From 3eae19acee79d40ecb151a23f1f79110995f9386 Mon Sep 17 00:00:00 2001 From: Edmunt Pienkowsky Date: Sat, 21 Oct 2017 11:07:43 +0200 Subject: ramips: fix Youku-YK1 support Remove the ephy-pins from the ethernet device tree node. The ephy-pins are useed to controll the ePHY LEDs and this board doesn't have these. Instead one of the ePHY pins is used in GPIO mode to control the WAN LED. Use the switch LED trigger to control the WAN LED. Move the power LED handling to diag.sh to show the boot status via this LED. Add the missing kernel packages for USB and microSD card reader to the default package selection. Fix the maximum image size value. The board has a 32MByte flash chip. Fixes: FS#1055 Signed-off-by: Edmunt Pienkowsky [make the commit message more verbose, remove GPIO pinmux for pins not used as GPIOs] Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/etc/board.d/01_leds | 2 +- target/linux/ramips/base-files/etc/diag.sh | 3 ++- target/linux/ramips/dts/YOUKU-YK1.dts | 3 +-- target/linux/ramips/image/mt7620.mk | 3 ++- 4 files changed, 6 insertions(+), 5 deletions(-) (limited to 'target/linux/ramips') diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 2956def..e8c29fa 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -387,9 +387,9 @@ zte-q7) set_wifi_led "$board:blue:status" ;; youku-yk1) - ucidef_set_led_default "power" "power" "$board:blue:power" "1" set_wifi_led "$board:blue:air" set_usb_led "$board:blue:usb" + ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x10" ;; esac diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index cf3d2ca..fa0391c 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -122,7 +122,8 @@ get_status_led() { wli-tx4-ag300n|\ wt3020|\ y1|\ - y1s) + y1s|\ + youku-yk1) status_led="$board:blue:power" ;; db-wrt01|\ diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts index 260f86a..8c87981 100644 --- a/target/linux/ramips/dts/YOUKU-YK1.dts +++ b/target/linux/ramips/dts/YOUKU-YK1.dts @@ -95,7 +95,7 @@ &pinctrl { state_default: pinctrl0 { default { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; + ralink,group = "i2c", "rgmii1", "ephy", "wled"; ralink,function = "gpio"; }; }; @@ -103,7 +103,6 @@ ðernet { pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; mtd-mac-address = <&factory 0x4>; mediatek,portmap = "llllw"; }; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index ccf8d52..1736d9f 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -382,8 +382,9 @@ TARGET_DEVICES += zte-q7 define Device/youku-yk1 DTS := YOUKU-YK1 - IMAGE_SIZE := $(ralink_default_fw_size_16M) + IMAGE_SIZE := $(ralink_default_fw_size_32M) DEVICE_TITLE := YOUKU YK1 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += youku-yk1 -- cgit v1.1