From 936511304079e29d09b385ee3fbd1a233465c198 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 12 Aug 2012 12:48:24 +0000
Subject: ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.
Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33142
---
target/linux/ramips/base-files/etc/diag.sh | 2 +-
.../etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 +
.../linux/ramips/base-files/etc/uci-defaults/leds | 4 +-
.../ramips/base-files/etc/uci-defaults/network | 8 +++-
.../ramips/base-files/lib/preinit/06_set_iface_mac | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3 ++
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
.../arch/mips/include/asm/mach-ralink/machine.h | 1 +
.../arch/mips/ralink/rt305x/mach-dir-300-revb.c | 54 ++++++++++++++++++++--
target/linux/ramips/image/Makefile | 12 +++++
10 files changed, 81 insertions(+), 6 deletions(-)
(limited to 'target/linux')
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index c1f5949..b426693 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -36,7 +36,7 @@ get_status_led() {
argus-atp52b)
status_led="argus-atp52b:green:run"
;;
- dir-300-b1 | dir-600-b1 | dir-600-b2)
+ dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-620-a1)
status_led="d-link:green:status"
;;
dap-1350)
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index d293357..392a8e1 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -57,6 +57,7 @@ case "$FIRMWARE" in
all5002 | \
argus-atp52b | \
bc2 | \
+ dir-620-a1 | \
esr-9753 | \
fonera20n | \
freestation5 | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index f8241d3..21804c7 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -26,9 +26,11 @@ case $board in
;;
dir-300-b1|\
dir-600-b1|\
- dir-600-b2)
+ dir-600-b2|\
+ dir-620-a1)
# ANDed with vlan switch port 4 led state
ucidef_set_led_default "wan" "WAN LED (amber)" "d-link:amber:wan" "1"
+ set_wifi_led "rt2800pci-phy0::radio"
;;
esr-9753)
set_wifi_led "rt2800pci-phy0::radio"
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index d1493da..cbb0b85 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -94,7 +94,7 @@ ramips_setup_macs()
;;
3g-6200n | \
argus-atp52b | \
- b2c | \
+ bc2 | \
f5d8235-v1 | \
nw718 | \
psr-680w | \
@@ -122,6 +122,12 @@ ramips_setup_macs()
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
+ dir-620-a1)
+ lan_mac=$(ramips_get_mac_binary factory 4)
+ lan_mac=$(maccalc or "$lan_mac" "02:00:00:00:00:00")
+ wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+ ;;
+
esr-9753 | \
ur-336un)
lan_mac=$(ramips_get_mac_binary devdata 16388)
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index f701b7e..a6c88ed 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -13,6 +13,7 @@ preinit_set_mac_address() {
ifconfig eth0 hw ether $mac 2>/dev/null
;;
bc2 |\
+ dir-620-a1 |\
esr-9753 |\
freestation5 |\
nw718 |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 0089e0d..8dcda48 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -80,6 +80,9 @@ ramips_board_name() {
*"DIR-600 B2")
name="dir-600-b2"
;;
+ *"DIR-620 A1")
+ name="dir-620-a1"
+ ;;
*"DAP-1350")
name="dap-1350"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index eb9a0d1..2548e1d 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -21,6 +21,7 @@ platform_check_image() {
dir-300-b1 | \
dir-600-b1 | \
dir-600-b2 | \
+ dir-620-a1 | \
dap-1350 | \
esr-9753 | \
fonera20n | \
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 50f8688..2de19d7 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -27,6 +27,7 @@ enum ramips_mach_type {
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */
RAMIPS_MACH_DIR_615_D, /* D-Link DIR-615 D */
+ RAMIPS_MACH_DIR_620_A1, /* D-Link DIR-620 A1 */
RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */
RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */
RAMIPS_MACH_NW718, /* Netcore NW718 */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
index e4c5c73..3ae1b78 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
@@ -29,6 +29,12 @@
#define DIR_300B_GPIO_LED_WAN_GREEN 12
#define DIR_300B_GPIO_LED_WAN_AMBER 14
+/*
+ * NOTE: the WPS led in DIR-620 consists of two antiparallel leds,
+ * so they can't be lit simultaneously
+ */
+#define DIR_620_GPIO_LED_WPS_AMBER 11
+
#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */
#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */
@@ -77,7 +83,33 @@ static struct gpio_keys_button dir_300b_gpio_buttons[] __initdata = {
}
};
-static void __init dir_300b_init(void)
+static struct gpio_led dir_620_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:amber:status",
+ .gpio = DIR_300B_GPIO_LED_STATUS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:status",
+ .gpio = DIR_300B_GPIO_LED_STATUS_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:amber:wan",
+ .gpio = DIR_300B_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_300B_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_300B_GPIO_LED_WPS,
+ }, {
+ .name = "d-link:amber:wps",
+ .gpio = DIR_620_GPIO_LED_WPS_AMBER,
+ }
+};
+
+static void __init dir_common_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
@@ -85,8 +117,6 @@ static void __init dir_300b_init(void)
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
- ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
- dir_300b_leds_gpio);
ramips_register_gpio_buttons(-1, DIR_300B_KEYS_POLL_INTERVAL,
ARRAY_SIZE(dir_300b_gpio_buttons),
dir_300b_gpio_buttons);
@@ -94,6 +124,21 @@ static void __init dir_300b_init(void)
rt305x_register_wdt();
}
+static void __init dir_300b_init(void)
+{
+ dir_common_init();
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
+ dir_300b_leds_gpio);
+}
+
+static void __init dir_620a1_init(void)
+{
+ dir_common_init();
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_620_leds_gpio),
+ dir_620_leds_gpio);
+ rt305x_register_usb();
+}
+
MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1",
dir_300b_init);
@@ -105,3 +150,6 @@ MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2",
MIPS_MACHINE(RAMIPS_MACH_DIR_615_D, "DIR-615-D", "D-Link DIR-615 D",
dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_620_A1, "DIR-620-A1", "D-Link DIR-620 A1",
+ dir_620a1_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 5675201..5f42fe8 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -196,6 +196,17 @@ define BuildFirmware/DAP1350/initramfs
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size))
endef
+mtdlayout_dir620a1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
+kernel_size_dir620a1=917504
+rootfs_size_dir620a1=7143424
+define BuildFirmware/DIR620A1
+ $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir620a1)),$(kernel_size_dir620a1),$(rootfs_size_dir620a1))
+endef
+
+define BuildFirmware/DIR620A1/initramfs
+ $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir620a1)),$(kernel_size_dir620a1),$(rootfs_size_dir620a1))
+endef
+
define BuildFirmware/Edimax
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mkedimaximg -i $(call sysupname,$(1),$(2)) \
@@ -365,6 +376,7 @@ define Image/Build/Profile/DIR300B1
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
+ $(call Image/Build/Template/$(fs_squash)/$(1),DIR620A1,dir-620-a1,DIR-620-A1)
endef
define Image/Build/Profile/DAP1350
--
cgit v1.1