From 25afe99b31f4ef3d835f96545e370770c230ac44 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 2 Nov 2015 10:18:50 +0000 Subject: mediatek: add support for the new MT7623 Arm SoC the support is still WIP. next steps are to make the pmic and ethernet work. this is the first commit to make sure nothing gets lost. Signed-off-by: John Crispin SVN-Revision: 47354 --- ...-thermal-Add-binding-document-for-Mediate.patch | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch (limited to 'target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch') diff --git a/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch b/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch new file mode 100644 index 0000000..c556ac0 --- /dev/null +++ b/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch @@ -0,0 +1,57 @@ +From 9b799b8a4ecbf560f8fb996e8e5147a8f7b9a1b3 Mon Sep 17 00:00:00 2001 +From: Sascha Hauer +Date: Wed, 13 May 2015 10:52:41 +0200 +Subject: [PATCH 22/76] dt-bindings: thermal: Add binding document for + Mediatek thermal controller + +Signed-off-by: Sascha Hauer +--- + .../bindings/thermal/mediatek-thermal.txt | 36 ++++++++++++++++++++ + 1 file changed, 36 insertions(+) + create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt + +diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +new file mode 100644 +index 0000000..adf5d2c +--- /dev/null ++++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +@@ -0,0 +1,36 @@ ++* Mediatek Thermal ++ ++This describes the device tree binding for the Mediatek thermal controller ++which measures the on-SoC temperatures. This device does not have its own ADC, ++instead it directly controls the AUXADC via AHB bus accesses. For this reason ++this device needs phandles to the AUXADC. ++ ++Required properties: ++- compatible: "mediatek,mt8173-thermal" ++- reg: Address range of the thermal controller ++- interrupts: IRQ for the thermal controller ++- clocks, clock-names: Clocks needed for the thermal controller. required ++ clocks are: ++ "therm": Main clock needed for register access ++ "auxadc": The AUXADC clock ++- resets, reset-names: Reference to the reset controller controlling the thermal ++ controller. Required reset-names: ++ "therm": The main reset line ++- auxadc: A phandle to the AUXADC which the thermal controller uses ++- apmixedsys: A phandle to the APMIXEDSYS controller. ++- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description ++ ++Example: ++ ++ thermal: thermal@1100b000 { ++ #thermal-sensor-cells = <1>; ++ compatible = "mediatek,mt8173-thermal"; ++ reg = <0 0x1100b000 0 0x1000>; ++ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; ++ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; ++ clock-names = "therm", "auxadc"; ++ resets = <&pericfg MT8173_PERI_THERM_SW_RST>; ++ reset-names = "therm"; ++ auxadc = <&auxadc>; ++ apmixedsys = <&apmixedsys>; ++ }; +-- +1.7.10.4 + -- cgit v1.1