From a5bd8de0bd80b83e43ce90ddc6623890344ad33d Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sat, 20 Jan 2018 09:27:03 +0100 Subject: ramips: add support for D-Link DWR-116-A1/2 The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC. Specification: MediaTek MT7620N (580 Mhz) 32 MB of RAM 8 MB of FLASH 802.11bgn radio 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) 2x external, non-detachable antennas UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1) 6x LED (GPIO-controlled), 2x button JBOOT bootloader Known issues: WAN LED is drived by uartl tx pin. I decide to use this pin as uartlite tx pin. Installation: Apply factory image via http web-gui. Signed-off-by: Pawel Dembicki --- target/linux/ramips/base-files/etc/diag.sh | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ramips/base-files/etc/diag.sh') diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 2e326af..2dcc75a 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -93,6 +93,7 @@ get_status_led() { dir-620-a1|\ dir-620-d1|\ dwr-512-b|\ + dlink,dwr-116-a1|\ gb-pc1|\ gnubee,gb-pc2|\ hpm|\ -- cgit v1.1