_membase;
-+static __iomem void *xrx200_pmac_membase;
-+
-+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
-+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
-+#define ltq_switch_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
-+
-+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
-+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
-+#define ltq_mdio_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
-+
-+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
-+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
-+#define ltq_mii_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
-+
-+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
-+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
-+#define ltq_pmac_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
-+
-+static int xrx200_open(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_enable(&priv->hw->chan[i].napi);
-+ ltq_dma_open(&priv->hw->chan[i].dma);
-+ }
-+ priv->hw->chan[i].refcount++;
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+ }
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_start(priv->port[i].phydev);
-+ netif_start_queue(dev);
-+
-+ return 0;
-+}
-+
-+static int xrx200_close(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ int i;
-+
-+ netif_stop_queue(dev);
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_stop(priv->port[i].phydev);
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ priv->hw->chan[i].refcount--;
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_disable(&priv->hw->chan[i].napi);
-+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
-+ }
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+{
-+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
-+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
-+ if (!ch->skb[ch->dma.desc])
-+ return -ENOMEM;
-+
-+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
-+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
-+ DMA_FROM_DEVICE);
-+ ch->dma.desc_base[ch->dma.desc].addr =
-+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+ ch->dma.desc_base[ch->dma.desc].ctl =
-+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+ XRX200_DMA_DATA_LEN;
-+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+
-+ return 0;
-+}
-+
-+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
-+{
-+ struct net_device *dev = ch->devs[id];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - XRX200_DMA_CRC_LEN;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ if (xrx200_alloc_skb(ch)) {
-+ netdev_err(dev,
-+ "failed to allocate new rx buffer, stopping DMA\n");
-+ ltq_dma_close(&ch->dma);
-+ }
-+
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+ skb_put(skb, len);
-+#ifdef SW_ROUTING
-+ skb_pull(skb, 8);
-+#endif
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_receive_skb(skb);
-+ priv->stats.rx_packets++;
-+ priv->stats.rx_bytes+=len;
-+}
-+
-+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+ struct xrx200_chan *ch = container_of(napi,
-+ struct xrx200_chan, napi);
-+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
-+ int rx = 0;
-+ int complete = 0;
-+ unsigned long flags;
-+
-+ while ((rx < budget) && !complete) {
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+#ifdef SW_ROUTING
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ u32 *special_tag = (u32*)skb->data;
-+ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
-+ xrx200_hw_receive(ch, priv->hw->port_map[port]);
-+#else
-+ xrx200_hw_receive(ch, 0);
-+#endif
-+ rx++;
-+ } else {
-+ complete = 1;
-+ }
-+ }
-+ if (complete || !rx) {
-+ napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+ }
-+ return rx;
-+}
-+
-+static void xrx200_tx_housekeeping(unsigned long ptr)
-+{
-+ struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
-+ struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ dev_kfree_skb_any(ch->skb[ch->tx_free]);
-+ ch->skb[ch->tx_free] = NULL;
-+ memset(&ch->dma.desc_base[ch->tx_free], 0,
-+ sizeof(struct ltq_dma_desc));
-+ ch->tx_free++;
-+ ch->tx_free %= LTQ_DESC_NUM;
-+ }
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) {
-+ struct netdev_queue *txq =
-+ netdev_get_tx_queue(ch->devs[i], 0);
-+ if (netif_tx_queue_stopped(txq))
-+ netif_tx_start_queue(txq);
-+ }
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+ ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+}
-+
-+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ return &priv->stats;
-+}
-+
-+static void xrx200_tx_timeout(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
-+
-+ priv->stats.tx_errors++;
-+ netif_wake_queue(dev);
-+}
-+
-+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ int queue = skb_get_queue_mapping(skb);
-+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ unsigned long flags;
-+ u32 byte_offset;
-+ int len;
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
-+ #else
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
-+ #endif
-+#endif
-+
-+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+ netdev_err(dev, "tx ring full\n");
-+ netif_tx_stop_queue(txq);
-+ return NETDEV_TX_BUSY;
-+ }
-+#ifdef SW_ROUTING
-+ #ifdef SW_PORTMAP
-+ special_tag |= priv->port_map << PORT_MAP_SHIFT;
-+ #else
-+ if(priv->id)
-+ special_tag |= (1 << DPID_SHIFT);
-+ #endif
-+ if(skb_headroom(skb) < 4) {
-+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
-+ dev_kfree_skb_any(skb);
-+ skb = tmp;
-+ }
-+ skb_push(skb, 4);
-+ memcpy(skb->data, &special_tag, sizeof(u32));
-+ len += 4;
-+#endif
-+
-+ /* dma needs to start on a 16 byte aligned address */
-+ byte_offset = CPHYSADDR(skb->data) % 16;
-+ ch->skb[ch->dma.desc] = skb;
-+
-+ dev->trans_start = jiffies;
-+
-+ spin_lock_irqsave(&priv->hw->lock, flags);
-+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
-+ DMA_TO_DEVICE)) - byte_offset;
-+ wmb();
-+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+ netif_tx_stop_queue(txq);
-+
-+ priv->stats.tx_packets++;
-+ priv->stats.tx_bytes+=len;
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
-+{
-+ struct xrx200_hw *hw = priv;
-+ int ch = irq - XRX200_DMA_IRQ;
-+
-+ if (ch % 2)
-+ tasklet_schedule(&hw->chan[ch].tasklet);
-+ else
-+ napi_schedule(&hw->chan[ch].napi);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int xrx200_dma_init(struct xrx200_hw *hw)
-+{
-+ int i, err = 0;
-+
-+ ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+ for (i = 0; i < 8 && !err; i++) {
-+ int irq = XRX200_DMA_IRQ + i;
-+ struct xrx200_chan *ch = &hw->chan[i];
-+
-+ ch->idx = ch->dma.nr = i;
-+
-+ if (i == XRX200_DMA_TX) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
-+ } else if (i == XRX200_DMA_RX) {
-+ ltq_dma_alloc_rx(&ch->dma);
-+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+ ch->dma.desc++)
-+ if (xrx200_alloc_skb(ch))
-+ err = -ENOMEM;
-+ ch->dma.desc = 0;
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
-+ } else
-+ continue;
-+
-+ if (!err)
-+ ch->dma.irq = irq;
-+ }
-+
-+ return err;
-+}
-+
-+#ifdef SW_POLLING
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
-+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
-+ u16 miirate = 0;
-+
-+ switch (port->phydev->speed) {
-+ case SPEED_1000:
-+ phyaddr |= MDIO_PHY_SPEED_G1;
-+ miirate = MII_CFG_RATE_M125;
-+ break;
-+
-+ case SPEED_100:
-+ phyaddr |= MDIO_PHY_SPEED_M100;
-+ switch (miimode) {
-+ case MII_CFG_MODE_RMIIM:
-+ case MII_CFG_MODE_RMIIP:
-+ miirate = MII_CFG_RATE_M50;
-+ break;
-+ default:
-+ miirate = MII_CFG_RATE_M25;
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ phyaddr |= MDIO_PHY_SPEED_M10;
-+ miirate = MII_CFG_RATE_M2P5;
-+ break;
-+ }
-+
-+ if (port->phydev->link)
-+ phyaddr |= MDIO_PHY_LINK_UP;
-+ else
-+ phyaddr |= MDIO_PHY_LINK_DOWN;
-+
-+ if (port->phydev->duplex == DUPLEX_FULL)
-+ phyaddr |= MDIO_PHY_FDUP_EN;
-+ else
-+ phyaddr |= MDIO_PHY_FDUP_DIS;
-+
-+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
-+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
-+ udelay(1);
-+}
-+#else
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+
-+}
-+#endif
-+
-+static void xrx200_mdio_link(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_port; i++) {
-+ if (!priv->port[i].phydev)
-+ continue;
-+
-+ if (priv->port[i].link != priv->port[i].phydev->link) {
-+ xrx200_gmac_update(&priv->port[i]);
-+ priv->port[i].link = priv->port[i].phydev->link;
-+ netdev_info(dev, "port %d %s link\n",
-+ priv->port[i].num,
-+ (priv->port[i].link)?("got"):("lost"));
-+ }
-+ }
-+}
-+
-+static inline int xrx200_mdio_poll(struct mii_bus *bus)
-+{
-+ unsigned cnt = 10000;
-+
-+ while (likely(cnt--)) {
-+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
-+ if ((ctrl & MDIO_BUSY) == 0)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return 1;
-+
-+ ltq_mdio_w32(val, MDIO_WRITE);
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ return 0;
-+}
-+
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ return ltq_mdio_r32(MDIO_READ);
-+}
-+
-+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ unsigned val;
-+
-+ phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
-+
-+ if (!phydev) {
-+ netdev_err(dev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
-+ port->phy_if);
-+
-+ if (IS_ERR(phydev)) {
-+ netdev_err(dev, "Could not attach to PHY\n");
-+ return PTR_ERR(phydev);
-+ }
-+
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full
-+ | SUPPORTED_Autoneg
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+ phydev->advertising = phydev->supported;
-+ port->phydev = phydev;
-+
-+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-+ dev->name, phydev->drv->name,
-+ dev_name(&phydev->dev), phydev->irq);
-+
-+#ifdef SW_POLLING
-+ phy_read_status(phydev);
-+
-+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+ val |= ADVERTIZE_MPD;
-+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
-+
-+ phy_start_aneg(phydev);
-+#endif
-+ return 0;
-+}
-+
-+static void xrx200_port_config(struct xrx200_priv *priv,
-+ const struct xrx200_port *port)
-+{
-+ u16 miimode = 0;
-+
-+ switch (port->num) {
-+ case 0: /* xMII0 */
-+ case 1: /* xMII1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* MII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ else
-+ /* MII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_MIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* RMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RMIIM;
-+ else
-+ /* RMII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_RMIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 2: /* internal GPHY0 */
-+ case 3: /* internal GPHY0 */
-+ case 4: /* internal GPHY1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_GMII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 5: /* internal GPHY1 or xMII2 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
-+ MII_CFG(port->num));
-+}
-+
-+static int xrx200_init(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct sockaddr mac;
-+ int err, i;
-+
-+#ifndef SW_POLLING
-+ unsigned int reg = 0;
-+
-+ /* enable auto polling */
-+ for (i = 0; i < priv->num_port; i++)
-+ reg |= BIT(priv->port[i].num);
-+ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
-+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
-+#endif
-+
-+ /* setup each port */
-+ for (i = 0; i < priv->num_port; i++)
-+ xrx200_port_config(priv, &priv->port[i]);
-+
-+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+ if (!is_valid_ether_addr(mac.sa_data)) {
-+ pr_warn("net-xrx200: invalid MAC, using random\n");
-+ eth_random_addr(mac.sa_data);
-+ dev->addr_assign_type |= NET_ADDR_RANDOM;
-+ }
-+
-+ err = eth_mac_addr(dev, &mac);
-+ if (err)
-+ goto err_netdev;
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (xrx200_mdio_probe(dev, &priv->port[i]))
-+ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
-+ priv->port[i].num);
-+
-+ return 0;
-+
-+err_netdev:
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+ return err;
-+}
-+
-+static void xrx200_pci_microcode(void)
-+{
-+ int i;
-+
-+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
-+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
-+ ltq_switch_w32(0, PCE_TBL_MASK);
-+
-+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
-+ ltq_switch_w32(i, PCE_TBL_ADDR);
-+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
-+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
-+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
-+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
-+
-+ // start the table access:
-+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
-+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
-+ }
-+
-+ /* tell the switch that the microcode is loaded */
-+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
-+}
-+
-+static void xrx200_hw_init(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* enable clock gate */
-+ clk_enable(hw->clk);
-+
-+ ltq_switch_w32(1, 0);
-+ mdelay(100);
-+ ltq_switch_w32(0, 0);
-+ /*
-+ * TODO: we should really disbale all phys/miis here and explicitly
-+ * enable them in the device secific init function
-+ */
-+
-+ /* disable port fetch/store dma */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32(0, FDMA_PCTRLx(i));
-+ ltq_switch_w32(0, SDMA_PCTRLx(i));
-+ }
-+
-+ /* enable Switch */
-+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
-+
-+ /* load the pce microcode */
-+ xrx200_pci_microcode();
-+
-+ /* Default unknown Broadcat/Multicast/Unicast port maps */
-+ ltq_switch_w32(0x7f, PCE_PMAP1);
-+ ltq_switch_w32(0x7f, PCE_PMAP2);
-+ ltq_switch_w32(0x7f, PCE_PMAP3);
-+
-+ /* RMON Counter Enable for all physical ports */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFG(i));
-+
-+ /* disable auto polling */
-+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
-+
-+ /* enable port statistic counters */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFGx(i));
-+
-+ /* set IPG to 12 */
-+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
-+
-+#ifdef SW_ROUTING
-+ /* enable status header, enable CRC */
-+ ltq_pmac_w32_mask(0,
-+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC,
-+ PMAC_HD_CTL);
-+#else
-+ /* disable status header, enable CRC */
-+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
-+ PMAC_HD_CTL_AC,
-+ PMAC_HD_CTL);
-+#endif
-+
-+ /* enable port fetch/store dma */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32_mask(0, 0x01, FDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
-+ }
-+
-+ /* enable special tag insertion on cpu port */
-+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
-+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
-+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
-+}
-+
-+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* disable the switch */
-+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
-+
-+ /* free the channels and IRQs */
-+ for (i = 0; i < 2; i++) {
-+ ltq_dma_free(&hw->chan[i].dma);
-+ if (hw->chan[i].dma.irq)
-+ free_irq(hw->chan[i].dma.irq, hw);
-+ }
-+
-+ /* free the allocated RX ring */
-+ for (i = 0; i < LTQ_DESC_NUM; i++)
-+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
-+
-+ /* clear the mdio bus */
-+ mdiobus_unregister(hw->mii_bus);
-+ mdiobus_free(hw->mii_bus);
-+
-+ /* release the clock */
-+ clk_disable(hw->clk);
-+ clk_put(hw->clk);
-+}
-+
-+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
-+{
-+ hw->mii_bus = mdiobus_alloc();
-+ if (!hw->mii_bus)
-+ return -ENOMEM;
-+
-+ hw->mii_bus->read = xrx200_mdio_rd;
-+ hw->mii_bus->write = xrx200_mdio_wr;
-+ hw->mii_bus->name = "lantiq,xrx200-mdio";
-+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+
-+ if (of_mdiobus_register(hw->mii_bus, np)) {
-+ mdiobus_free(hw->mii_bus);
-+ return -ENXIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
-+{
-+ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
-+ struct xrx200_port *p = &priv->port[priv->num_port];
-+
-+ if (!id)
-+ return;
-+
-+ memset(p, 0, sizeof(struct xrx200_port));
-+ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
-+ addr = of_get_property(p->phy_node, "reg", NULL);
-+ if (!addr)
-+ return;
-+
-+ p->num = *id;
-+ p->phy_addr = *addr;
-+ p->phy_if = of_get_phy_mode(port);
-+ if (p->phy_addr > 0x10)
-+ p->flags = XRX200_PORT_TYPE_MAC;
-+ else
-+ p->flags = XRX200_PORT_TYPE_PHY;
-+ priv->num_port++;
-+
-+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
-+ if (gpio_is_valid(p->gpio))
-+ if (!gpio_request(p->gpio, "phy-reset")) {
-+ gpio_direction_output(p->gpio,
-+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
-+ udelay(100);
-+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+ }
-+ /* is this port a wan port ? */
-+ if (priv->wan)
-+ priv->hw->wan_map |= BIT(p->num);
-+
-+ priv->port_map |= BIT(p->num);
-+
-+ /* store the port id in the hw struct so we can map ports -> devices */
-+ priv->hw->port_map[p->num] = priv->hw->num_devs;
-+}
-+
-+static const struct net_device_ops xrx200_netdev_ops = {
-+ .ndo_init = xrx200_init,
-+ .ndo_open = xrx200_open,
-+ .ndo_stop = xrx200_close,
-+ .ndo_start_xmit = xrx200_start_xmit,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_get_stats = xrx200_get_stats,
-+ .ndo_tx_timeout = xrx200_tx_timeout,
-+};
-+
-+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
-+{
-+ struct xrx200_priv *priv;
-+ struct device_node *port;
-+ const __be32 *wan;
-+
-+ /* alloc the network device */
-+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
-+ if (!hw->devs[hw->num_devs])
-+ return;
-+
-+ /* setup the network device */
-+ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
-+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
-+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
-+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
-+
-+ /* setup our private data */
-+ priv = netdev_priv(hw->devs[hw->num_devs]);
-+ priv->hw = hw;
-+ of_get_mac_address_mtd(iface, priv->mac);
-+ priv->id = hw->num_devs;
-+
-+ /* is this the wan interface ? */
-+ wan = of_get_property(iface, "lantiq,wan", NULL);
-+ if (wan && (*wan == 1))
-+ priv->wan = 1;
-+
-+ /* load the ports that are part of the interface */
-+ for_each_child_of_node(iface, port)
-+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
-+ xrx200_of_port(priv, port);
-+
-+ /* register the actual device */
-+ if (!register_netdev(hw->devs[hw->num_devs]))
-+ hw->num_devs++;
-+}
-+
-+static struct xrx200_hw xrx200_hw;
-+
-+static int xrx200_probe(struct platform_device *pdev)
-+{
-+ struct resource *res[4];
-+ struct device_node *mdio_np, *iface_np;
-+ int i;
-+
-+ /* load the memory ranges */
-+ for (i = 0; i < 4; i++) {
-+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res[i]) {
-+ dev_err(&pdev->dev, "failed to get resources\n");
-+ return -ENOENT;
-+ }
-+ }
-+ xrx200_switch_membase = devm_request_and_ioremap(&pdev->dev, res[0]);
-+ xrx200_mdio_membase = devm_request_and_ioremap(&pdev->dev, res[1]);
-+ xrx200_mii_membase = devm_request_and_ioremap(&pdev->dev, res[2]);
-+ xrx200_pmac_membase = devm_request_and_ioremap(&pdev->dev, res[3]);
-+ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
-+ !xrx200_mii_membase || !xrx200_pmac_membase) {
-+ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
-+ return -ENOMEM;
-+ }
-+
-+ /* get the clock */
-+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(xrx200_hw.clk)) {
-+ dev_err(&pdev->dev, "failed to get clock\n");
-+ return PTR_ERR(xrx200_hw.clk);
-+ }
-+
-+ /* bring up the dma engine and IP core */
-+ spin_lock_init(&xrx200_hw.lock);
-+ xrx200_dma_init(&xrx200_hw);
-+ xrx200_hw_init(&xrx200_hw);
-+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
-+
-+ /* bring up the mdio bus */
-+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
-+ "lantiq,xrx200-mdio");
-+ if (mdio_np)
-+ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
-+ dev_err(&pdev->dev, "mdio probe failed\n");
-+
-+ /* load the interfaces */
-+ for_each_child_of_node(pdev->dev.of_node, iface_np)
-+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
-+ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
-+ xrx200_of_iface(&xrx200_hw, iface_np);
-+ else
-+ dev_err(&pdev->dev,
-+ "only %d interfaces allowed\n",
-+ XRX200_MAX_DEV);
-+ }
-+
-+ if (!xrx200_hw.num_devs) {
-+ xrx200_hw_cleanup(&xrx200_hw);
-+ dev_err(&pdev->dev, "failed to load interfaces\n");
-+ return -ENOENT;
-+ }
-+
-+ /* set wan port mask */
-+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
-+
-+ for (i = 0; i < xrx200_hw.num_devs; i++) {
-+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
-+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
-+ }
-+
-+ /* setup NAPI */
-+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
-+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
-+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
-+
-+ platform_set_drvdata(pdev, &xrx200_hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct xrx200_priv *priv;
-+
-+ if (!dev)
-+ return 0;
-+
-+ priv = netdev_priv(dev);
-+
-+ /* free stack related instances */
-+ netif_stop_queue(dev);
-+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
-+
-+ /* shut down hardware */
-+ xrx200_hw_cleanup(&xrx200_hw);
-+
-+ /* remove the actual device */
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id xrx200_match[] = {
-+ { .compatible = "lantiq,xrx200-net" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, xrx200_match);
-+
-+static struct platform_driver xrx200_driver = {
-+ .probe = xrx200_probe,
-+ .remove = xrx200_remove,
-+ .driver = {
-+ .name = "lantiq,xrx200-net",
-+ .of_match_table = xrx200_match,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+module_platform_driver(xrx200_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
-+MODULE_LICENSE("GPL");
--
cgit v1.1