From e33584f6b8281e0548ebd2c53463d32118858455 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 14 Jul 2014 17:05:40 +0000 Subject: ramips: squelch mdio debugging info on rt2880 ethernet Use pr_debug rather than pr_info since it is only relevant for debugging. Signed-off-by: Claudio Leite SVN-Revision: 41653 --- .../0220-NET-ralink-squelch_mdio_access.patch | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch (limited to 'target') diff --git a/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch b/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch new file mode 100644 index 0000000..bc92a02 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch @@ -0,0 +1,22 @@ +Index: linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c +=================================================================== +--- linux-3.10.34.orig/drivers/net/ethernet/ralink/mdio_rt2880.c ++++ linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c +@@ -136,7 +136,7 @@ int rt2880_mdio_read(struct mii_bus *bus + if (err) + return 0xffff; + +- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, ++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, + phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff); + + return fe_r32(FE_MDIO_ACCESS) & 0xffff; +@@ -148,7 +148,7 @@ int rt2880_mdio_write(struct mii_bus *bu + int err; + u32 t; + +- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, ++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, + phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff); + + err = rt2880_mdio_wait_ready(priv); -- cgit v1.1