From 4d5db712e3618a37e85e383da82d131df37ba3e9 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Thu, 26 May 2016 23:11:16 +0200 Subject: lantiq: VGV7510KW22 - fix pinmux configuration The STP pinmux was initially added in assumption LAN2 led is driven by it. It worked somehow because STP group and gphy0 led0 share the GPIO. Do it the right way by adding the gphy0 led0 the gphy function. According to the author, the SPI node is a copy & paste leftover. Which makes sense since nothing is connected to the SPI bus on this device. Signed-off-by: Mathias Kresin --- target/linux/lantiq/dts/VGV7510KW22.dtsi | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) (limited to 'target/linux') diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi index c9045fa..ed3a6e8 100644 --- a/target/linux/lantiq/dts/VGV7510KW22.dtsi +++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi @@ -55,18 +55,11 @@ lantiq,pull = <1>; }; gphy-leds { - lantiq,groups = "gphy0 led1", + lantiq,groups = "gphy0 led0", "gphy0 led1", "gphy1 led0", "gphy1 led1"; lantiq,function = "gphy"; lantiq,open-drain = <0>; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; lantiq,pull = <2>; - lantiq,open-drain = <0>; lantiq,output = <1>; }; mdio { @@ -79,26 +72,9 @@ lantiq,pull = <0>; lantiq,output = <1>; }; - spi { - lantiq,groups = "spi_di", "spi_do", "spi_clk"; - lantiq,function = "spi"; - }; }; }; - stp: stp@E100BB0 { - compatible = "lantiq,gpio-stp-xway"; - reg = <0xE100BB0 0x40>; - #gpio-cells = <2>; - gpio-controller; - - lantiq,shadow = <0xff>; - lantiq,groups = <0x1>; - lantiq,dsl = <0x0>; - lantiq,phy1 = <0x7>; - lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */ - }; - ifxhcd@E101000 { status = "okay"; gpios = <&gpio 47 0>; -- cgit v1.1