From edae3479e64e93275dce4a928ea70279282eef9d Mon Sep 17 00:00:00 2001
From: ZengFei Zhang <zhangzengfei@kunteng.org>
Date: Wed, 22 Feb 2017 20:47:22 +0800
Subject: ramips: add support for HiWiFi HC5962
This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com
Short specification:
- MT7621AT + MT7612EN + 7603EN
- 256MB DDR3 RAM
- 128MB NAND flash
- 1+3 x 1000M Ethernet
- 1x USB 2.0 port. 1x USB 3.0 port.
- reset button
- UART pad on PCB (JP3: TX, RX, GND, 3.3V)
Flash instruction:
1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin
2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/
3, use the following commands:
$ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware
$ mtd erase firmware_backup && reboot
After reboot you should be able to login as root via SSH on 192.168.1.1
Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>
---
target/linux/ramips/base-files/lib/upgrade/platform.sh | 5 +++++
1 file changed, 5 insertions(+)
(limited to 'target/linux/ramips/base-files/lib/upgrade/platform.sh')
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 06931c8..e5e5eb0 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -228,6 +228,10 @@ platform_check_image() {
}
return 0
;;
+ hc5962)
+ # these boards use metadata images
+ return 0
+ ;;
ubnt-erx)
nand_do_platform_check "$board" "$1"
return $?;
@@ -260,6 +264,7 @@ platform_pre_upgrade() {
local board=$(ramips_board_name)
case "$board" in
+ hc5962|\
ubnt-erx)
nand_do_upgrade "$ARGV"
;;
--
cgit v1.1