From aabce5cf6a31bf82c3df2328f60ca747c6f5b84f Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Tue, 18 Mar 2014 18:54:27 +0000 Subject: switch to the newer DT bindings for wl1xxx Signed-off-by: Imre Kaloz SVN-Revision: 39946 --- ...cumentation-dt-bindings-TI-WiLink-modules.patch | 102 --------------------- 1 file changed, 102 deletions(-) delete mode 100644 target/linux/omap/patches-3.13/908-Documentation-dt-bindings-TI-WiLink-modules.patch (limited to 'target/linux/omap/patches-3.13/908-Documentation-dt-bindings-TI-WiLink-modules.patch') diff --git a/target/linux/omap/patches-3.13/908-Documentation-dt-bindings-TI-WiLink-modules.patch b/target/linux/omap/patches-3.13/908-Documentation-dt-bindings-TI-WiLink-modules.patch deleted file mode 100644 index beee4c8..0000000 --- a/target/linux/omap/patches-3.13/908-Documentation-dt-bindings-TI-WiLink-modules.patch +++ /dev/null @@ -1,102 +0,0 @@ -From patchwork Tue Jul 30 20:21:08 2013 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v3] Documentation: dt: bindings: TI WiLink modules -From: Luciano Coelho -X-Patchwork-Id: 2835914 -Message-Id: <1375215668-29171-1-git-send-email-coelho@ti.com> -To: , -Cc: , , , - , , - , , - , - , , - , -Date: Tue, 30 Jul 2013 23:21:08 +0300 - -Add device tree bindings documentation for the TI WiLink modules. -Currently only the WLAN part of the WiLink6, WiLink7 and WiLink8 -modules is supported. - -Signed-off-by: Luciano Coelho -Reviewed-by: Laurent Pinchart - ---- -In v3, use IRQ_TYPE_LEVEL_HIGH in the example, as suggested by Laurent. - - .../devicetree/bindings/net/wireless/ti-wilink.txt | 68 ++++++++++++++++++++++ - 1 file changed, 68 insertions(+) - create mode 100644 Documentation/devicetree/bindings/net/wireless/ti-wilink.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/net/wireless/ti-wilink.txt -@@ -0,0 +1,68 @@ -+TI WiLink Wireless Modules Device Tree Bindings -+=============================================== -+ -+The WiLink modules provide wireless connectivity, such as WLAN, -+Bluetooth, FM and NFC. -+ -+There are several different modules available, which can be grouped by -+their generation: WiLink6, WiLink7 and WiLink8. WiLink4 is not -+currently supported with device tree. -+ -+Currently, only the WLAN portion of the modules is supported with -+device tree. -+ -+Required properties: -+-------------------- -+ -+- compatible: should be "ti,wilink6", "ti,wilink7" or "ti,wilink8" -+- interrupt-parent: the interrupt controller -+- interrupts: out-of-band WLAN interrupt -+ See the interrupt controller's bindings documentation for -+ detailed definition. -+ -+Optional properties: -+-------------------- -+ -+- clocks: list of clocks needed by the chip as follows: -+ -+ refclock: the internal WLAN reference clock frequency (required for -+ WiLink6 and WiLink7; not used for WiLink8). -+ -+ tcxoclock: the internal WLAN TCXO clock frequency (required for -+ WiLink7 not used for WiLink6 and WiLink8). -+ -+ The clocks must be defined and named accordingly. For example: -+ -+ clocks = <&refclock> -+ clock-names = "refclock"; -+ -+ refclock: refclock { -+ compatible = "ti,wilink-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <38400000>; -+ }; -+ -+ Some modules that contain the WiLink chip provide clocks in the -+ module itself. In this case, we define a "ti,wilink-clock" as shown -+ above. But any other clock could in theory be used, so the proper -+ clock definition should be used. -+ -+ -+Example: -+-------- -+ -+Example definition that can be used in OMAP4 Panda: -+ -+wlan { -+ compatible = "ti,wilink6"; -+ interrupt-parent = <&gpio2>; -+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio line 53 */ -+ clocks = <&refclock>; -+ clock-names = "refclock"; -+ -+ refclock: refclock { -+ compatible = "ti,wilink-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <38400000>; -+ }; -+}; -- cgit v1.1