From 0321740a622fe79cdf958985188cc81476bef192 Mon Sep 17 00:00:00 2001
From: Imre Kaloz <kaloz@openwrt.org>
Date: Mon, 11 Jul 2011 20:35:16 +0000
Subject: upgrade to 3.0-rc6 and optimize for armv5te again
SVN-Revision: 27592
---
.../orion/files/arch/arm/mach-orion5x/dt2-setup.c | 52 +++++++++++-----------
1 file changed, 26 insertions(+), 26 deletions(-)
(limited to 'target/linux/orion/files')
diff --git a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
index 39b7e82..a3d9c82 100644
--- a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
+++ b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
@@ -119,11 +119,11 @@ void __init dt2_pci_preinit(void)
if (gpio_request(pin, "PCI IntA") == 0) {
if (gpio_direction_input(pin) == 0) {
irq = gpio_to_irq(pin);
- set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
printk (KERN_INFO "PCI IntA IRQ: %d\n", irq);
} else {
printk(KERN_ERR "dt2_pci_preinit failed to "
- "set_irq_type pin %d\n", pin);
+ "irq_set_irq_type pin %d\n", pin);
gpio_free(pin);
}
} else {
@@ -134,11 +134,11 @@ void __init dt2_pci_preinit(void)
if (gpio_request(pin, "PCI IntB") == 0) {
if (gpio_direction_input(pin) == 0) {
irq = gpio_to_irq(pin);
- set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
printk (KERN_INFO "PCI IntB IRQ: %d\n", irq);
} else {
printk(KERN_ERR "dt2_pci_preinit failed to "
- "set_irq_type pin %d\n", pin);
+ "irq_set_irq_type pin %d\n", pin);
gpio_free(pin);
}
} else {
@@ -240,28 +240,28 @@ static struct mv_sata_platform_data dt2_sata_data = {
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode dt2_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, // RTC interrupt
- { 1, MPP_GPIO }, // 88e6131 interrupt
- { 2, MPP_GPIO }, // PCI_intB
- { 3, MPP_GPIO }, // PCI_intA
- { 4, MPP_GPIO }, // reset button switch
- { 5, MPP_GPIO },
- { 6, MPP_GPIO },
- { 7, MPP_GPIO },
- { 8, MPP_GPIO },
- { 9, MPP_GIGE }, /* GE_RXERR */
- { 10, MPP_GPIO }, // usb
- { 11, MPP_GPIO }, // usb
- { 12, MPP_GIGE }, // GE_TXD[4]
- { 13, MPP_GIGE }, // GE_TXD[5]
- { 14, MPP_GIGE }, // GE_TXD[6]
- { 15, MPP_GIGE }, // GE_TXD[7]
- { 16, MPP_GIGE }, // GE_RXD[4]
- { 17, MPP_GIGE }, // GE_RXD[5]
- { 18, MPP_GIGE }, // GE_RXD[6]
- { 19, MPP_GIGE }, // GE_RXD[7]
- { -1 },
+static unsigned int dt2_mpp_modes[] __initdata = {
+ MPP0_GPIO, // RTC interrupt
+ MPP1_GPIO, // 88e6131 interrupt
+ MPP2_GPIO, // PCI_intB
+ MPP3_GPIO, // PCI_intA
+ MPP4_GPIO, // reset button switch
+ MPP5_GPIO,
+ MPP6_GPIO,
+ MPP7_GPIO,
+ MPP8_GPIO,
+ MPP9_GIGE, /* GE_RXERR */
+ MPP10_GPIO, // usb
+ MPP11_GPIO, // usb
+ MPP12_GIGE, // GE_TXD[4]
+ MPP13_GIGE, // GE_TXD[5]
+ MPP14_GIGE, // GE_TXD[6]
+ MPP15_GIGE, // GE_TXD[7]
+ MPP16_GIGE, // GE_RXD[4]
+ MPP17_GIGE, // GE_RXD[5]
+ MPP18_GIGE, // GE_RXD[6]
+ MPP19_GIGE, // GE_RXD[7]
+ 0,
};
/*****************************************************************************
--
cgit v1.1