From 99c019fb0de82809026922a591e3c4999f845163 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 13 Feb 2012 15:18:04 +0000
Subject: ramips: add preliminary support for the Asus RT-N56U board

SVN-Revision: 30498
---
 target/linux/ramips/base-files/etc/diag.sh                  |  3 +++
 target/linux/ramips/base-files/etc/uci-defaults/network     | 12 ++++++++++++
 target/linux/ramips/base-files/lib/preinit/06_set_iface_mac |  1 +
 target/linux/ramips/base-files/lib/ramips.sh                |  3 +++
 target/linux/ramips/base-files/lib/upgrade/platform.sh      |  1 +
 5 files changed, 20 insertions(+)

(limited to 'target/linux/ramips/base-files')

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index bbadc32..2621604 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -66,6 +66,9 @@ get_status_led() {
 	rt-n15)
 		status_led="rt-n15:blue:power"
 		;;
+	rt-n56u)
+		status_led="asus:blue:power"
+		;;
 	v22rw-2x2)
 		status_led="v22rw-2x2:green:security"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 59d794f..0f97bc3 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -43,6 +43,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t"
 		;;
 
+	rt-n56u)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
+		ucidef_add_switch_vlan "switch0" "2" "4 8t"
+		;;
+
 	wcr-150gn)
 		ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
 		;;
@@ -109,6 +116,11 @@ ramips_setup_macs()
 		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 		;;
 
+	rt-n56u)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		wan_mac=$(ramips_get_mac_binary factory 32772)
+		;;
+
 	w502u)
                 lan_mac=$(ramips_get_mac_binary factory 40)
                 wan_mac=$(ramips_get_mac_binary factory 46)
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 121b471..9f5c024 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -10,6 +10,7 @@ preinit_set_mac_address() {
 	case $(ramips_board_name) in
 	bc2 |\
 	nw718 |\
+	rt-n56u |\
 	esr-9753)
 		mac=$(ramips_get_mac_binary factory 4)
 		mac=$(maccalc or "$mac" "02:00:00:00:00:00")
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5204820..9c1a7dc 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -101,6 +101,9 @@ ramips_board_name() {
 	*"RT-N15")
 		name="rt-n15"
 		;;
+	*"RT-N56U")
+		name="rt-n56u"
+		;;
 	*"Sparklan WCR-150GN")
 		name="wcr-150gn"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2751fdd..2bcfa4b 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -28,6 +28,7 @@ platform_check_image() {
 	omni-emb | \
 	rt-g32-b1 | \
 	rt-n15 | \
+	rt-n56u | \
 	w502u |\
 	wr6202 |\
 	v22rw-2x2 | \
-- 
cgit v1.1