From 2bf9ea6a31736db059aa97addce3a34b933dacc1 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 6 Feb 2017 11:46:48 +0100 Subject: mvebu: add linux 4.9 support Signed-off-by: Felix Fietkau Signed-off-by: Jonas Gorski --- ...phy-add-802.3-clause-45-support-to-phylib.patch | 323 +++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch (limited to 'target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch') diff --git a/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch b/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch new file mode 100644 index 0000000..8e983cc --- /dev/null +++ b/target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch @@ -0,0 +1,323 @@ +From: Russell King +Date: Thu, 29 Dec 2016 11:03:09 +0000 +Subject: [PATCH] net: phy: add 802.3 clause 45 support to phylib + +Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support. + +Signed-off-by: Russell King +--- + create mode 100644 drivers/net/phy/phy-c45.c + +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -1,7 +1,7 @@ + # Makefile for Linux PHY drivers and MDIO bus drivers + + libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o \ +- phy-core.o ++ phy-c45.o phy-core.o + libphy-$(CONFIG_SWPHY) += swphy.o + + obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o +--- /dev/null ++++ b/drivers/net/phy/phy-c45.c +@@ -0,0 +1,234 @@ ++/* ++ * Clause 45 PHY support ++ */ ++#include ++#include ++#include ++#include ++#include ++ ++/** ++ * genphy_c45_setup_forced - configures a forced speed ++ * @phydev: target phy_device struct ++ */ ++int genphy_c45_pma_setup_forced(struct phy_device *phydev) ++{ ++ int ctrl1, ctrl2, ret; ++ ++ /* Half duplex is not supported */ ++ if (phydev->duplex != DUPLEX_FULL) ++ return -EINVAL; ++ ++ ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); ++ if (ctrl1 < 0) ++ return ctrl1; ++ ++ ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2); ++ if (ctrl2 < 0) ++ return ctrl2; ++ ++ ctrl1 &= ~MDIO_CTRL1_SPEEDSEL; ++ /* PMA/PMD type selection is 1.7.5:0 not 1.7.3:0. See 45.2.1.6.1. */ ++ ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30); ++ ++ switch (phydev->speed) { ++ case SPEED_10: ++ ctrl2 |= MDIO_PMA_CTRL2_10BT; ++ break; ++ case SPEED_100: ++ ctrl1 |= MDIO_PMA_CTRL1_SPEED100; ++ ctrl2 |= MDIO_PMA_CTRL2_100BTX; ++ break; ++ case SPEED_1000: ++ ctrl1 |= MDIO_PMA_CTRL1_SPEED1000; ++ /* Assume 1000base-T */ ++ ctrl2 |= MDIO_PMA_CTRL2_1000BT; ++ break; ++ case SPEED_10000: ++ ctrl1 |= MDIO_CTRL1_SPEED10G; ++ /* Assume 10Gbase-T */ ++ ctrl2 |= MDIO_PMA_CTRL2_10GBT; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1); ++ if (ret < 0) ++ return ret; ++ ++ return phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2); ++} ++EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced); ++ ++/** ++ * genphy_c45_an_disable_aneg - disable auto-negotiation ++ * @phydev: target phy_device struct ++ * ++ * Disable auto-negotiation in the Clause 45 PHY. The link parameters ++ * parameters are controlled through the PMA/PMD MMD registers. ++ * ++ * Returns zero on success, negative errno code on failure. ++ */ ++int genphy_c45_an_disable_aneg(struct phy_device *phydev) ++{ ++ int val; ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); ++ if (val < 0) ++ return val; ++ ++ val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); ++ ++ return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val); ++} ++EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg); ++ ++/** ++ * genphy_c45_restart_aneg - Enable and restart auto-negotiation ++ * @phydev: target phy_device struct ++ * ++ * This assumes that the auto-negotiation MMD is present. ++ * ++ * Enable and restart auto-negotiation. ++ */ ++int genphy_c45_restart_aneg(struct phy_device *phydev) ++{ ++ int val; ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); ++ if (val < 0) ++ return val; ++ ++ val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART; ++ ++ return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val); ++} ++EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg); ++ ++/** ++ * genphy_c45_aneg_done - return auto-negotiation complete status ++ * @phydev: target phy_device struct ++ * ++ * This assumes that the auto-negotiation MMD is present. ++ * ++ * Reads the status register from the auto-negotiation MMD, returning: ++ * - positive if auto-negotiation is complete ++ * - negative errno code on error ++ * - zero otherwise ++ */ ++int genphy_c45_aneg_done(struct phy_device *phydev) ++{ ++ int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); ++ ++ return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0; ++} ++EXPORT_SYMBOL_GPL(genphy_c45_aneg_done); ++ ++/** ++ * genphy_c45_read_link - read the overall link status from the MMDs ++ * @phydev: target phy_device struct ++ * @mmd_mask: MMDs to read status from ++ * ++ * Read the link status from the specified MMDs, and if they all indicate ++ * that the link is up, return positive. If an error is encountered, ++ * a negative errno will be returned, otherwise zero. ++ */ ++int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask) ++{ ++ int val, devad; ++ bool link = true; ++ ++ while (mmd_mask) { ++ devad = __ffs(mmd_mask); ++ mmd_mask &= ~BIT(devad); ++ ++ val = phy_read_mmd(phydev, devad, MDIO_STAT1); ++ if (val < 0) ++ return val; ++ ++ /* Read twice because link state is latched and a ++ * read moves the current state into the register ++ */ ++ val = phy_read_mmd(phydev, devad, MDIO_STAT1); ++ if (val < 0) ++ return val; ++ ++ if (!(val & MDIO_STAT1_LSTATUS)) ++ link = false; ++ } ++ ++ return link; ++} ++EXPORT_SYMBOL_GPL(genphy_c45_read_link); ++ ++/** ++ * genphy_c45_read_lpa - read the link partner advertisment and pause ++ * @phydev: target phy_device struct ++ * ++ * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers, ++ * filling in the link partner advertisment, pause and asym_pause members ++ * in @phydev. This assumes that the auto-negotiation MMD is present, and ++ * the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected ++ * to fill in the remainder of the link partner advert from vendor registers. ++ */ ++int genphy_c45_read_lpa(struct phy_device *phydev) ++{ ++ int val; ++ ++ /* Read the link partner's base page advertisment */ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); ++ if (val < 0) ++ return val; ++ ++ phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(val); ++ phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0; ++ phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0; ++ ++ /* Read the link partner's 10G advertisment */ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); ++ if (val < 0) ++ return val; ++ ++ if (val & MDIO_AN_10GBT_STAT_LP10G) ++ phydev->lp_advertising |= ADVERTISED_10000baseT_Full; ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(genphy_c45_read_lpa); ++ ++/** ++ * genphy_c45_read_pma - read link speed etc from PMA ++ * @phydev: target phy_device struct ++ */ ++int genphy_c45_read_pma(struct phy_device *phydev) ++{ ++ int val; ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); ++ if (val < 0) ++ return val; ++ ++ switch (val & MDIO_CTRL1_SPEEDSEL) { ++ case 0: ++ phydev->speed = SPEED_10; ++ break; ++ case MDIO_PMA_CTRL1_SPEED100: ++ phydev->speed = SPEED_100; ++ break; ++ case MDIO_PMA_CTRL1_SPEED1000: ++ phydev->speed = SPEED_1000; ++ break; ++ case MDIO_CTRL1_SPEED10G: ++ phydev->speed = SPEED_10000; ++ break; ++ default: ++ phydev->speed = SPEED_UNKNOWN; ++ break; ++ } ++ ++ phydev->duplex = DUPLEX_FULL; ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(genphy_c45_read_pma); +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -1390,27 +1390,19 @@ EXPORT_SYMBOL(genphy_read_status); + + static int gen10g_read_status(struct phy_device *phydev) + { +- int devad, reg; + u32 mmd_mask = phydev->c45_ids.devices_in_package; +- +- phydev->link = 1; ++ int ret; + + /* For now just lie and say it's 10G all the time */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + +- for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { +- if (!(mmd_mask & 1)) +- continue; +- +- /* Read twice because link state is latched and a +- * read moves the current state into the register +- */ +- phy_read_mmd(phydev, devad, MDIO_STAT1); +- reg = phy_read_mmd(phydev, devad, MDIO_STAT1); +- if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) +- phydev->link = 0; +- } ++ /* Avoid reading the vendor MMDs */ ++ mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2)); ++ ++ ret = genphy_c45_read_link(phydev, mmd_mask); ++ ++ phydev->link = ret > 0 ? 1 : 0; + + return 0; + } +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -807,6 +807,8 @@ static inline const char *phydev_name(co + void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) + __printf(2, 3); + void phy_attached_info(struct phy_device *phydev); ++ ++/* Clause 22 PHY */ + int genphy_config_init(struct phy_device *phydev); + int genphy_setup_forced(struct phy_device *phydev); + int genphy_restart_aneg(struct phy_device *phydev); +@@ -817,6 +819,16 @@ int genphy_read_status(struct phy_device + int genphy_suspend(struct phy_device *phydev); + int genphy_resume(struct phy_device *phydev); + int genphy_soft_reset(struct phy_device *phydev); ++ ++/* Clause 45 PHY */ ++int genphy_c45_restart_aneg(struct phy_device *phydev); ++int genphy_c45_aneg_done(struct phy_device *phydev); ++int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask); ++int genphy_c45_read_lpa(struct phy_device *phydev); ++int genphy_c45_read_pma(struct phy_device *phydev); ++int genphy_c45_pma_setup_forced(struct phy_device *phydev); ++int genphy_c45_an_disable_aneg(struct phy_device *phydev); ++ + void phy_driver_unregister(struct phy_driver *drv); + void phy_drivers_unregister(struct phy_driver *drv, int n); + int phy_driver_register(struct phy_driver *new_driver, struct module *owner); -- cgit v1.1