From 917670922b4691b622065a8a280a36298e24abd7 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Wed, 24 Oct 2012 21:25:22 +0000
Subject: add support for the Dynalink RTA770BW board

This board id is used by the Siemens Gigaset SE515 router.

SVN-Revision: 33917
---
 .../brcm63xx/patches-3.3/553-board_rta770bw.patch  | 64 ++++++++++++++++++++++
 .../801-ssb_export_fallback_sprom.patch            |  4 +-
 2 files changed, 66 insertions(+), 2 deletions(-)
 create mode 100644 target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch

(limited to 'target')

diff --git a/target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch
new file mode 100644
index 0000000..a1286c9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch
@@ -0,0 +1,64 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -735,6 +735,53 @@ static struct board_info __initdata boar
+ 
+ 	.has_uart0			= 1,
+ };
++
++static struct board_info __initdata board_rta770bw = {
++	.name				= "RTA770BW",
++	.expected_cpu_id		= 0x6345,
++
++	.has_uart0			= 1,
++
++	.has_enet0			= 1,
++
++	.enet0 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "RTA770BW:green:usb",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770BW:green:adsl",
++			.gpio		= 8,
++		},
++		{
++			.name		= "RTA770BW:green:diag",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770BW:green:wlan",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 13,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -3260,6 +3307,7 @@ static const struct board_info __initdat
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	&board_96345gw2,
++	&board_rta770bw,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ 	&board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
index 820a8e8..3e380b1 100644
--- a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -3317,7 +3318,7 @@ static const struct board_info __initdat
+@@ -3365,7 +3366,7 @@ static const struct board_info __initdat
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
  	.revision		= 0x02,
  	.board_rev		= 0x17,
  	.country_code		= 0x0,
-@@ -3337,6 +3338,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -3385,6 +3386,7 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };
-- 
cgit v1.1