From 723d8dd74fdcb14465acc5ef5956020054ff9642 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 27 Dec 2011 16:56:30 +0000
Subject: ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board

SVN-Revision: 29612
---
 target/linux/ramips/base-files/etc/diag.sh                       | 3 +++
 .../ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom    | 1 +
 target/linux/ramips/base-files/etc/uci-defaults/network          | 9 +++++++++
 target/linux/ramips/base-files/lib/ramips.sh                     | 3 +++
 target/linux/ramips/base-files/lib/upgrade/platform.sh           | 1 +
 5 files changed, 17 insertions(+)

(limited to 'target/linux/ramips/base-files')

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index edb8376..652787b 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -66,6 +66,9 @@ get_status_led() {
 	whr-g300n)
 		status_led="whr-g300n:green:router"
 		;;
+	wli-tx4-ag300n)
+		status_led="buffalo:blue:power"
+		;;
 	wl-351)
 		status_led="wl-351:amber:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index a1d4887..55c577e 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -60,6 +60,7 @@ case "$FIRMWARE" in
 	wcr-150gn | \
 	whr-g300n | \
 	wl-351 | \
+	wli-tx4-ag300n | \
 	wr512-3gn)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 60dd716..834a2a7 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -30,6 +30,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
 		;;
 
+	wli-tx4-ag300n)
+		ucidef_set_interface_lan "eth0"
+		;;
+
 	rt-n15)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "rtl8366s" "1" "1"
@@ -81,6 +85,11 @@ ramips_setup_macs()
                 lan_mac=$(ramips_get_mac_binary factory 4)
                 wan_mac=$(ramips_get_mac_binary factory 40)
 		;;
+
+	wli-tx4-ag300n)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		;;
+
 	esac
 
 	[ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 4dc10ae..d197fce 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -107,6 +107,9 @@ ramips_board_name() {
 	*"Sitecom WL-351 v1 002")
 		name="wl-351"
 		;;
+	*"WLI-TX4-AG300N")
+		name="wli-tx4-ag300n"
+		;;
 	*"WZR-AGL300NH")
 		name="wzr-agl300nh"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 03a1e7b..aebaf38 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -27,6 +27,7 @@ platform_check_image() {
 	rt-g32-b1 | \
 	rt-n15 | \
 	v22rw-2x2 | \
+	wli-tx4-ag300n | \
 	whr-g300n)
 		[ "$magic" != "2705" ] && {
 			echo "Invalid image type."
-- 
cgit v1.1